printer errors
Ivan Serina
serina at ing.unibs.it
Thu Dec 6 05:57:03 GMT 2001
Dear samba,
I'm using samba2.2.2 (on a debian potato machine) in a Win2k domain as
print server with lprng LPRng-3.6.22 .
Unfortunately I get the following errors when I try to send a PLT file
from Win2k clients (I haven't this error using win95 clients)
to a HPDesignjet 600 plotter (generated with autocad) using the
following dos command : "copy 1.plt \\linserv\pl-600"
These are the errors:
[2001/12/05 14:09:45, 0] smbd/nttrans.c:call_nt_transact_ioctl(1762)
call_nt_transact_ioctl: Currently not implemented.
[2001/12/05 14:10:57, 0] smbd/service.c:make_connection(239)
cadciv200-01 (192.168.169.102) couldn't find service pl.1050c
[2001/12/05 14:10:57, 0] smbd/service.c:make_connection(239)
cadciv200-01 (192.168.169.102) couldn't find service pl.1050c
[2001/12/05 14:11:35, 0] smbd/nttrans.c:call_nt_transact_ioctl(1762)
call_nt_transact_ioctl: Currently not implemented.
[2001/12/05 14:15:31, 0] lib/util_sock.c:read_socket_data(478)
read_socket_data: recv failure for 4. Error = Connection reset by peer
[2001/12/05 14:19:54, 0] lib/fault.c:fault_report(40)
===============================================================
[2001/12/05 14:19:54, 0] lib/fault.c:fault_report(41)
INTERNAL ERROR: Signal 11 in pid 7958 (2.2.2)
Please read the file BUGS.txt in the distribution
[2001/12/05 14:19:54, 0] lib/fault.c:fault_report(43)
===============================================================
[2001/12/05 14:19:54, 0] lib/util.c:smb_panic(1055)
PANIC: internal error
[2001/12/05 14:22:52, 0] smbd/nttrans.c:call_nt_transact_ioctl(1762)
call_nt_transact_ioctl: Currently not implemented.
[2001/12/05 14:22:59, 0] smbd/nttrans.c:call_nt_transact_ioctl(1762)
call_nt_transact_ioctl: Currently not implemented.
[2001/12/05 14:24:34, 0] lib/fault.c:fault_report(40)
===============================================================
[2001/12/05 14:24:34, 0] lib/fault.c:fault_report(41)
INTERNAL ERROR: Signal 11 in pid 8097 (2.2.2)
Please read the file BUGS.txt in the distribution
[2001/12/05 14:24:34, 0] lib/fault.c:fault_report(43)
===============================================================
[2001/12/05 14:24:34, 0] lib/util.c:smb_panic(1055)
PANIC: internal error
[2001/12/05 14:28:47, 0] lib/fault.c:fault_report(40)
===============================================================
[2001/12/05 14:28:47, 0] lib/fault.c:fault_report(41)
INTERNAL ERROR: Signal 11 in pid 8218 (2.2.2)
Please read the file BUGS.txt in the distribution
[2001/12/05 14:28:47, 0] lib/fault.c:fault_report(43)
===============================================================
[2001/12/05 14:28:47, 0] lib/util.c:smb_panic(1055)
PANIC: internal error
[2001/12/05 14:30:06, 0] lib/fault.c:fault_report(40)
===============================================================
[2001/12/05 14:30:06, 0] lib/fault.c:fault_report(41)
INTERNAL ERROR: Signal 11 in pid 8225 (2.2.2)
Please read the file BUGS.txt in the distribution
[2001/12/05 14:30:06, 0] lib/fault.c:fault_report(43)
===============================================================
[2001/12/05 14:30:06, 0] lib/util.c:smb_panic(1055)
PANIC: internal error
Unfortunatly I haven't found any core file as described in BUGS.txt
PS: using the command "copy /a 1.plt \\linserv\pl-600" samba works
but I can plot raster images
I think that lprng works fine because I have used previously these
commands with lprng and samba 2.0.7 (which works as domain controller).
After the upgrade to 2.2.2 and the join to the win2k domain I have
noted also that the aliases of the printcap file don't work correctly and
the users (on Win2k clients) cannot see the queued files
I'm sending you in attach the smb.conf and the printcap files.
