ip_masq+dhcpd+samba+2nics

[Daniel Eischen]

> Just for others on the list..
> "barfing" meaning it gives some errors and refuses to start. I have sense
> gotten it to at least work with  ip_aliasing the "external" interface NIC
> card, and configured the other NIC card to not be
> configured upon boot up in order to get DHCPD to run correctly.
> If it sees the other nic card upon boot..it.. "blows" , just doesn't run.
> Hope this helps.. 
> Is anyone else running  DHCPD with two NIC cards installed on there box,
> and have dhcpd serving clients from ONE of those NIC's?

How about 4 NICs, DHCPD on 3 of them, and NATD (ip masquerading) on 1 of
them?

de0 <Digital 21140A Fast Ethernet> rev 32 int a irq 12 on pci0:10:0
de0: 21140A [10-100Mb/s] pass 2.0
de0: address 00:80:c8:3e:34:02
de1 <Digital 21040 Ethernet> rev 35 int a irq 10 on pci0:11:0
de1: 21040 [10Mb/s] pass 2.3
de1: address 00:c0:d1:30:08:02
ed0 at 0x310-0x31f irq 5 maddr 0xcc000 msize 8192 on isa
ed0: address 02:60:8c:a2:d5:b3, type 3c503 (8 bit) 
ep0 at 0x300-0x30f irq 15 on isa
ep0: aui/utp[*AUI*] address 00:a0:24:0a:ed:f6

DHCPD on de0, de1, and ed0.
NATD on ep0.

This is with dhcp-2.0b1pl1 on FreeBSD, not Linux, though...

Dan Eischen
eischen at no-spam.vigrid.com