samba problem...

[Luke Miller]

I am getting a wierd message with samba, I am running linux:

bash# uname -a
Linux sparkbox 2.0.0 #2 Tue Jun 11 07:12:12 CDT 1996 i486

I am running the newest version of samba (samba-1.9.18p3).

The system I am on it acting as gateway for an internal network (ethernet)
and an outside network (modem with ppp).

my netstat looks like:

bash# netstat -rn
Kernel routing table
Destination     Gateway         Genmask         Flags Metric Ref Use  Iface
198.68.22.140   0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0      459 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0      302 lo
0.0.0.0         0.0.0.0         0.0.0.0         U     0      0     2507 ppp0


I compiled it with no problems and go to run it and get this in the logs:

bind failed on port 139 socket_addr=0.0.0.0 (Address already in use)

So I the following line to my smb.conf, which is one of it's IP addresses:

socket address= 198.68.22.63

and I get this in the logs:

bind failed on port 139 socket_addr=198.68.22.63 (Address already in use)

I have also tried this for the other IP address as well.

Any help would be greatly apprecated.

Luke



      *************************************************************
      *      Luke Miller        Assistant Systems Administrator   *
      *   millerlu at peak.org               541-754-7325            *
      *************************************************************