[Samba] How do you enter NT domain users into smb.conf shares?

[Brian Whitehead]

I'm not sure myself.  The quoting is inconsistent.  Even when using the
winbind provided names for other parameters in smb.conf you have to put the
quotes in a different location or not at all.  Just a suggestion to any of
the Samba team members reading this.  I would be nice if this was consistent
across the board.  A wishlist item perhaps.

--
Brian

----- Original Message -----
From: "Kevin Bramblett" <kbramblett at dssresearch.com>
To: "Brian Whitehead" <bwhitehd at earthlink.net>; <samba at lists.samba.org>
Sent: Monday, April 01, 2002 9:24 AM
Subject: Re: [Samba] How do you enter NT domain users into smb.conf shares?


> Thanks, Brian.  I was having difficulty with the space in a name.  This
> helped a lot.
>
> I also found that when one uses chown and chgrp on the folders that one
has
> to use the single quotes around the name instead of the double quotes as
in
> the smb.conf.  I'm just curious why that is.
>
> Thanks again,
> Kevin
>
> ----- Original Message -----
> From: "Brian Whitehead" <bwhitehd at earthlink.net>
> To: "Kevin Bramblett" <kbramblett at dssresearch.com>;
<samba at lists.samba.org>
> Sent: Friday, March 29, 2002 9:47 PM
> Subject: Re: [Samba] How do you enter NT domain users into smb.conf
shares?
>
>
> > If you are using winbind then you use the separator that you configured
in
> > smb.conf.  For example, if you configured the separator as + then you
> would
> > use DOMAIN+user.  If you want to use a group, you would use
@DOMAIN+group.
> > If you you have a group with space in the name, like Domain
> Administrators,
> > you would use @DOMAIN+"Domain Administrators".
> >
> > --
> > Brian
> >
> >
> > ----- Original Message -----
> > From: "Kevin Bramblett" <kbramblett at dssresearch.com>
> > To: <samba at lists.samba.org>
> > Sent: Friday, March 29, 2002 1:48 PM
> > Subject: [Samba] How do you enter NT domain users into smb.conf shares?
> >
> >
> > > I have a W2K network and DC.  My RedHat Linux 7.2 server is a member
> > server
> > > of this domain with security = domain.  I am also running Winbind.
> > >
> > > How do I make a share in my smb.conf file that tells Samba 2.2.3a that
a
> > > certain NT/W2K domain user only or NT/W2K group only has access to
that
> > > share?  Do you use DOMAIN/user or DOMAIN%user or something like that?
> > >
> > > Thanks in advance!
> > > Kevin
> > >
> > >
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions:  http://lists.samba.org/mailman/listinfo/samba
> > >
> >
> >
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  http://lists.samba.org/mailman/listinfo/samba
>