Problems Using the MultipleUsersOnConnection Registry Key in WTS NT4

[MCCALL,DON (HP-USA,ex1)]

Hi Drew,
This is working for me with WinNT 4.0 Terminal Server SP5 (I know you are
using SP6 - i'll try to install that and see if it makes any difference);
The correct value IS 0...  The path is

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Rdr\Parameters

  and the key name IS MultipleUsersOnConnection  as you specify.

And IT WORKS for me - Samba 2.0.7 on HP-UX 11.0, WinNT 4.0 Terminal Server
w/SP5...
I do note that this key is also present and set to 0 in ALL of my
ControlSets... but I wouldn't think that should matter.

I'll let you know what I find out after installing SP6....
Hope this helps,
Don



-----Original Message-----
From: Drew.Zeller at statcan.ca [mailto:Drew.Zeller at statcan.ca]
Sent: Wednesday, April 04, 2001 3:35 PM
To: samba at va.samba.org
Subject: Problems Using the MultipleUsersOnConnection Registry Key in
WTS NT4


Hi.

I am running SAMBA 2.0.7 on HP-UX 11.00 and HP-UX 10.20.

I have tried adding the MultipleUsersOnConnection registry key onto my
Microsoft Windows NT Server 4 Terminal Server Edition servers, running with
Service Pack 6.  After I make this change in the registry and reboot my WTS
servers all my samba connections from the servers are still being made with
one process instead of being split into multiple processes per connection.

I have placed the key into
HKEY_LOCAL_MACHINE\\SYSTEM\CurrentControlSet\Services\Rdr\Parameters and
have tried setting the registry key value to 0 and to 1 (although my
understanding is that the value should be set to 0).  I have also tried
restarting the SAMBA processes on my HP-UX servers after making the registry
change.

Does anyone one have any ideas as to what I might be missing or doing wrong.

Any help would be appreciated.

Thanks in advance.

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  http://lists.samba.org/mailman/listinfo/samba