[Samba] Unable to configure 2.2.4 on HPUX 10.20 (locking not available)

[MCCALL,DON (HP-USA,ex1)]

Hello Ed,
It means that you are using the built in C complier shipped with HPUX, which
is not Ansi C compliant.
You'll need to ether go to the gnu.org web site and pull a hpux version of
gcc, or purchase HP's ansi c compliant compiler.
There are a number of messages on the searchable samba archives dealing with
this, if you need more info:

http://marc.theaimsgroup.com/?l=samba&r=1&w=2

Hope this helps,
Don
-----Original Message-----
From: Ed Rodgers [mailto:edr at dtmr.com]
Sent: Wednesday, May 29, 2002 8:54
To: 'samba at lists.samba.org'
Subject: [Samba] Unable to configure 2.2.4 on HPUX 10.20 (locking not
available)


While running configure on samba2.2.4 source on an HP-UX 10.20 OS, I get the
following:

checking configure summary... ERROR: No locking available. Running Samba
would
be unsafe
configure: error: summary failure. Aborting config

What exactly does "No locking available" mean, and is there a workaround?
I'm
currently running version 1.9.15p8 on the same OS.

TIA!
Ed Rodgers
edr at dtmr.com


-- 
To unsubscribe from this list go to the following URL and read the
instructions:  http://lists.samba.org/mailman/listinfo/samba