let me say it really loud!!RE: can't login in mornings
Larry Clark
xwindowuser at discflo.com
Wed Jan 24 00:00:27 GMT 2001
I am including my smb.conf file as of right now, I am going to look at a
few more thing in the file itself, and post another message....
Dan Egli wrote:
>
> while everyone else goofs off about this, let me ask if you would send me
> your smb.conf file. I have not experienced this before, but I can compare it
> with our working smb.conf file and warn of any differences I do find.
>
> -- Dan
>
> -----Original Message-----
> From: Larry Clark [mailto:xwindowuser at discflo.com]
> Sent: Tuesday, January 23, 2001 4:16 PM
> To: samba at lists.samba.org
> Subject: let me say it really loud!!RE: can't login in mornings
>
> What is the use of having samba as a server if every morning I have to
> go around to everyones computer and re map the dirves they need? not
> much good in a production setting is it? well I have sent this letter to
> the whole samba team, maybe they will get a clue and work on
> it......hummmmm????
>
> Larry Clark wrote:
> >
> > I am trying this one again, I have a 10/100 mg switched network, NT and
> > novell also run on it. I have two(2) samba servers on the network. in
> > the mornings, when people come in and try to logon, they can logon to
> > the NT and novell servers, yet the logon to the samba servers are slow,
> > and most of the time they cannot connect and ask if next time they want
> > to try to connect, obviuosly they say yes, but this time after the whole
> > weekend, they all came in and cannot lo in. even if I go into the
> > windows explorer and click on the red x'ed out share, they sometimes
> > still don't connect. we have a WINS server on the wire for name
> > resolution, and there is a PDC which the samba server has an account.
> > for the life of me, I can't map a drive and consistently have it connect
> > after the night. mornings are a night mare and noone can connect, any
> > one else have this problem? thanks....
-------------- next part --------------
#
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = discflo
netbios name = penguin
# server string is the equivalent of the NT Description field
server string = Samba Server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = 192.168.0. 127.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = server
# Use password server option only with security = server
password server = discflo_pdc
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
; smb passwd file = /etc/smbpasswd
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
; username map = /etc/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
interfaces = 192.168.0.1/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
remote announce = 192.168.0.255/DISCFLO
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = discflo_pdc
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
; logon script = /home/netlogon/startup.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
wins server = 192.168.0.11
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
#[homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
# [netlogon]
; comment = Network Logon Service
; path = /home/netlogon/
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
[tmp]
comment = Temporary file space
path = /tmp
read only = no
public = yes
browseable = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
[public]
comment = Public Stuff
path = /home/samba
public = yes
read only = no
browseable = yes
[auto]
comment = Autoselect Database
path = /auto
read only = no
public = no
browseable = yes
create mask = 0765
directory mask = 0765
More information about the samba
mailing list