[Samba] Error
Harry Rüter
harry_rueter at gmx.de
Sat Jun 22 12:45:02 GMT 2002
Hi,
so, where's your codepage-directory ?
How did you configure,
where's samba installed ?
I installed using
configure --prefix=/usr/local/samba
Now the codepages are in
/usr/local/samba/lib/codepages
Check this and it hopefully
will work.
I think you haven't installe samba in /var/tmp/samba, right
?
greets Harry
Terence wrote:
>
> Dear All,
>
> I am getting the following error when trying to issue the following command:
>
> # smbclient -L localhost
>
> load_client_codepage: filename /var/tmp/samba/etc/codepages/codepage.850
> does not exist.
> load_unicode_map: filename /var/tmp/samba/etc/codepages/unicode_map.850 does
> not exist.
> load_unicode_map: filename
> /var/tmp/samba/etc/codepages/unicode_map.ISO8859-1 does not exist.
> added interface ip=172.16.0.1 bcast=172.16.255.255 nmask=255.255.0.0
> Password:
> session setup failed: NT_STATUS_LOGON_FAILURE
>
> I also tried the following
>
> [root at wollabaloo samba]# smbclient -L 172.16.0.1
> load_client_codepage: filename /var/tmp/samba/etc/codepages/codepage.850
> does not exist.
> load_unicode_map: filename /var/tmp/samba/etc/codepages/unicode_map.850 does
> not exist.
> load_unicode_map: filename
> /var/tmp/samba/etc/codepages/unicode_map.ISO8859-1 does not exist.
> added interface ip=172.16.0.1 bcast=172.16.255.255 nmask=255.255.0.0
> session request to 172.16.0.1 failed (Not listening for calling name)
> session request to 172 failed (Not listening for calling name)
> session request to *SMBSERVER failed (Not listening for calling name)
>
> My config file looks like so:
>
> [global]
>
> log file = /var/log/samba-log.%m
> lock directory = /var/lock/samba
> share modes = yes
> interfaces = 172.16.0.1
> encrypt passwords = yes
> smb passwd file = /etc/smbpasswd
> security = user
> hosts allow = 172.16.0
> interfaces = eth1 172.16.0.1
> workgroup = Samba
>
> [homes]
>
> comment = Home Dirs
> browseable = no
> read only = no
> create mode = 0750
>
> [tmp]
> comment = Temp stuff
> path = /tmp
> read only = no
> public = yes
>
> It's 3am and I have banged my head the whole day trying to get this to work.
> I have created the smbclient and exported the passwd file to
> /etc/smbpasswd. I have also run testparm, which doesnt give any errors.
> Can someone out there help me get a simple share up?
>
> I am running Redhat Linux 7.2 Samba 2.2.4-1.i386.
>
> Thanks!
> Terence
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
More information about the samba
mailing list