NT - Not allowed from this workstation

Luke Kenneth Casson Leighton lkcl at switchboard.net
Sat Jan 31 00:25:59 GMT 1998


On Fri, 30 Jan 1998, Randy Sims wrote:

> Luke Kenneth Casson Leighton <lkcl at switchboard.net> writes:
> 
> > > Everything works OK, but (actually BUT, as in big problem) we cannot
> > > access the samba server.  We get the Enter Network Password from NT
> > > with the message ...
> > > 
> > > 	"Incorrect password or unknown username for:
> > > 
> > > 		\\<samba server>
> > > 
> > > No amount of entering "correct" usernames and/or passwords provokes
> > > any sort of success. Frustration! 
> > > 
> > > We can use smbclient and access the NT resources in the workgroup. 
> > > 
> > > Our verion is Samba 1.9.18p2. Help!
> > 
> > ok.  what is your o/s and what is your compiler?  if you are using gcc,
> > then try taking out FLAGS1 = -O and either leaving it blank or putting
> > FLAGS1 = -g instead.
> 
> IRIX 6.2 with SGI's 7.2 compilers
> 
> the Makefile ...
> 
> FLAGSM = -DSGI6 -DSHADOW_PWD -DHAVE_TIMEZONE -DFAST_SHARE_MODES
> Libsm = 
> FLAGS1 = -O -n32 -g3

try taking out the -O

> 
> > 
> > particularly if you are compiling for AIX.
> > 
> > if this doesn't work, you'll need to start looking at high debug log
> > levels.  given that this is password problems, you might want to recompile
> > with -DDEBUG_PASSWORD and use debug log level 100 (*lots* of output :-)
> 
> Trying.
> 
> > 
> > luke
> 
> And, do I need to be compiling with -DNTDOMAIN ?

not recommended: the main branch has bugs in -DNTDOMAIN.

luke



More information about the samba mailing list