[Samba] cross subnet browse sync problem

[James W. Beauchamp]

Roger that.  It is set via DHCP which points the windoze clients to the WINS
server

James

----- Original Message -----
From: "Joel Hammer" <Joel at HammersHome.com>
To: "James W. Beauchamp" <jbeauchamp7 at mindspring.com>;
<samba at lists.samba.org>
Sent: Thursday, April 11, 2002 7:20 PM
Subject: Re: [Samba] cross subnet browse sync problem


> Have to told your windows machines to use the wins server?
> Joel
> On Thu, Apr 11, 2002 at 04:46:22PM -0500, James W. Beauchamp wrote:
> > Hello all.
> > I have the following setup:
> > 192.168.1.x local lan.
> > 192.168.2.x remote lan - connected by a vpn tunnel.
> >
> > I have a samba server on both ends of the network.  The one on the
> > 192.168.1.x has WINS enabled and samba on the 2.x network is pointed at
the
> > primary via 'wins server=192.168.1.1'.
> > My problem is that I can look in the wins.dat file and see that machines
on
> > the remote net are in the file, along with the workgroup/domain name as
> > well, but the machines don't show up when using Network Neighborhood to
> > browse the remote workgroup.  Does anyone know what I am doing wrong?  I
> > have the remote samba with the remote broswe sync = 192.168.1.1.  Should
I
> > be doing something else?
> >
> > TIA
> >
> > James
> >
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  http://lists.samba.org/mailman/listinfo/samba
>