[Announce] Samba 4.6.0 Available for Download
L.P.H. van Belle
belle at bazuin.nl
Tue Mar 7 10:41:40 UTC 2017
Hai,
Can anyone tell me the "adviced" extra package versions for this release.
I did a checkup at :
https://www.samba.org/ftp/?C=M;O=D
And i noticed the following.
Ldb from 1.1.27 to 1.1.28, as mentiond in the changelog
Talloc from 2.1.8 to 2.1.9, not mentioned in the changelog.
Tdb 1.3.11 to 1.3.12, not mentioned in the changelog.
Tevent 0.9.31 stays at 0.9.31 no change.
Anything else i need to know about because it helps me building the debian jessie packages.
I asking because i cant tell if its needed to update talloc and tdb also.
Thanks in advance.
Louis
> -----Oorspronkelijk bericht-----
> Van: samba-technical [mailto:samba-technical-bounces at lists.samba.org]
> Namens Karolin Seeger
> Verzonden: dinsdag 7 maart 2017 10:33
> Aan: samba-announce at lists.samba.org; samba at lists.samba.org; samba-
> technical at lists.samba.org
> Onderwerp: [Announce] Samba 4.6.0 Available for Download
>
> ======================================================
> "Nothing you wear is more important
> than your smile."
>
> Connie Stevens
> ======================================================
>
>
> Release Announcements
> =====================
>
> This is the first stable release of Samba 4.6.
> Please read the release notes carefully before upgrading.
>
>
> UPGRADING
> =========
>
> ID Mapping
> ----------
> We discovered that the majority of users have an invalid or incorrect
> ID mapping configuration. We implemented checks in the 'testparm' tool to
> validate the ID mapping configuration. You should run it and check if it
> prints
> any warnings or errors after upgrading! If it does you should fix them.
> See the
> 'IDENTITY MAPPING CONSIDERATIONS' section in the smb.conf manpage.
> There are some ID mapping backends which are not allowed to be used for
> the
> default backend. Winbind will no longer start if an invalid backend is
> configured as the default backend.
>
> To avoid problems in future we advise all users to run 'testparm' after
> changing the smb.conf file!
>
> vfs_fruit option "fruit:resource" spelling correction
> -----------------------------------------------------
>
> Due to a spelling error in the vfs_fruit option parsing for the
> "fruit:resource"
> option, users who have set this option in their smb.conf were still using
> the
> default setting "fruit:resource = file" as the parser was looking for the
> string
> "fruit:ressource" (two "s").
>
> After upgrading to this Samba version 4.6, you MUST either remove the
> option
> from your smb.conf or set it to the default "fruit:resource = file",
> otherwise
> your macOS clients will not be able to access the resource fork data.
>
> This version Samba 4.6 accepts both the correct and incorrect spelling,
> but the
> next Samba version 4.7 will not accept the wrong spelling.
>
> Users who were using the wrong spelling "ressource" with two "s" can keep
> the
> setting, but are advised to switch to the correct spelling.
>
> vfs_fruit Netatalk metadata xattr name on *BSD
> ----------------------------------------------
>
> Users on *BSD must rename the metadata xattr used by vfs_fruit when
> using the default setting "fruit:metadata = netatalk".
>
> Due to a glitch in the Samba xattr API compatibility layer for FreeBSD and
> a
> mistake in vfs_fruit, vfs_fruit ended up using the wrong xattr name when
> configured with "fruit:metadata = netatalk" (default). Instead of the
> correct
>
> org.netatalk.Metadata
>
> it used
>
> netatalk.Metadata
>
> Starting with Samba 4.6 vfs_fruit will use the correct
> "org.netatalk.Metadata"
> which means existing installations must rename this xattrs. For this
> purpose
> Samba now includes a new tool `mvxattr`. See below for further details.
>
>
> NEW FEATURES/CHANGES
> ====================
>
> Kerberos client encryption types
> --------------------------------
> Some parts of Samba (most notably winbindd) perform Kerberos client
> operations based on a Samba-generated krb5.conf file. A new
> parameter, "kerberos encryption types" allows configuring the
> encryption types set in this file, thereby allowing the user to
> enforce strong or legacy encryption in Kerberos exchanges.
>
> The default value of "all" is compatible with previous behavior, allowing
> all encryption algorithms to be negotiated. Setting the parameter to
> "strong"
> only allows AES-based algorithms to be negotiated. Setting the parameter
> to
> "legacy" allows only RC4-HMAC-MD5 - the legacy algorithm for Active
> Directory.
> This can solves some corner cases of mixed environments with Server 2003R2
> and
> newer DCs.
>
> Printing
> --------
> Support for uploading printer drivers from newer Windows clients (Windows
> 10)
> has been added until our implementation of [MS-PAR] protocol is ready.
> Several issues with uploading different printing drivers have been
> addressed.
>
> The OS Version for the printing server has been increased to announce
> Windows Server 2003 R2 SP2. If a driver needs a newer version then you
> should
> check the smb.conf manpage for details.
>
> New option for owner inheritance
> --------------------------------
> The "inherit owner" smb.conf parameter instructs smbd to set the
> owner of files to be the same as the parent directory's owner.
> Up until now, this parameter could be set to "yes" or "no".
> A new option, "unix only", enables this feature only for the UNIX owner
> of the file, not affecting the SID owner in the Windows NT ACL of the
> file. This can be used to emulate something very similar to folder quotas.
>
> Multi-process Netlogon support
> ------------------------------
>
> The Netlogon server in the Samba AD DC can now run as multiple
> processes. The Netlogon server is a part of the AD DC that handles
> NTLM authentication on behalf of domain members, including file
> servers, NTLM-authenticated web servers and 802.1x gateways. The
> previous restriction to running as a single process has been removed,
> and it will now run in the same process model as the rest of the
> 'samba' binary.
>
> As part of this change, the NETLOGON service will now run on a distinct
> TCP port, rather than being shared with all other RPC services (LSA,
> SAMR, DRSUAPI etc).
>
> New options for controlling TCP ports used for RPC services
> -----------------------------------------------------------
>
> The new 'rpc server port' option controls the default port used for
> RPC services other than Netlogon. The Netlogon server honours instead
> the 'rpc server port:netlogon' option. The default value for both
> these options is the first available port including or after 1024.
>
> AD LDAP and replication performance improvements
> ------------------------------------------------
>
> Samba's LDB (the database holding the AD directory tree, as seen via
> LDAP) and our DRSUAPI replication code continues to improve,
> particularly in respect to the handling of large numbers of objects or
> linked attributes.
>
> * We now respect an 'uptodateness vector' which will dramatically
> reduce the over-replication of links from new DCs.
>
> * We have also made the parsing of on-disk linked attributes much
> more efficient.
>
> * We rely on ldb 1.1.28. This ldb version has improved memory
> handling for ldb search results, improving poorly indexed and
> unindexed search result processing speed by around 20%.
>
> DNS improvements
> ----------------
>
> The samba-tool dns subcommand is now much more robust and can delete
> records in a number of situations where it was not possible to do so
> in the past.
>
> On the server side, DNS names are now more strictly validated.
>
> CTDB changes
> ------------
>
> * "ctdb event" is a new top-level command for interacting with event
> scripts
>
> "ctdb event status" replaces "ctdb scriptstatus" - the latter is
> maintained for backward compatibility but the output format has been
> cleaned up
>
> "ctdb event run" replaces "ctdb eventscript"
>
> "ctdb event script enable" replaces "ctdb enablescript"
>
> "ctdb event script disable" replaces "ctdb disablescript"
>
> The new command "ctdb event script list" lists event scripts.
>
> * CTDB's back-end for running event scripts has been replaced by a
> separate, long-running daemon ctdbd_eventd.
>
> * Running ctdb interactively will log to stderr
>
> * CTDB logs now include process id for each process
>
> * CTDB tags log messages differently. Changes include:
>
> ctdb-recoverd: Messages from CTDB's recovery daemon
> ctdb-recovery: Messages from CTDB database recovery
> ctdb-eventd: Messages from CTDB's event daemon
> ctdb-takeover: Messages from CTDB's public IP takeover subsystem
>
> * The mapping between symbolic and numeric debug levels has changed
>
> Configurations containing numeric debug levels should be updated.
> Symbolic debug levels are recommended. See the DEBUG LEVEL section
> of ctdb(7) for details.
>
> * Tunable IPAllocAlgorithm replaces LCP2PublicIPs, DeterministicIPs
>
> See ctdb-tunables(7) for details.
