Win NT with Samba 2.0.x

[Axel Neumann]

I have problems with one Windows NT.

I installed Samba 2.0.2, but that did not helped.

Kari Hurtta wrote:
	>Actually situation gone worst. Adding

	>	   nt support = no

	>halped somewhat (new problems seems disappeared).
	>That new errors was that printing try caused
	>that NT reported about IO-errors.

	>I just want indicate that special nt support
	>code perhaps have some flaws.

You are right there are some flaws with this code. 

I am running Samba 2.0.2 on a SCO OpenServer 5.04 machine and found
that the default setting slows down the access to the shares compared to
the times from Samba 1.9.18p10. After setting "nt smb support = no" 
Samba 2.0.2 responds as fast as 1.9.

Also this fixed another problem that I had with an NT 4.0 SP3 client. If a file 
that is stored on a Samba share is opened from the NT client and printed to 
a Samba printer. Samba creates the empty file Ne01: in the directory where 
file resists. This bug has been reported under PR# 13685.

I will now check if this bug has been fixed in Samba 2.0.3.

Best regards,

Axel Neumann
===================================================================
Cromemco MPCT GmbH                                                 Tel:      Int+49 6172 967860
Dietrich-Bonhoeffer-Str. 4                                                 Fax:    Int+49 6172 304519
D-61350 Bad Homburg                                                    E-Mail: amn at cromemco.com
===================================================================