[Samba] smbd and login scripts
Martin Schweizer
pcservi at spectraweb.ch
Sat Mar 9 09:22:03 GMT 2002
Hello
I've two strange problems:
- smbd
I've attached you my smb.conf, inetd.conf and my log file. Sometimes smbd and
nmbd run and somtimes only nmbd run (I check it with ps -ax). But I have
access over my shares (I test it with my Win95 machine). Also in my log
file there're some error messages (I don't now from where the came).
- login scripts
My scripts won't run but if I start them by doubleclicking in the netlogon
share all works fine.
What is going wrong?
My system:
- FreeBSD 4.5 with Samba 2.2.2
- Windows 95 OSR2
--
Regards
Martin Schweizer
<info at pc-service.ch>
PC-Service M. Schweizer; Gewerbehaus Schwarz; CH-8608 Bubikon
Tel. +41 55 243 30 00; Fax: +41 55 243 33 22; http://www.pc-service.ch
-------------- next part --------------
# $FreeBSD: src/etc/inetd.conf,v 1.44.2.6 2001/10/09 07:47:47 jkh Exp $
#
# Internet server configuration database
#
# Define *both* IPv4 and IPv6 entries for dual-stack support.
# To disable a service, comment it out by prefixing the line with '#'.
# To enable a service, remove the '#' at the beginning of the line.
#
#ftp stream tcp nowait root /usr/libexec/ftpd ftpd -l
#ftp stream tcp6 nowait root /usr/libexec/ftpd ftpd -l
telnet stream tcp nowait root /usr/libexec/telnetd telnetd
#telnet stream tcp6 nowait root /usr/libexec/telnetd telnetd
#shell stream tcp nowait root /usr/libexec/rshd rshd
#shell stream tcp6 nowait root /usr/libexec/rshd rshd
#login stream tcp nowait root /usr/libexec/rlogind rlogind
#login stream tcp6 nowait root /usr/libexec/rlogind rlogind
#finger stream tcp nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
#finger stream tcp6 nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
#exec stream tcp nowait root /usr/libexec/rexecd rexecd
#uucpd stream tcp nowait root /usr/libexec/uucpd uucpd
#nntp stream tcp nowait usenet /usr/libexec/nntpd nntpd
#
# run comsat as root to be able to print partial mailbox contents w/ biff,
# or use the safer tty:tty to just print that new mail has been received.
#comsat dgram udp wait tty:tty /usr/libexec/comsat comsat
#
# ntalk is required for the 'talk' utility to work correctly
#ntalk dgram udp wait tty:tty /usr/libexec/ntalkd ntalkd
#tftp dgram udp wait nobody /usr/libexec/tftpd tftpd /tftpboot
#bootps dgram udp wait root /usr/libexec/bootpd bootpd
#
# "Small servers" -- used to be standard on, but we're more conservative
# about things due to Internet security concerns. Only turn on what you
# need.
#
#daytime stream tcp nowait root internal
#daytime stream tcp6 nowait root internal
#daytime dgram udp wait root internal
#daytime dgram udp6 wait root internal
#time stream tcp nowait root internal
#time stream tcp6 nowait root internal
#time dgram udp wait root internal
#time dgram udp6 wait root internal
#echo stream tcp nowait root internal
#echo dgram udp6 wait root internal
#echo dgram udp wait root internal
#echo stream tcp6 nowait root internal
#discard stream tcp nowait root internal
#discard stream tcp6 nowait root internal
#discard dgram udp wait root internal
#discard dgram udp6 wait root internal
#chargen stream tcp nowait root internal
#chargen stream tcp6 nowait root internal
#chargen dgram udp wait root internal
#chargen dgram udp6 wait root internal
#
# Kerberos authenticated services
#
#klogin stream tcp nowait root /usr/libexec/rlogind rlogind -k
#eklogin stream tcp nowait root /usr/libexec/rlogind rlogind -k -x
#kshell stream tcp nowait root /usr/libexec/rshd rshd -k
#kip stream tcp nowait root /usr/libexec/kipd kipd
#
# CVS servers - for master CVS repositories only! You must set the
# --allow-root path correctly or you open a trivial to exploit but
# deadly security hole.
#
#cvspserver stream tcp nowait root /usr/bin/cvs cvs --allow-root=/your/cvsroot/here pserver
#cvs stream tcp nowait root /usr/bin/cvs cvs --allow-root=/your/cvsroot/here kserver