>
> * CTDB's configuration tunables should be consistently set across a
> cluster
>
> This has always been the cases for most tunables but this fact is
> now documented.
>
> * CTDB ships with recovery lock helper call-outs for etcd and Ceph RADOS
>
> To build/install these, use the "--enable-etcd-reclock" and
> "--enable-ceph-reclock" configure options.
>
> winbind changes
> ---------------
>
> winbind contains code that tries to emulate the group membership
> calculation
> that domain controllers do when a user logs in. This group membership
> calculation
> is a very complex process, in particular for domain trust relationship
> situations. Also, in many scenarios it is impossible for winbind to
> correctly do this calculation due to access restrictions in the
> domains: winbind using its machine account simply does not have the
> rights to ask for an arbitrary user's group memberships.
>
> When a user logs in to a Samba server, the domain controller correctly
> calculates the user's group memberships authoritatively and makes the
> information available to the Samba server. This is the only reliable
> way Samba can get informed about the groups a user is member of.
>
> Because of its flakiness, the fallback group membership code is unwished,
> and our code pathes try hard to only use of the group memberships
> calculated by the domain controller.
>
> However, a lot of admins rely on the fallback behavior in order to support
> access for nfs access, ssh public key authentication and passwordless
> sudo.
>
> That's the reason for changing this back between 4.6.0rc4 and 4.6.0
> (See BUG 12612).
>
> The winbind change to simplify the calculation of supplementary groups to
> make
> it more reliable and predictable has been deferred to 4.7 or later.
>
> This means that 'id <username>' without the user having logged in
> previously works similar to 4.5.
>
> winbind primary group and nss info
> ----------------------------------
>
> With 4.6, it will be possible to optionally use the primary group as
> set in the "Unix Attributes" tab for the local unix token of a domain
> user. Before 4.6, the Windows primary group was always chosen as
> primary group for the local unix token.
>
> To activate the unix primary group, set
>
> idmap config <DOMAIN> : unix_primary_group = yes
>
> Similarly, set
>
> idmap config <DOMAIN> : unix_nss_info = yes
>
> to retrieve the home directory and login shell from the "Unix
> Attributes" of the user. This supersedes the "winbind nss info"
> parameter with a per-domain configuration option.
>
> mvxattr
> -------
>
> mvxattr is a simple utility to recursively rename extended attributes of
> all
> files and directories in a directory tree.
>
> Usage: mvxattr -s STRING -d STRING PATH [PATH ...]
> -s, --from=STRING xattr source name
> -d, --to=STRING xattr destination name
> -l, --follow-symlinks follow symlinks, the default is to ignore
> them
> -p, --print print files where the xattr got renamed
> -v, --verbose print files as they are checked
> -f, --force force overwriting of destination xattr
>
> Help options:
> -?, --help Show this help message
> --usage Display brief usage message
>
> idmap_hash
> ----------
>
> The idmap_hash module is marked as deprecated with this release and will
> be
> removed in a future version. See the manpage of the module for details.
>
>
> smb.conf changes
> ================
>
> Parameter Name Description Default
> -------------- ----------- -------
> kerberos encryption types New all
> inherit owner New option
> fruit:resource Spelling correction
> lsa over netlogon New (deprecated) no
> rpc server port New 0
>
>
> KNOWN ISSUES
> ============
>
> https://wiki.samba.org/index.php/Release_Planning_for_Samba_4.6#Release_bl
> ocking_bugs
>
>
> CHANGES SINCE 4.6.0rc4
> ======================
>
> o Jeremy Allison <jra at samba.org>
> * BUG 12592: Fix several issues found by covscan.
> * BUG 12608: s3: smbd: Restart reading the incoming SMB2 fd when the
> send
> queue is drained.
>
> o Ralph Boehme <slow at samba.org>
> * BUG 12427: vfs_fruit doesn't work with fruit:metadata=stream.
> * BUG 12526: vfs_fruit: Only veto AppleDouble files if "fruit:resource"
> is
> set to "file".
> * BUG 12604: vfs_fruit: Enabling AAPL extensions must be a global
> switch.
>
> o Volker Lendecke <vl at samba.org>
> * BUG 12612: Re-enable token groups fallback.
>
> o Stefan Metzmacher <metze at samba.org>
> * BUG 9048: Samba4 ldap error codes.
