Pause/Resume printing jobs: SOLVED, sorta

Joel Hammer Joel at
Wed Nov 28 19:27:02 GMT 2001

Well, the original post drifted away, so I added a new name, hoping this
won't be overlooked.
This is due to two things:
First, when lpd starts up, it reads lpd.perms, which may reside in
/etc/lpd.perms, other etc locations, and/or in the print queue itself.
lpd.perms is dense, beyond me for now, but, if you make it a one line
configuration file:
then you allow everyone to access the full range of lpc and other commands.
Not very secure but this is troubleshooting. Make sure your firewall is up.
Second, unlike linux, which allows everyone then to alter print jobs in the
queue, windows only allows the owner of the file to alter the print job,
even with DEFAULT ACCEPT as above. Ergo, in a windows environment, this
DEFAULT ACCEPT may not be too serious. A windows user cannot for example
cancel any print jobs other than the ones he owns under the name he logged
into windows with, and, he cannot stop the queue, etc, as far as I can see.
(I would definitely check this out for yourself. By day I examine
gallbladders for a living.) 
So, if the user name in windows is the same as the user name that samba is
working with, and I have made lpd.perms a one line open door as above,
then I can pause and resume jobs. Yeaah!.
However, if the windows user name is different from the user name in samba,
and it will be different if you have a guest login like ftp, then the windows
user cannot pause and resume jobs.  Windows won't let them.
Now, there may be errors in this explanation, since I cannot exhaustively
try every combination of variables and still keep my day job,  but, that is
what I have done and it works.
It is somewhat shocking that a linux tech support hotline wouldn't have
thought of lpd.perms as the reason for this. After all, they do this for
their bread and butter.

On Mon, Nov 26, 2001 at 12:48:41PM -0600, Tony Ricker wrote:
> All,
> 	I have the following in my smb.comf for printing commands...
> # NOTE: If you have a BSD-style print system there is no need to 
> # specifically define each individual printer
> [printers]
>    comment = All Printers
>    path = /var/spool/samba
>    browseable = no
>    print ok = yes
>    print command = /usr/bin/lpr -P%p -r %s
>    lpq command = /usr/bin/lpq -P%p
>    lprm command = /usr/bin/lprm -P%p %j
>    lppause command = /usr/sbin/lpc hold %p %j
>    lpresume command = /usr/sbin/lpc release %p %j
>    queuepause command = /usr/sbin/lpc -P%p stop
>    queueresume command = /usr/sbin/lpc -P%p start
> I got this from a tech guy from Red Hat. When I try to pause a print
> job, it says "You do not have sufficient privaliges to modify this job."
> I did a chmod 777 on /usr/bin and /usr/sbin to no avail. Red Hat support
> (oxymoron) says that they have no idea as to what would be causing this
> (windoze or linux). Any ideas?  Has anyone ran into this? System config
> is Red Hat 7.1 with samba 2.2.2
> Cheers,
> Tony

More information about the samba mailing list