Configure Banner in Printing

[Aqbal Rail]

Skipped content of type multipart/alternative-------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors. 
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = fka
   guest ok = no
   read only = no
   create mode = 0777
   read list = yes

# Below lines are added by Adam of AIS
   lock directory = /usr/local/samba/var/locks
   share modes = yes

# server string is the equivalent of the NT Description field
   server string = Sunkamarul

# whether or not to allow browsing on the whole network
   browseable = yes

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   load printers = yes

# These printing options are REQUIRED for use with IRIX, Solaris, and HP-UX
   printcap name = /etc/printers.conf
   printing = sysv
   lpq command=/bin/lpstat %p
   lprm command=/bin/cancel %p-%j

# This print command options is RECOMMENDED for use with ESP Print
   print command=/bin/lp -d%p -c -o raw %s -o nobanner; /bin/rm -f %s

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY IPTOS_LOWDELAY IPTOS_THROUGHPUT SO_KEEPALIVE SO_BROADCAST

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
   preserve case = yes
   short preserve case = no

#============================ Share Definitions ==============================
[homes]
  comment = Home Directories
  guest ok = no
  browseable = no
  read only = no
  create mode = 0777
  writable = yes

# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
[printers]
   comment = All Printers
   path = /var/tmp
   browseable = no
   
# Set public = yes to allow user 'guest account' to print
   guest ok = yes
   writable = yes
   printable = yes
   public = yes

# This one is useful for people to share files
[tmp]
  comment = Temporary file space
  path = /tmp
  read only = no
  public = yes

# Below lines are added by Adam of AIS
[ShareKamarul]
   path = /export/home/kamarul/sharedir
   read only = no
   guest account = nobody
   guest ok = no
   public = yes
   
# A publicly accessible directory, but read only, except for people in
# the "staff" group
[public]
   comment = Public Stuff
   path = export/home/samba
   public = yes
   writable = yes
   printable = yes
   write list = @staff

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765


-------------- next part --------------
#
#	If you hand edit this file, comments and structure may change.
#	The preferred method of modifying this file is through the use of
#	lpset(1M) or fncreate_printer(1M)
#
6mp1:\
	:bsdaddr=sunkamarul,6mp1,Solaris:\
	:description=HP Laserjet 6MP - Both:
_default:\
	:use=6mp1:
6mp2:\
	:bsdaddr=sunkamarul,6mp2,Solaris:\
	:description=HP Laserjet 6MP - Any: