[Patch v3 02/19] CIFS: SMBD: Add SMBDirect protocol and transport constants

[Pavel Shilovsky]

2017-08-29 12:28 GMT-07:00 Long Li <longli at exchange.microsoft.com>:
> From: Long Li <longli at microsoft.com>
>
> To prepare for protocol implementation, add constants and user-configurable
> values in the SMBDirect protocol.
>
> Signed-off-by: Long Li <longli at microsoft.com>
> ---
>  fs/cifs/smbdirect.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  fs/cifs/smbdirect.h | 20 ++++++++++++++
>  2 files changed, 98 insertions(+)
>  create mode 100644 fs/cifs/smbdirect.c
>  create mode 100644 fs/cifs/smbdirect.h
>
> diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c
> new file mode 100644
> index 0000000..d785bc1
> --- /dev/null
> +++ b/fs/cifs/smbdirect.c
> @@ -0,0 +1,78 @@
> +/*
> + *   Copyright (C) 2017, Microsoft Corporation.
> + *
> + *   Author(s): Long Li <longli at microsoft.com>
> + *
> + *   This program is free software;  you can redistribute it and/or modify
> + *   it under the terms of the GNU General Public License as published by
> + *   the Free Software Foundation; either version 2 of the License, or
> + *   (at your option) any later version.
> + *
> + *   This program is distributed in the hope that it will be useful,
> + *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
> + *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
> + *   the GNU General Public License for more details.
> + */
> +#include <linux/module.h>
> +#include "smbdirect.h"
> +#include "cifs_debug.h"
> +
> +/* SMBD version number */
> +#define SMBD_V1        0x0100
> +
> +/* Port numbers for SMBD transport */
> +#define SMB_PORT       445
> +#define SMBD_PORT      5445
> +
> +/* Address lookup and resolve timeout in ms */
> +#define RDMA_RESOLVE_TIMEOUT   5000
> +
> +/* SMBD negotiation timeout in seconds */
> +#define SMBD_NEGOTIATE_TIMEOUT 120
> +
> +/* SMBD minimum receive size and fragmented sized defined in [MS-SMBD] */
> +#define SMBD_MIN_RECEIVE_SIZE          128
> +#define SMBD_MIN_FRAGMENTED_SIZE       131072
> +
> +/*
> + * Default maximum number of RDMA read/write outstanding on this connection
> + * This value is possibly decreased during QP creation on hardware limit
> + */
> +#define SMBD_CM_RESPONDER_RESOURCES    32
> +
> +/* Maximum number of retries on data transfer operations */
> +#define SMBD_CM_RETRY                  6
> +/* No need to retry on Receiver Not Ready since SMBD manages credits */
> +#define SMBD_CM_RNR_RETRY              0
> +
> +/*
> + * User configurable initial values per SMBD transport connection
> + * as defined in [MS-SMBD] 3.1.1.1
> + * Those may change after a SMBD negotiation
> + */

Since these value are per transport connection, why they are global?
Shouldn't they be inside a some structure that is created for a
particular connection? Also the constants below should be defines.

> +/* The local peer's maximum number of credits to grant to the peer */
> +static int receive_credit_max = 255;
> +/* The remote peer's credit request of local peer */
> +static int send_credit_target = 255;
> +/* The maximum single message size can be sent to remote peer */
> +static int max_send_size = 1364;
> +/*  The maximum fragmented upper-layer payload receive size supported */
> +static int max_fragmented_recv_size = 1024 * 1024;
> +/*  The maximum single-message size which can be received */
> +static int max_receive_size = 8192;
> +
> +/* The timeout to initiate send of a keepalive message on idle */
> +static int keep_alive_interval = 120;
> +
> +/*
> + * User configurable initial values for RDMA transport
> + * The actual values used may be lower and are limited to hardware capabilities
> + */
> +/* Default maximum number of SGEs in a RDMA send/recv */
> +static int max_send_sge = SMBDIRECT_MAX_SGE;
> +static int max_recv_sge = SMBDIRECT_MAX_SGE;
> +/* Default maximum number of SGEs in a RDMA write/read */
> +static int max_frmr_depth = 2048;
> +
> +/* If payload is less than this byte, use RDMA send/recv not read/write */
> +static int rdma_readwrite_threshold = 4096;
> diff --git a/fs/cifs/smbdirect.h b/fs/cifs/smbdirect.h
> new file mode 100644
> index 0000000..06eeb0b
> --- /dev/null
> +++ b/fs/cifs/smbdirect.h
> @@ -0,0 +1,20 @@
> +/*
> + *   Copyright (C) 2017, Microsoft Corporation.
> + *
> + *   Author(s): Long Li <longli at microsoft.com>
> + *
> + *   This program is free software;  you can redistribute it and/or modify
> + *   it under the terms of the GNU General Public License as published by
> + *   the Free Software Foundation; either version 2 of the License, or
> + *   (at your option) any later version.
> + *
> + *   This program is distributed in the hope that it will be useful,
> + *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
> + *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
> + *   the GNU General Public License for more details.
> + */
> +#ifndef _SMBDIRECT_H
> +#define _SMBDIRECT_H
> +
> +#define SMBDIRECT_MAX_SGE      16
> +#endif
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-cifs" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



--
Best regards,
Pavel Shilovsky