please explain this systemd service files question
L.P.H. van Belle
belle at bazuin.nl
Wed Oct 17 15:16:11 UTC 2018
Hai,
With the extra settings its going ok now and i discovered a problem in me. :-(
(sorry guys)
Thanks @you great dev's. Aurelien, Alexander ! BIG thanks!
I learned again today about waf and configuring it.
The mtime check was the key, so buzy trying to find it that i didnt see it and is was just there to see...
I notice that the files in /etc/systemd where from sept 27. and the new in /lib/systemd where from today.
I also found exact what happend.. Sept 27 installed samba, cleaned that server up and created a snapshot of it.
There where 2 files left over... The wrong smbd.service and winbind.service... .. Arg ...
So tomorrow im reverting all my changes, start over again and build again.
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: samba-technical
> [mailto:samba-technical-bounces at lists.samba.org] Namens
> L.P.H. van Belle via samba-technical
> Verzonden: woensdag 17 oktober 2018 14:12
> Aan: samba-technical at lists.samba.org
> Onderwerp: RE: please explain this systemd service files question
>
> Hai Aurélien,
>
> Thank for the reply.
> Now, this makes much more sense to me, and it did really help
> to analize this.
>
> I've added the configure parts and keep them empty as suggested.
>
> Now i've got the following configure settings. ( from debian/rules )
>
> --prefix=/usr \
> --enable-fhs \
> --sysconfdir=/etc \
> --localstatedir=/var \
> --libexecdir=/usr/lib/$(DEB_HOST_MULTIARCH) \
> --with-privatedir=/var/lib/samba/private \
> --with-smbpasswd-file=/etc/samba/smbpasswd \
> --with-piddir=/var/run/samba \
>
> --with-pammodulesdir=/lib/$(DEB_HOST_MULTIARCH)/security \
> --with-pam \
> --with-syslog \
> --with-utmp \
> --with-winbind \
>
> --with-shared-modules=idmap_rid,idmap_ad,idmap_adex,idmap_hash
> ,idmap_ldap,idmap_tdb2,vfs_dfs_samba4,auth_samba4,vfs_nfs4acl_xattr \
> --with-automount \
> --with-ldap \
> --with-ads \
> --with-dnsupdate \
> --with-gpgme \
> --libdir=/usr/lib/$(DEB_HOST_MULTIARCH) \
>
> --with-modulesdir=/usr/lib/$(DEB_HOST_MULTIARCH)/samba \
> --datadir=/usr/share \
> --with-lockdir=/var/run/samba \
> --with-statedir=/var/lib/samba \
> --with-cachedir=/var/cache/samba \
> --enable-avahi \
> --disable-rpath \
> --disable-rpath-install \
>
> --bundled-libraries=NONE,pytevent,iniparser,roken,replace,wind
> ,hx509,asn1,heimbase,hcrypto,krb5,gssapi,heimntlm,hdb,kdc,com_
> err,compile_et,asn1_compile \
> --builtin-libraries=ccan,samba-cluster-support \
> --minimum-library-version="$(shell
> ./debian/autodeps.py --minimum-library-version)" \
> --with-cluster-support \
> --with-socketpath=/var/run/ctdb/ctdbd.socket \
> --with-logdir=/var/log/ctdb \
> --enable-spotlight
>
>
> # small note here. --with-systemddir=/lib/systemd/system i've
> change that to --with-systemddir, intended.
> # Try to make a point here, read on..
