Samba 2.0.6 spools but doesn't print

[Andrew Lare]

When printing from Windows 95 to IRIX 6.5 Samba 2.0.6 spools
appropriately, but never prints.  The sticky bit for samalp is turned
on, but does not seem to engage.  When using the command directly,
everything prints fine.  The config file is listed below.  Any clues as
to what is wrong?

Thanks in advance for any assistance that you can provide.

Andrew


# Global parameters
[global]
	workgroup = CIRRUS
	netbios name = EOS913C
	passwd program = /usr/bin/passwd %u
	passwd chat = *ew*password:* %n\n *e-enter*new*password:* %n\n
	max log size = 50
	printcap name = /usr/samba/printcap
	os level = 64
	local master = No
	comment = Samba %v
	print command = /usr/samba/bin/sambalp %p %s %U %m
	locking = No
	oplocks = No

[homes]
	comment = Home Directories
	path = /user/%S
	read only = No
	browseable = No
	locking = Yes

[printers]
	comment = All Printers
	path = /usr/tmp
	guest ok = Yes
	print ok = Yes
	browseable = No
	printing = SYSV

[tmp]
	comment = Temporary file space
	path = /usr/tmp
	read only = No
	guest ok = Yes

-- 
|* Dr. Andrew R. Lare
|* Sr. Support Scientist & Project Manager
|* Emergent Information Technologies, Inc.
|* NASA/GSFC Code 913
|* Greenbelt, MD 20771
|*
|* WEBPAGE:   http://climate.gsfc.nasa.gov/~lare/
|* E-MAIL:    Andrew.Lare at gsfc.nasa.gov
|*            lare at eos913c.gsfc.nasa.gov
|* VOICE/FAX: 301-614-6211/301-614-6420
|* OFFICE:    Building 33, Room C306