> * BUG 12557: gensec:spnego: Add debug message for the failed principal.
> * BUG 12605: s3:winbindd: Fix endless forest trust scan.
> * BUG 12612: winbindd: Find the domain based on the sid within
> wb_lookupusergroups_send().
>
> o Andreas Schneider <asn at samba.org>
> * BUG 12557: s3:librpc: Handle gss_min in gse_get_client_auth_token()
> correctly.
> * BUG 12582: idmap_hash: Add a deprecation message, improve the
> idmap_hash
> manpage.
> * BUG 12592: Fix several issues found by covscan.
>
> o Martin Schwenke <martin at meltin.net>
> * BUG 12592: ctdb-logging: CID 1396883 Dereference null return value
> (NULL_RETURNS).
>
>
> CHANGES SINCE 4.6.0rc3
> ======================
>
> o Jeremy Allison <jra at samba.org>
> * BUG 12545: s3: rpc_server/mdssvc: Add attribute "kMDItemContentType".
> * BUG 12572: s3: smbd: Don't loop infinitely on bad-symlink resolution.
>
> o Ralph Boehme <slow at samba.org>
> * BUG 12490: vfs_fruit: Correct Netatalk metadata xattr on FreeBSD.
> * BUG 12536: s3/smbd: Check for invalid access_mask
> smbd_calculate_access_mask().
> * BUG 12591: vfs_streams_xattr: use fsp, not base_fsp.
>
> o Amitay Isaacs <amitay at gmail.com>
> * BUG 12580: ctdb-common: Fix use-after-free error in
> comm_fd_handler().
> * BUG 12595: build: Fix generation of CTDB manpages while creating
> tarball.
>
> o Bryan Mason <bmason at redhat.com>
> * BUG 12575: Modify smbspool_krb5_wrapper to just fall through to
> smbspool if
> AUTH_INFO_REQUIRED is not set or is not "negotiate".
>
> o Stefan Metzmacher <metze at samba.org>
> * BUG 11830: s3:winbindd: Try a NETLOGON connection with noauth over
> NCACN_NP
> against trusted domains.
> * BUG 12262: 'net ads testjoin' and smb access fails after winbindd
> changed the
> trust password.
> * BUG 12585: librpc/rpc: fix regression in
> NT_STATUS_RPC_ENUM_VALUE_OUT_OF_RANGE error mapping.
> * BUG 12586: netlogon_creds_cli_LogonSamLogon doesn't work without
> netr_LogonSamLogonEx.
> * BUG 12587: winbindd child segfaults on connect to an NT4 domain.
> * BUG 12588: s3:winbindd: Make sure cm_prepare_connection() only
> returns OK
> with a valid tree connect.
> * BUG 12598: winbindd (as member) requires kerberos against trusted ad
> domain,
> while it shouldn't.
> * BUG 12601: Backport pytalloc_GenericObject_reference() related
> changes to
> 4.6.
>
> o Garming Sam <garming at catalyst.net.nz>
> * BUG 12600: dbchecker: Stop ignoring linked cases where both objects
> are
> alive.
>
> o Andreas Schneider <asn at samba.org>
> * BUG 12571: s3-vfs: Only walk the directory once in
> open_and_sort_dir().
>
> o Martin Schwenke <martin at meltin.net>
> * BUG 12589: CTDB statd-callout does not cause grace period when
> CTDB_NFS_CALLOUT="".
> * BUG 12595: ctdb-build: Fix RPM build.
>
>
> CHANGES SINCE 4.6.0rc2
> ======================
>
> o Jeremy Allison <jra at samba.org>
> * BUG 12499: s3: vfs: dirsort doesn't handle opendir of "." correctly.
> * BUG 12546: s3: VFS: vfs_streams_xattr.c: Make streams_xattr_open()
> store
> the same path as streams_xattr_recheck().
> * BUG 12531: Make vfs_shadow_copy2 cope with server changing
> directories.
>
> o Andrew Bartlett <abartlet at samba.org>
> * BUG 12543: samba-tool: Correct handling of default value for
> use_ntvfs and
> use_xattrs.
> * BUG 12573: Samba < 4.7 does not know about compatibleFeatures and
> requiredFeatures.
> * BUG 12577: 'samba-tool dbcheck' gives errors on one-way links after a
> rename.
