[Samba] Samba 2.2.5 update process
JKonkol at guidemail.com
Tue Jul 30 10:20:06 GMT 2002
Install the samba sources, look at the .spec file and use the ./configure
command they used. That should get you real close.
> -----Original Message-----
> From: RVNS [mailto:RVNS at naturesmist.com]
> Sent: Tuesday, July 30, 2002 12:14 PM
> To: samba at lists.samba.org
> Subject: [Samba] Samba 2.2.5 update process
> I'm a little confused.
> It appears that the original files are in /etc/samba/ , at
> least the smb.conf, and the new
> ones are in usr/local/samba/lib/smb.conf and nothing
> pertaining to /usr/bin.
> I would like to keep the original configuration of Red Hat
> 7.3 just for consistency
> of Red Hat.
> What type of config command do I execute to make it work or
> how do I change the
> startup script to use the update installation.
> On 30 Jul 2002 at 10:44, Konkol, Josh wrote:
> From: "Konkol, Josh" <JKonkol at guidemail.com>
> To: "'RVNS at naturesmist.com'" <RVNS at naturesmist.com>,
> samba at lists.samba.org Subject: RE: [Samba]
> Samba 2.2.5 update process Date
> sent: Tue, 30 Jul 2002 10:44:30 -0500
> The default prefix is /usr/local/samba. I'm guessing your
> old binaries are
> still located in /usr/bin.
> You can either change your startup script for smb to point to the new
> binaries or re-run your config and specify the correct prefix.
> > -----Original Message-----
> > From: RVNS [mailto:RVNS at naturesmist.com]
> > Sent: Tuesday, July 30, 2002 10:42 AM
> > To: samba at lists.samba.org
> > Subject: [Samba] Samba 2.2.5 update process
> > I recently downloaded the samba 2.2.5 update.
> > I ran GZIP and tar.
> > next i did the configuration according to Using Samba by Robert
> > Eckstein, David Collier-Brown, Peter Kelly 1st edition Nov. 1999.
> > Steps were as follows:
> > ./configure
> > make
> > make install
> > added swat to /etc/services
> > swat 901/tcp
> > after all of this it does not appear that samba was
> actually updated.
> > I looked in samba.org for an update procedure and was not able to
> > locate one.
> > It appears as though the update procedure I used is for a different
> > derivation of unix and not Red Hat 7.3
> > Any help on this issue is greatly appreciated.
> > Thank you.
> > Steve
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: http://lists.samba.org/mailman/listinfo/samba
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
More information about the samba