Samba on two Ethernets

[Sinisha Milivojevich]

Thanks everybody for improving samba.


On one location I have a following setup. Linux machine is Internet
server with masquerading. One Ethernet (eth0) is connected directly to
router, which speaks directly to Internet. The other Ethernet (eth1) is
connected to local network. 

A problem is the following one. Samba servers and clients always look at
the first network, and not to the second one where are 20 Windoze
machines.

I have tried the following:

* I changed eth0 and eth1 to do vice versa
* I have put up in smb.conf a name of the workgroup to be the same as
local domain

Nothing worked.

Can you help ???????????

-- 

Sinisa

_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/ --- ___            \/          - Sinisa Milivojevic, Consultant  _/
_/ -- /     o   __  o __   ___    - CORES , 11000 Beograd       8-) _/
_/ -  ---  /  /  / / /_   /__/   -- Marsala Tolbuhina 31, SERBIA    _/
_/   ___/ /  /  / / __/  /  /  ---- tel:+381 11 4443331,fax: 433001 _/
_/                            ----- http://www.coresinc.com/~sinisa _/
_/  To defy, to conquer. For us! -- mailto:sinisa at coresinc.com  ;o) _/
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vcard.vcf
Type: text/x-vcard
Size: 513 bytes
Desc: Card for Sinisa Milivojevic
Url : http://lists.samba.org/archive/samba/attachments/19971014/c94dd37e/vcard.vcf