#
# RPC based services (you MUST have portmapper running to use these)
#
#rstatd/1-3 dgram rpc/udp wait root /usr/libexec/rpc.rstatd rpc.rstatd
#rusersd/1-2 dgram rpc/udp wait root /usr/libexec/rpc.rusersd rpc.rusersd
#walld/1 dgram rpc/udp wait root /usr/libexec/rpc.rwalld rpc.rwalld
#pcnfsd/1-2 dgram rpc/udp wait root /usr/libexec/rpc.pcnfsd rpc.pcnfsd
#rquotad/1 dgram rpc/udp wait root /usr/libexec/rpc.rquotad rpc.rquotad
#sprayd/1 dgram rpc/udp wait root /usr/libexec/rpc.sprayd rpc.sprayd
#
# example entry for the optional pop3 server
#
#pop3 stream tcp nowait root /usr/local/libexec/popper popper
#
# example entry for the optional imap4 server
#
#imap4 stream tcp nowait root /usr/local/libexec/imapd imapd
#
# Return error for all "ident" requests
#
#auth stream tcp nowait root internal
#auth stream tcp6 nowait root internal
#
# Provide internally a real "ident" service which provides ~/.fakeid support,
# provides ~/.noident support, reports UNKNOWN as the operating system type
# and times out after 30 seconds.
#
#auth stream tcp nowait root internal auth -r -f -n -o UNKNOWN -t 30
#auth stream tcp6 nowait root internal auth -r -f -n -o UNKNOWN -t 30
#
# Example entry for an external ident server
#
#auth stream tcp wait root /usr/local/sbin/identd identd -w -t120
#
# Example entry for the optional qmail MTA
# NOTE: This is no longer the correct way to handle incoming SMTP
# connections for qmail. Use tcpserver (http://cr.yp.to/ucspi-tcp.html)
# instead.
#
#smtp stream tcp nowait qmaild /var/qmail/bin/tcp-env tcp-env /var/qmail/bin/qmail-smtpd
#
# Enable the following two entries to enable samba startup from inetd
# (from the Samba documentation). Enable the third entry to enable the swat
# samba configuration tool.
#
netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd smbd
netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd nmbd
-------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4
workgroup = freebsd
# server string is the equivalent of the NT Description field
server string = Samba Server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = 192.168.1. 192.168.2. 127.
# hosts allow = 192.168.1.0/255.255.255.0 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /usr/local/samba/var/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Note: Do NOT use the now deprecated option of "domain controller"
# This option is no longer implemented.
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /usr/local/samba/lib/smb.conf.%m
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = yes
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
logon path = //saturn/netlogon
logon drive = h:
logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = yes
writable = yes
; guest ok = yes
; Un-comment the following and create the netlogon directory for Domain Logons
[netlogon]
comment = Network Logon Service
path = /usr/local/samba/lib/netlogon
guest ok = yes
writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
;[printers]
; comment = All Printers
; path = /usr/spool/samba
; browseable = no
# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
[tmp]
comment = Temporary file space
path = /tmp
user = martin
read only = no
guest ok = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
[martin]
comment = Home Martin Schweizer
path = /usr/home/martin
valid users = martin
guest ok = no
writable = yes
[gabriela]
comment = Home Gabriela Weber
path = /usr/home/gabriela
valid users = gabriela
guest ok = no
writable = yes
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
-------------- next part --------------
[2002/02/10 18:02:55, 0] lib/util_sock.c:write_socket_data(542)
write_socket_data: write failure. Error = Permission denied
[2002/02/10 18:24:21, 0] lib/util_sock.c:write_socket_data(542)
write_socket_data: write failure. Error = Permission denied
[2002/02/17 19:20:33, 0] lib/util_sock.c:write_socket_data(542)
write_socket_data: write failure. Error = Permission denied
[2002/02/19 23:05:06, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/02/20 22:28:24, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/02/27 23:35:27, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/02/27 23:40:29, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/02/27 23:45:25, 0] smbd/server.c:sig_hup(384)
Got SIGHUP
[2002/02/27 23:49:03, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/02/27 23:57:16, 0] smbd/server.c:sig_hup(384)
Got SIGHUP
[2002/02/27 23:57:25, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/02/27 23:58:11, 0] smbd/server.c:sig_hup(384)
Got SIGHUP
[2002/02/27 23:58:18, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/02/27 23:58:24, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service martin
[2002/02/27 23:58:50, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service martin
[2002/02/27 23:59:56, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service martin
[2002/02/28 00:00:45, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/02/28 00:00:51, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service martin
[2002/02/28 00:02:47, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service martin
[2002/02/28 00:06:41, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/02/28 00:08:01, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/02/28 00:10:31, 0] smbd/server.c:sig_hup(384)
Got SIGHUP
[2002/02/28 00:10:31, 0] param/loadparm.c:map_parameter(1986)
Unknown parameter encountered: "share modes"
[2002/02/28 00:10:31, 0] param/loadparm.c:lp_do_parameter(2606)
Ignoring unknown parameter "share modes"
[2002/02/28 00:10:39, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 16:22:26, 0] param/loadparm.c:map_parameter(1986)
Unknown parameter encountered: "share modes"
[2002/03/09 16:22:26, 0] param/loadparm.c:lp_do_parameter(2606)
Ignoring unknown parameter "share modes"
[2002/03/09 16:22:43, 0] smbd/server.c:sig_hup(384)
Got SIGHUP
[2002/03/09 16:22:43, 0] param/loadparm.c:map_parameter(1986)
Unknown parameter encountered: "share modes"
[2002/03/09 16:22:43, 0] param/loadparm.c:lp_do_parameter(2606)
Ignoring unknown parameter "share modes"
[2002/03/09 16:23:04, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 16:28:29, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 16:37:54, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 16:38:54, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 16:49:42, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 16:53:44, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 17:09:10, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 17:21:24, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 17:22:21, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 17:23:10, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 17:23:47, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 17:35:11, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 17:49:57, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
[2002/03/09 17:52:34, 0] smbd/service.c:make_connection(239)
pcwin95 (192.168.1.19) couldn't find service
More information about the samba
mailing list