Thank you very much for your kind attention
Ivan Serina
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dr. Ivan Serina
Dip. Ing. Civile e-mail: serina at ing.unibs.it
Univ. degli Studi di Brescia tel. +39-30-3715-807
via Branze, 38 Fax +39-30-3715503
25123 Brescia, Italy
-------------- next part --------------
# /etc/printcap: printer capability database. See printcap(5).
# You can use the filter entries df, tf, cf, gf etc. for
# your own filters. See the printcap(5) manual page for further
# details.
#
hp-laser:\
#|hplj5|hp5simx-civserv|hp-laser:\
:lp=192.168.168.7%9100:\
:sd=/var/spool/lpd/hplj5:\
:ifhp=model=hp5simx,accounting=/usr/local/libexec/filters/newaccount.pl:\
:if=/usr/local/libexec/filters/ifhp:\
:of=/usr/local/libexec/filters/ofhp:\
:as=/usr/local/libexec/filters/account.pl LPRstart:\
:ps=new-acct:\
:sh:mx#0:
# Canon LBP-3260
#canon-laser|lpb3260-labcad|lbp3260-civserv
canon-laser:\
:cm=Canon Laser LBP 3260:\
:sd=/var/spool/lpd/laser:\
:lp=canon-laser%9100:\
:sh:sb:\
:pw#80:pl#66:px#1440:mx#0:\
:lpr_bounce:\
:ifhp=model=lbp3260,accounting=/usr/local/libexec/filters/newaccount.pl:\
:if=/usr/local/libexec/filters/ifhp:\
:of=/usr/local/libexec/filters/ofhp:\
:as=/usr/local/libexec/filters/account.pl LPRstart:\
:ps=new-acct:
hp4050tn:\
:lp=192.167.21.81%9100:\
:sd=/var/spool/lpd/hp4070tn:\
:if=/usr/local/libexec/filters/ifhp:\
:sh:mx#0:
plotter|HP DesignJest 1050C:\
:lp=:sd=/var/spool/lpd/plotter:rm=PLOTTER-1050C:\
:rp=:\
:if=/usr/local/lib/filters/ifhp:\
:of=/usr/local/lib/filters/ofhp:\
:as=|/usr/local/lib/filters/accounting.pl start:\
:ae=|/usr/local/lib/filters/accounting.pl end:\
:vf=/usr/local/lib/filters/ifhp -c:\
:sh:pw#80:pl#66:px#1440:mx#0:\
:af=lp-acct-plotter:lf=lp-errs-plotter:
#
#
bjc-6500:cm=Canon BJC-6500:\
:lp=/dev/lp0:\
:sd=/var/spool/lpd/bjc-6500:\
:af=lp-acct-bjc-6500:\
:lf=lp-errs-bjc-6500:\
:pl#66:\
:pw#80:\
:pc#150:\
:mx#0:\
:sh:
-------------- next part --------------
[global]
#netbios aliases=linserv
netbios name=lincivte
#config file=/etc/samba/smb.conf-%L
workgroup= dipciv
#workgroup= DIPCIV.LOCALE
interfaces = 192.168.168.1/255.255.254.0
#interfaces = 192.168.168.1/255.255.255.0 192.168.169.10/255.255.255.0
allow hosts = 192.168.168. 192.168.169. 127.0.0.
#allow hosts = 192.168.168. 192.167.20. 192.167.22. 192.167.21. 192.168.169. 197.197.199.
wins server=192.168.168.29
name resolve order= hosts wins bcast
# remote announce =192.168.169.255\TESISTICIVILE
# domain master = yes
# local master = yes
# preferred master = yes
# os level = 120
os level =29
printing = LPRNG
# printcap name = /etc/samba/samba.printers
printcap name = /etc/printcap
print command = lpr -h -b -P %p %s ; rm %s
load printers = yes
guest account = nobody
invalid users = root
socket options = TCP_NODELAY
logon script = logon.bat
# this tells Samba tO se a separate log file for each machine
# that connects
# log file = /var/log/samba/log.%I
log file = /var/log/samba/log.samba
# Put a capping on the size of the log files (in Kb).
max log size = 500
# Security mode. Most people will want user level security. See
# security_level.txt for details.
######## security = user
# domain admin users= /etc/samba/admin
# admin users = marba
# domain group map = /etc/samba/domaingroup.map
######domain admin group = @adm
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = Yes
security = DOMAIN
password server = civstud150 licenze
smb passwd file = /etc/samba/smbpasswd
# update encrypted = yes
# unix password sync=yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
domain logons = no
# domain logons = yes
# logon path= \\lincivte\netlogon
[homes]
comment = Home Directories
browseable = yes
read only = no
create mode = 0700
[acctdb]
preexec=/bin/dati_utente %u
comment = Acctdb Directory
browseabLe = yes
read only = no
create mode = 0700
path = %H
[printers]
comment = All Printers
browseable = yes
path = /var/tmp
printable = yes
public = no
writable = no
create mode = 0700
[cdrom]
comment = cdrom
path = /cdrom
public = yes
writable = no
[netdisk]
comment = directory esportata Nuova Versione
path = /users/EXPORT/netdisk
public = yes
read only = no
case sensitive = no
preserve case =no
writeable = yes
guest ok = yes
[rip-ivan]
path=/users/rip
comment = Ripristino laboratorio
read only=no
public=yes
writable=yes
guest ok=yes
[nuovorip]
path=/users/ripristino
comment = Ripristino laboratorio
read only=no
writable=yes
guest ok =yes
; Un-comment the following and create the netlogon directory for Domain Logons
[netlogon]
comment = Samba Network Logon Service
path = /users/netlogon/%a
# path = /users/netlogon/%m
; Case sensitivity breaks logon script processing!!!
case sensitive = no
guest ok = yes
locking = no
writable = yes
; writable = no
public = no
; For browseable say NO if you want to hide the NETLOGON share
browseable = yes
username= %U
create mode =0755
directory mode =0755
[netlogo]
path = /users/netlogon/%a
case sensitive = no
guest ok = yes
locking = no
writable = no
public = no
browseable = yes
username= %U
fstype=FAT
[netlg]
comment = Samba Network Logon Service
path = /users/netlogon/
# path = /users/netlogon/%m
case sensitive = no
guest ok = yes
locking = no
writable = yes
browseable = yes
read only = no
[ftp]
path=/home/ftp-civserv
comment= Anonymous ftp
public=yes
writable=no
[Win95]
path=/users/netlogon/Win95
public=yes
writable=no
[fortran]
comment = directory esportata Nuova Versione
path = /users/EXPORT/fortran
public = yes
read only = no
case sensitive = no
preserve case =no
# writeable = no
guest ok = yes
max connections = 8
create mode =755
[users]
comment = directory esportata Nuova Versione
path = /users/home
public = yes
read only = yes
case sensitive = no
preserve case =no
writeable = no
guest ok = yes
More information about the samba
mailing list