[Samba] multiple smb deamons
Antonis Lazaridis
antonis_san at hotmail.com
Thu Feb 7 20:59:04 GMT 2002
Thanks,
problem solved! :)
antonis.
>From: "Eric Boehm"<boehm at nortelnetworks.com>
>Reply-To: "Eric Boehm"<boehm at nortelnetworks.com>
>To: Antonis Lazaridis <antonis_san at hotmail.com>
>CC: samba at lists.samba.org
>Subject: Re: [Samba] multiple smb deamons
>Date: Thu, 7 Feb 2002 08:37:57 -0500
>
>On Thu, Feb 07, 2002 at 03:57:46AM +0200, Antonis Lazaridis wrote:
> >>>>> "Antonis" == Antonis Lazaridis <antonis_san at hotmail.com> writes:
>
> Antonis> Hello everybody, i have a question for the list.
>
> Antonis> Q: How do i start multiple smbd's, with different config
> Antonis> files?
>
> Antonis> Here is why i need this, maybe someone has a better idea:
> Antonis> I want to share different folders through differnt
> Antonis> IPs. The reason i want to do this, is to test QoS.
>
> Antonis> Something like this:
>
> Antonis> Folder A: 10 Mbps. Shared through IP1. Folder B: 1
> Antonis> Mbps. Shared through IP2.
>
> Antonis> So, in order to difeerentiate the packets, i want to use
> Antonis> different IPs.
>
>I use a startup file that is included below.
>
>Briefly, I get all the hostnames from /etc/hostname.hme[0-9] and
>/etc/hostname.qfe[0-9] (this is for Solaris 8). I then check to see if
>an smb.conf.${hostname} file exists. If it does, then I start and
>smbd/nmbd pair with the appropriate smb.conf file.
>
>As to the smb.conf.${hostname} file, you have the following
>considerations
>
>You will need to specify
>
>1. log file = /usr/local/samba/var/HOSTNAME/log.%m
>
> directive in order to keep the logs for the daemons separate. Make
> sure the directory exists before you start smbd.
>
>2. interfaces = "IP_ADDRESS/NETMASK"
>
> appropriate to the particular interface. NETMASK can be a bit
> length or full netmask in dotted decimal form. NOTE: One (and only
> one) of the smb.conf files will need
>
> interfaces = "IP_ADDRESS/NETMASK 127.0.0.1/8"
>
>3. socket address = IP_ADDRESS
>
>4. bind interfaces only = yes
>
>5. lock directory = /usr/local/samba/var/HOSTNAME/locks
>
> to keep the locks separate. Make sure the directory exists before
> you start smbd.
>
>6. If you are using "security = domain" then you will need a machine
> account for each interface hostname and you will need to add
>
> netbios name = HOSTNAME
>
> with the appropriate HOSTNAME for each interface
>
>------------------------------------------------------------------------------
>Startup script (/etc/init.d/samba)
>------------------------------------------------------------------------------
>#!/bin/sh
>#ident "@(#)samba.server 1.0 96/06/19 TK" /* SVr4.0 1.1.13.1*/
>#
># Please send info on modifications to knuutila at cs.utu.fi
>#
># This file should have uid root, gid sys and chmod 744
>#
>if [ ! -d /usr/bin ]
>then # /usr not mounted
> exit
>fi
>
>killproc() { # kill the named process(es)
> pid=`/usr/bin/ps -e |
> /usr/bin/grep -w $1 |
> /usr/bin/sed -e 's/^ *//' -e 's/ .*//'`
> [ "$pid" != "" ] && kill $pid
>}
>
># Start/stop processes required for samba server
>SAMBA_HOME="/usr/local/samba"
>SAMBA_BIN="${SAMBA_HOME}/bin"
>SAMBA_LIB="${SAMBA_HOME}/lib"
>SAMBA_VAR="${SAMBA_HOME}/var"
>SMBD="${SAMBA_BIN}/smbd"
>NMBD="${SAMBA_BIN}/nmbd"
>
>DO_INTERFACES=1
>
>case "$1" in
>
>'start')
>#
># Edit these lines to suit your installation (paths, workgroup, host)
>#
> if [ ${DO_INTERFACES} -eq 1 ]
> then
> INTERFACES="`cat /etc/hostname.[hq][mf]e[0-9]`"
> for host in $INTERFACES
> do
> SMB_CONF="${SAMBA_LIB}/smb.conf.${host}"
> [ -r ${SMB_CONF} ] || continue
> ${SMBD} -D -l ${SAMBA_VAR}/${host}/log.smb -s ${SMB_CONF}
> ${NMBD} -D -l ${SAMBA_VAR}/${host}/log -s ${SMB_CONF}
> done
> else
> ${SMBD} -D
> ${NMBD} -D
> fi
> ;;
>'stop')
> killproc nmbd
> killproc smbd
> ;;
>*)
> echo "Usage: /etc/init.d/samba { start | stop }"
> ;;
>esac
>------------------------------------------------------------------------------
>
>Sample smb.conf files. For example, given two interfaces with
>hostnames ZNC0S0K1 and ZRTPS073 (system primary hostname is
>ZNC0S0K1). In my case, all interfaces had the same set of shares from
>smb.conf.shares.znc0s0k1. In your case, you may want different shares
>for the different interfaces.
