[Samba] Samba PDC + XP

[mikko at fs.sorl.net]

I seem to have fixed the problem.
I updated to todays CVS 2.2.4-pre release,
and I disabled in both excel and word the "feature" to save
files every 10 minutes for recreation.
The last thing I did, dont know if it makes any difference but
I added:
nt acl support = no
under the [Profiles] section.

so far so good.

/Mikko




>We already have 100Mbit nics and a switch and the
>network performance is very good.
>Power management on the server? I dont think
>i have this enabled, at least not in the bios, I dont think
>RH enables such by default either.
>I have to look closer into what specific files that cause the problem.
>
>/Mikko
>
>
>At 08:05 2002-04-10, you wrote:
>
>>I´ve faced this problem some times,too.
>>In my case after upgrading the nics to 100MBit-lan and disabling the
>>power management on the server the problem disappears.
>>but this mgiht only helps me.....
>>
>>- Peter
>>
>>
>>--
>>To unsubscribe from this list go to the following URL and read the
>>instructions:  http://lists.samba.org/mailman/listinfo/samba
>Hi,
>
>I have a linux rh 7.2 box set up as a samba PDC.
>It works fine, but occationally some files can not be found on the server
>for some reason (when logging in to the domain). This loads the "Default 
>User" profile on the machine as
>a temporary profile. Then I reboot the computer and it logs in fine
>and loads the profile off the PDC with out complaining.
>Did anyone else encounter this problem?
>I'm running samba 2.2.3a.
>
>/Mikko
>
>
>
>--
>To unsubscribe from this list go to the following URL and read the
>instructions:  http://lists.samba.org/mailman/listinfo/samba