[Samba] Which list for general help?

[Marian Mlcoch, Ing]

Try turn of you firewall.
In fw examples is mean that eth1 is gateway to inet and is strictly filered
as eth0
in your config is gateway eth0 and yuo must change this in firewall ok.
Reply ipchains -L or iptables list...


----- Original Message -----
From: "TheStar" <dogsdostink at ozemail.com.au>
To: "Marian Mlcoch, Ing" <mm at tsmp.sk>
Sent: Tuesday, November 12, 2002 9:15 PM
Subject: Re: [Samba] Which list for general help?


> For my masq settings, etc, I followed the instructions in
> http://www.tldp.org/HOWTO/IP-Masquerade-HOWTO/firewall-examples.html
>
> I used samba 2.2.5
>
> And, adding that lo route doesn't appear to make any difference.
>
> Should I try samba 2.2.6 (or what's the latest)?
>
>
> On Tue, 12 Nov 2002 09:05:55 +0100
> "Marian Mlcoch, Ing" <mm at tsmp.sk> wrote:
>
> > I have route for lo
> > 127.0.0.0       *               255.0.0.0       U     0      0        0
lo
> > and all works fine with eth0 and eth1.
> > Try reply your masq settings and firewall...
> >
> >
> > ----- Original Message -----
> > From: "TheStar" <dogsdostink at ozemail.com.au>
> > To: "Marian Mlcoch, Ing" <mm at tsmp.sk>
> > Sent: Tuesday, November 12, 2002 8:53 AM
> > Subject: Re: [Samba] Which list for general help?
> >
> >
> > > > Your route table is bad...remove first route.
> > > > And missed local loopback if.
> > >
> > > Thanks for the prompt reply...  I was told to put in the first route
by
> > the IP MASQ HOWTO...
> > > But nevertheless, I removed it, but I still have the same problem...
> > >
> > > Here is the 'new' (temporary) routing table...
> > >
> > > root:~# route
> > > Kernel IP routing table
> > > Destination     Gateway         Genmask         Flags Metric Ref
Use
> > Iface
> > > localhost.local *               255.255.255.255 UH    0      0
0 lo
> > > 192.168.1.0     *               255.255.255.0   U     0      0
0
> > eth1
> > > 192.168.0.0     *               255.255.255.0   U     0      0
0
> > eth0
> > > default         192.168.0.1     0.0.0.0         UG    1      0
0
> > eth0
> > > root:~# /usr/samba/bin/findsmb
> > >
> > >                                 *=DMB
> > >                                 +=LMB
> > > IP ADDR         NETBIOS NAME     WORKGROUP/OS/VERSION
> > > ---------------------------------------------------------------------
> > > 192.168.1.2             THEROCK         [       CPCYOUNG      ]
> > > root:~#
> > >
> > > About the 'local loopback' - I've never needed to add that..
> > >
> > > The wierd thing is...  Before I setup masq and before I moved the
localnet
> > > to eth1...  I never had a single problem... Yet, _everything_ else
works
> > > (ping, internet, dhcp, etc)
> > >
> > > > > Here is my routing table...
> > > > >
> > > > > Kernel IP routing table
> > > > > Destination     Gateway         Genmask         Flags Metric Ref
> > Use
> > > > Iface
> > > > > 255.255.255.255 *               255.255.255.255 UH    0      0
> > 0
> > > > eth1
> > > > > 192.168.1.0     *               255.255.255.0   U     0      0
> > 0
> > > > eth1
> > > > > 192.168.0.0     *               255.255.255.0   U     0      0
> > 0
> > > > eth0
> > > > > default         192.168.0.1     0.0.0.0         UG    1      0
> > 0
> > > > eth0
> >