> ifeq ($(DEB_HOST_ARCH_OS), linux)
> conf_args += \
> --with-systemd \
> --systemd-install-services \
> --with-systemddir
> --systemd-smb-extra= \
> --systemd-nmb-extra= \
> --systemd-winbind-extra= \
> --systemd-samba-extra= \
> else
> conf_args += \
> --without-systemd
> endif
>
>
> Which results in
> /usr/bin/python2.7 ./buildtools/bin/waf -v configure
> --prefix=/usr --enable-fhs --sysconfdir=/etc
> --localstatedir=/var --libexecdir=/usr/lib/x86_64-linux-gnu
> --with-privatedir=/var/lib/samba/private
> --with-smbpasswd-file=/etc/samba/smbpasswd
> --with-piddir=/var/run/samba
> --with-pammodulesdir=/lib/x86_64-linux-gnu/security
> --with-pam --with-syslog --with-utmp --with-winbind
> --with-shared-modules=idmap_rid,idmap_ad,idmap_adex,idmap_hash
> ,idmap_ldap,idmap_tdb2,vfs_dfs_samba4,auth_samba4,vfs_nfs4acl_
> xattr --with-automount --with-ldap --with-ads
> --with-dnsupdate --with-gpgme
> --libdir=/usr/lib/x86_64-linux-gnu
> --with-modulesdir=/usr/lib/x86_64-linux-gnu/samba
> --datadir=/usr/share --with-lockdir=/var/run/samba
> --with-statedir=/var/lib/samba
> --with-cachedir=/var/cache/samba --enable-avahi
> --disable-rpath --disable-rpath-install
> --bundled-libraries=NONE,pytevent,iniparser,roken,replace,wind
> ,hx509,asn1,heimbase,hcrypto,krb5,gssapi,heimntlm,hdb,kdc,com_err,
> compile_et,asn1_compile
> --builtin-libraries=ccan,samba-cluster-support
> --minimum-library-version="" --with-cluster-support
> --with-socketpath=/var/run/ctdb/ctdbd.socket
> --with-logdir=/var/log/ctdb --enable-spotlight --with-systemd
> --systemd-install-services --with-systemddir
> --systemd-smb-extra= --systemd-nmb-extra=
> --systemd-winbind-extra= --systemd-samba-extra= else --without-systemd
>
>
> These fails with these message..
> --with-systemd --systemd-install-services --with-systemddir
> --systemd-smb-extra= --systemd-nmb-extra=
> --systemd-winbind-extra= --systemd-samba-extra= else --without-systemd
> --with-systemd --systemd-install-services --with-systemddir
> --systemd-smb-extra --systemd-nmb-extra
> --systemd-winbind-extra --systemd-samba-extra else --without-systemd
>
>
> And this errors out on
> --systemd-samba-extra= else --without-systemd
> ^^^^^^
>
> But i also noticed this :
>
> --with-systemddir
>
> waf: error: --with-systemddir option requires an argument
>
>
> -with-systemd --systemd-install-services
> --with-systemddir=/lib/systemd/system Works as it should
> -with-systemd --systemd-install-services --with-systemddir
> Does not work, and the default is not passed. ?? The Default ??
>
> wscript is telling me there is a default...
>
> gr.add_option('--with-systemddir',
> help=("systemd service directory
> [PREFIX/lib/systemd/system]"),
> action="store", dest="SYSTEMDDIR",
> default="${PREFIX}/lib/systemd/system")
>
> So we have a default set but its not passed/used? That not
> good in my opinion.
>
> Im testing more atm.
>
> But how should be pass these new parameters : --systemd-smb-extra
> But bases on above its not really consistant.
>
> Or its me, but then tell me what im doing wrong here.
>
>
> Greetz,
>
> Louis
>
>
>
>
>
>
> > -----Oorspronkelijk bericht-----
> > Van: Aurélien Aptel [mailto:aaptel at samba.org]
> > Verzonden: woensdag 17 oktober 2018 12:17
> > Aan: L.P.H. van Belle; samba-technical at lists.samba.org
> > Onderwerp: RE: please explain this systemd service files question
> >
> > "L.P.H. van Belle via samba-technical"
> > <samba-technical at lists.samba.org>
> > writes:
> > > If i want to disable the extra parts, is it something like
> > this ./configure --systemd-smb-extra=false
> > > Because thats a part i dont get, where do i need to set the
> > "default" from "empty" to no.
> > > I'll to get the patched version now where i removed the
> > systemd_*_extra parts.
> >
> > * waf won't install the systemd files unless you configure with
> > --systemd-install-services. If they end up being installed in your
> > setup it might be done thru some outside script that
> > extracts them from the build and
> > installs them manually.
> > * You can set the systemd install dir with --with-systemddir
> > * All the --systemd-*-extra options are empty by default. If
> > you pass an
> > empty string (e.g. --systemd-smb-extra= ) but it should
> just add an
> > extra empty line.
> >
> > Cheers,
> > --
> > Aurélien Aptel / SUSE Labs Samba Team
> > GPG: 1839 CB5F 9F5B FB9B AA97 8C99 03C8 A49B 521B D5D3
> > SUSE Linux GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany
> > GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB
> > 21284 (AG Nürnberg)
> >
> >
>
>
>
More information about the samba-technical
mailing list