Fwd: Fwd: Setting FS Quota against SAMBA share from windows2k12

Partha Sarathi parthasarathi.bl at gmail.com
Thu Mar 31 18:43:45 UTC 2016


Resending it as there were mail bounces for the previous mail.


Thanks Jeremy for the comment on unwanted code. Please find the updated
patch.

Regards,
--Partha

On Tue, Mar 29, 2016 at 4:03 PM, Jeremy Allison <jra at samba.org> wrote:

> On Tue, Mar 29, 2016 at 02:33:48PM -0700, Partha Sarathi wrote:
> > Thanks Jeremy.
> >
> > Please find the updated patch for review.
>
> More changes (sorry). This code:
>
> +        if (INFO_LEVEL_IS_UNIX(info_level) && !lp_unix_extensions()) {
> +                return NT_STATUS_INVALID_LEVEL;
> +        }
> +
> +        if (!CAN_WRITE(conn)) {
> +                /* Allow POSIX opens. The open path will deny
> +                 * any non-readonly opens. */
> +                if (info_level != SMB_POSIX_PATH_OPEN) {
> +                        return NT_STATUS_DOS(ERRSRV, ERRaccess);
> +                }
> +        }
>
> isn't needed. It's boilerplate from smbd_do_setfilepathinfo()
> and really doesn't apply here.
>
> > On Tue, Mar 29, 2016 at 9:44 AM, Jeremy Allison <jra at samba.org> wrote:
> >
> > > On Mon, Mar 28, 2016 at 10:23:38PM -0700, Partha Sarathi wrote:
> > > > Hi Folks,
> > > >
> > > > Attached the patch which fixes the SMB2_SETINFO to handle
> > > > the SMB2_INFO_FILESYSTEM  info type and SMB_FS_QUOTA_INFORMATION info
> > > level.
> > > >
> > > > Please let me now your feedback on the patch.
> > > >
> > > > Regards,
> > > > --Partha
> > >
> > > Hi Partha,
> > >
> > > Thanks so much for the patch !
> > >
> > > Quick look over, one change I'd like is to change
> > > the parameters to smbd_do_setfsinfo() from int to
> > > size_t for:
> > >
> > > +                int data_size;
> > > +                int ret_size = 0;
> > >
> > > I know the previous versions of these functions
> > > took 'int' but these things really are unsigned,
> > > so I'd like to tighten this up for future code.
> > >
> > > Cheers,
> > >
> > >         Jeremy.
> > >
> > > > ---------- Forwarded message ----------
> > > > From: Partha Sarathi <partha at exablox.com>
> > > > Date: Fri, Mar 25, 2016 at 12:00 PM
> > > > Subject: Setting FS Quota against SAMBA share from windows2k12
> > > > To: samba at lists.samba.org, samba-technical <
> > > samba-technical at lists.samba.org>
> > > >
> > > >
> > > > Hi Folks,
> > > >
> > > > I tried to set quota(soft limit and hard limit) on a share from
> > > > Windows2k12R2 and I  noticed "NT_STATUS_INVALID_PARAMETER" error for
> the
> > > > SMB2 setinfo request. Attached the packet capture for your reference.
> > > >
> > > > SAMBA version 4.3.4
> > > >
> > > > The below is the corresponding debug log
> > > >
> > > > [2016/03/25 10:38:21.333815, 10, pid=17987, effective(0, 110000513),
> > > > real(0, 0)]
> ../source3/smbd/smb2_setinfo.c:379(smbd_smb2_setinfo_send)
> > > >   smbd_smb2_setinfo_send: $Extend/$Quota:$Q:$INDEX_ALLOCATION - fnum
> > > > 2762575723
> > > > [2016/03/25 10:38:21.333824, 10, pid=17987, effective(0, 110000513),
> > > > real(0, 0)]
> > > ../source3/smbd/smb2_server.c:2789(smbd_smb2_request_error_ex)
> > > >   smbd_smb2_request_error_ex: idx[1]
> status[NT_STATUS_INVALID_PARAMETER]
> > > ||
> > > > at ../source3/smbd/smb2_setinfo.c:132
> > > > [2016/03/25 10:38:21.333831, 10, pid=17987, effective(0, 110000513),
> > > > real(0, 0)]
> ../source3/smbd/smb2_server.c:2680(smbd_smb2_request_done_ex)
> > > >   smbd_smb2_request_done_ex: idx[1]
> status[NT_STATUS_INVALID_PARAMETER]
> > > > body[8] dyn[yes:1] at ../source3/smbd/smb2_server.c:2837
> > > >
> > > >
> > > > When I looked at the code the
> > > >
> > > > The* smbd_smb2_setinfo_send()* is handling only the below two info
> types
> > > > and its not handling *SMB2_0_INFO_FILESYSTEM*.
> > > >
> > > >         case 0x01:/* SMB2_SETINFO_FILE */
> > > >
> > > > case 0x03:/* SMB2_SETINFO_SECURITY */
> > > >
> > > >
> > > > From the MS-SMB2 spec it looks like there is a specific info type for
> > > > handling the FILESYSTEM requests as below and in samba this info
> type is
> > > > not considered . Is it a known issue or  I am missing anything ?
> > > >
> > > > *3.3.5.21.2 Handling SMB2_0_INFO_FILESYSTEM *
> > > >
> > > > The information classes that are supported for setting underlying
> object
> > > > store information are listed in section 2.2.39. Documentation for
> these
> > > is
> > > > provided [MS-FSCC] section 2.5. Requests for information classes not
> > > listed
> > > > in section 2.2.39 but documented in section 2.5 of [MS-FSCC] for
> Uses of
> > > > "Set" or "LOCAL" MUST be failed with STATUS_NOT_SUPPORTED. Requests
> for
> > > > information classes not documented in section 2.5 of [MS-FSCC] or
> > > > documented in section 2.5 of [MS-FSCC] for Uses of only "Query" MUST
> be
> > > > failed with STATUS_INVALID_INFO_CLASS.
> > > >
> > > > If the object store supports security and the information class is
> > > > FileFsControlInformation or FileFsObjectIdInformation and
> > > Open.GrantedAccess
> > > > does not include FILE_WRITE_DATA, the server MUST fail the request
> with
> > > > STATUS_ACCESS_DENIED.
> > > >
> > > > The server MUST apply the information requested to the underlying
> object
> > > > store.<359> If the underlying object store returns an error, the
> server
> > > > MUST fail the request with the error code received. Otherwise, the
> server
> > > > MUST initialize an SMB2 SET_INFO Response following the syntax given
> in
> > > > section 2.2.40. The response MUST then be sent to the client.
> > > >
> > > > --Partha
> > >
> > >
> > >
> > >
> >
> >
> > --
> > Thanks & Regards
> > -Partha
>
>
>


-- 
Thanks & Regards
-Partha



-- 
Thanks & Regards
-Partha
-------------- next part --------------
A non-text attachment was scrubbed...
Name: quota_setinfo_3.patch
Type: application/octet-stream
Size: 4810 bytes
Desc: not available
URL: <http://lists.samba.org/pipermail/samba-technical/attachments/20160331/5c184812/quota_setinfo_3.obj>


More information about the samba-technical mailing list