CTDB failover with multiple VLAN tagged bonded interfaces don't work

[Michael Adam]

Hi Robin,

could you provide the output of "ctdb ip" and "ctdb ifaces"?
Also, raising the debug level to INFO, might give a clue
in the logs when starting CTDB.

Cheers - Michael

On 2014-03-25 at 19:00 +0000, Robin Jonsson wrote:
> 
> Hi, 
> 
> I have configured failover for my Gluster volumes using CTDB, which works just fine when I specify one or more IP address on the same VLAN tagged bonded interface like this: 
> 
> # cat /etc/ctdb/public_addresses
> 192.168.4.4/26 bond0.123
> 192.168.4.5/26 bond0.123
> 
> When I specify addresses from different VLANs (and subnets) like this, it doesn’t work:
> 192.168.4.4/26 bond0.123
> 192.168.4.72/26 bond0.124
> 
> … and I get ‘PARTIALLYONLINE’ when running ‘ctdb status’. The first specified interface goes online, the other one doesn’t.
> 
> # ctdb status
> Number of nodes:2
> pnn:0 192.168.4.2      PARTIALLYONLINE (THIS NODE)
> pnn:1 192.168.4.3      PARTIALLYONLINE
> Generation:624797803
> Size:2
> hash:0 lmaster:0
> hash:1 lmaster:1
> Recovery mode:NORMAL (0)
> Recovery master:0
> 
> I have checked the logs, but I am unable to find anything that I’ve done obviously wrong.. 
> 
> Anyone got an idea?
> 
> Thanks in advance, 
> Robin


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 215 bytes
Desc: Digital signature
URL: <http://lists.samba.org/pipermail/samba-technical/attachments/20140326/52a07b3b/attachment.pgp>