>
> o Ralph Boehme <slow at samba.org>
> * BUG 12184: s3/rpc_server: Shared rpc modules loading.
> * BUG 12520: Ensure global "smb encrypt = off" is effective.
> * BUG 12524: s3/rpc_server: Move rpc_modules.c to its own subsystem.
> * BUG 12541: vfs_fruit: checks wrong AAPL config state and so always
> uses
> readdirattr.
>
> o Volker Lendecke <vl at samba.org>
> * BUG 12551: smbd: Fix "map acl inherit" = yes.
>
> o Stefan Metzmacher <metze at samba.org>
> * BUG 12398: Replication with DRSUAPI_DRS_CRITICAL_ONLY and
> DRSUAPI_DRS_GET_ANC results in WERR_DS_DRA_MISSING_PARENT S
> * BUG 12540: s3:smbd: allow "server min protocol = SMB3_00" to go via
> "SMB
> 2.???" negprot.
>
> o John Mulligan <jmulligan at nasuni.com>
> * BUG 12542: docs: Improve description of "unix_primary_group"
> parameter in
> idmap_ad manpage.
>
> o Andreas Schneider <asn at samba.org>
> * BUG 12552: waf: Do not install the unit test binary for krb5samba.
>
> o Amitay Isaacs <amitay at gmail.com>
> * BUG 12547: ctdb-build: Install CTDB tests correctly from toplevel.
> * BUG 12549: ctdb-common: ioctl(.. FIONREAD ..) returns an int value.
>
> o Garming Sam <garming at catalyst.net.nz>
> * BUG 12577: 'samba-tool dbcheck' gives errors on one-way links after a
> rename.
>
> o Uri Simchoni <uri at samba.org>
> * BUG 12529: waf: Backport finding of pkg-config.
>
>
> CHANGES SINCE 4.6.0rc1
> ======================
>
> o Amitay Isaacs <amitay at gmail.com>
> * BUG 12469: CTDB lock helper getting stuck trying to lock a record.
> * BUG 12500: ctdb-common: Fix a bug in packet reading code for generic
> socket
> I/O.
> * BUG 12510: sock_daemon_test 4 crashes with SEGV.
> * BUG 12513: ctdb-daemon: Remove stale eventd socket.
>
> o Björn Jacke <bj at sernet.de>
> * BUG 12535: vfs_default: Unlock the right file in copy chunk.
>
> o Volker Lendecke <vl at samba.org>
> * BUG 12509: messaging: Fix dead but not cleaned-up-yet destination
> sockets.
> * BUG 12538: Backport winbind fixes.
>
> o Stefan Metzmacher <metze at samba.org>
> * BUG 12501: s3:winbindd: talloc_steal the extra_data in
> winbindd_list_users_recv().
>
> o Martin Schwenke <martin at meltin.net>
> * BUG 12511: ctdb-takeover: Handle case where there are no RELEASE_IPs
> to
> send.
> * BUG 12512: ctdb-scripts: Fix remaining uses of "ctdb gratiousarp".
> * BUG 12516: ctdb-scripts: /etc/iproute2/rt_tables gets populated with
> multiple
> 'default' entries.
>
>
> #######################################
> Reporting bugs & Development Discussion
> #######################################
>
> Please discuss this release on the samba-technical mailing list or by
> joining the #samba-technical IRC channel on irc.freenode.net.
>
> If you do report problems then please try to send high quality
> feedback. If you don't provide vital information to help us track down
> the problem then you will probably be ignored. All bug reports should
> be filed under the Samba 4.1 and newer product in the project's Bugzilla
> database (https://bugzilla.samba.org/).
>
>
> ======================================================================
> == Our Code, Our Bugs, Our Responsibility.
> == The Samba Team
> ======================================================================
>
> ================
> Download Details
> ================
>
> The uncompressed tarballs and patch files have been signed
> using GnuPG (ID 6F33915B6568B7EA). The source code can be downloaded
> from:
>
> https://download.samba.org/pub/samba/stable/
>
> The release notes are available online at:
>
> https://www.samba.org/samba/history/samba-4.6.0.html
>
> Our Code, Our Bugs, Our Responsibility.
> (https://bugzilla.samba.org/)
>
> --Enjoy
> The Samba Team
More information about the samba-technical
mailing list