>
>------------------------------------------------------------------------------
>smb.conf.znc0s0k0
>------------------------------------------------------------------------------#
>Global parameters
> client code page = 437
> # Samba requests 10000 but Solaris has only 1014 to spare
> #max open files = 1014
> comment = "Samba %v server"
> share modes = yes
> getwd cache = yes
> browseable = yes
> load printers = no
> local master = no
> username map = /usr/local/samba/lib/username.map
> debug pid = yes
> dead time = 30
> #debug level = 5
> log file = /usr/local/samba/var/znc0s0k1/log.%m
> socket options = TCP_NODELAY SO_KEEPALIVE SO_SNDBUF=32768 SO_RCVBUF=32768
> include = /usr/local/samba/lib/smb.conf.global.znc0s0k1
> include = /usr/local/samba/lib/smb.conf.shares.%h
>
>------------------------------------------------------------------------------
>smb.conf.global.znc0s0k1
>------------------------------------------------------------------------------
>[global]
> workgroup = PCNTRTP
> security = domain
> password server = PCNTRTP01, ZRTPD0P0, PCNTRTP02
> #workgroup = AMERICASE
> #security = server
> #password server = ZRTPD01T, NRTPDE11, ZRTPD01R, ZRTPD0P0
> encrypt passwords = yes
> wins server = 47.156.160.179
> server string = "DDMS/IPSVC/PNM/SAM21/TOPS/UAS ClearCase VOB Server %h
>(%L), Samba"
> interfaces = "47.142.76.26/24 127.0.0.1/8"
> socket address = 47.142.76.26
> bind interfaces only = yes
> lock directory = /usr/local/samba/var/znc0s0k1/locks
> netbios name = ZNC0S0K1
> shared mem size = 4194304
>
>------------------------------------------------------------------------------
>smb.conf.zrtps073
>------------------------------------------------------------------------------
># Global parameters
> client code page = 437
> # Samba requests 10000 but Solaris has only 1014 to spare
> #max open files = 1014
> comment = "Samba %v server"
> share modes = yes
> getwd cache = yes
> browseable = yes
> load printers = no
> local master = no
> username map = /usr/local/samba/lib/username.map
> debug pid = yes
> dead time = 30
> #debug level = 3
> log file = /usr/local/samba/var/zrtps073/log.%m
> socket options = TCP_NODELAY SO_KEEPALIVE SO_SNDBUF=32768 SO_RCVBUF=32768
> include = /usr/local/samba/lib/smb.conf.global.zrtps073
> include = /usr/local/samba/lib/smb.conf.shares.%h
>
>------------------------------------------------------------------------------
>smb.conf.global.zrtps073
>------------------------------------------------------------------------------
>[global]
> workgroup = PCNTRTP
> security = domain
> password server = PCNTRTP01, PCNTRTP02
> #workgroup = AMERICASE
> #security = server
> #password server = ZRTPD01T, NRTPDE11, ZRTPD01R, ZRTPD0P0
> encrypt passwords = yes
> wins server = 47.156.160.179
> server string = "DDMS/IPSVC/PNM/SAM21/TOPS/UAS ClearCase VOB Server %h
>(%L), Samba"
> interfaces = "47.140.7.210/20"
> socket address = 47.140.7.210
> bind interfaces only = yes
> lock directory = /usr/local/samba/var/zrtps073/locks
> netbios name = ZRTPS073
> shared mem size = 4194304
>
>--
>Eric M. Boehm /"\ ASCII Ribbon Campaign
>boehm at nortelnetworks.com \ / No HTML or RTF in mail
> X No proprietary word-processing
> / \ files in mail
> / \ Respect Open Standards
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
More information about the samba
mailing list