[Samba] Samba-LDAP-PDC Howto

[Tarjei Huse]

Also, the correct idealix adress is: 
http://samba.idealx.org/ 

The howto needs some expansion though :)

Tarjei

Gareth Blades wrote:
> 
> I found this quite usefull :-
> http://www.unav.es/cti/ldap-smb/ldap-smb-2_2-howto.html
> 
> I would recomend XFS over a patched ext3 for ACL support as you can download
> a ready made redhat 7.2 kernel which you can just install and you also get
> xfsdump which is a much better tape backup program.
> 
> Once the XFS kernel and the XFS tools (including the devel ones) are
> installed you can compile Samba. I used the latest Samba_2_2 CVS code with
> ldapsam and acl-support.
> 
> You will need to create the basic LDAP structure for your site and then a
> user for Samba to connect as with the correct permissions.
> 
> Then use the above guide to setup the Administrator and nobody accounts and
> things should work.
> 
> I have got Samba file serving on our new server but I have yet to test
> adding machines to the domain.
> 
> > -----Original Message-----
> > From: samba-admin at lists.samba.org [mailto:samba-admin at lists.samba.org]On
> > Behalf Of Mark Bulson
> > Sent: 04 April 2002 18:07
> > To: samba at lists.samba.org
> > Subject: [Samba] Samba-LDAP-PDC Howto
> >
> >
> > Can someone point me to a good Samba-LDAP-PDC Howto.  I've been trying
> > for days to use the howto from www.idealx.org with no success.
> > I keep getting tons of build errors when I try to rebuild the
> > samba-2.2.3a-4 rpm with ldapsam, acl-support, profile, and
> > disable-static.
> > (didn't even see profile, or disable-static on the config options, nor
> > do I think I can use acl-support without XFS)
> >
> > Here's what I have: RH7.2- 2.4.17 (ext3), Latest OpenLdap-2.0.23.src.rpm
> > and latest Samba-2.2.3a-4.src.rpm along with the latest NSS_ldap-184...
> >
> > OK, I don't think it's the instructions, just the user trying to install
> > it (me) but if anyone has run into similar problems, I'd love to hear
> > the potential solutions.  I'm not 'real' new to linux, but I don't have
> > a lot of experience configuring and reconfiguring source and rpms.
> >
> > Thanks for your time and any help you can give!
> >
> > -Mark Bulson
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  http://lists.samba.org/mailman/listinfo/samba
> >
> >
> 
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  http://lists.samba.org/mailman/listinfo/samba