Quest of SUSE 10 with Server2k8 AD authentication

Franz Pförtsch franz.pfoertsch at googlemail.com
Tue Feb 4 02:07:01 MST 2014


Hi Danie,

do not spend any time in Samba 3.0.x, it will not work in cause of the
sealed connections between the Samba-Server and the AD.

Upgrade to something newer.
there is a special repo for sles 10 sp1 with samba 3.4.3 called
SLES10-GPLv3-Extras.

regards
Franz


On Mon, Feb 3, 2014 at 2:40 PM, Danie Wessels <Danie.Wessels at pbmr.co.za>wrote:

> Hi
>
> I am trying to revive AD user authentication from a 2008 server {PDC} for
> 2 Suse VMs and after a couple of days (and a lot of learning :^) ) are
> still running into problems on sambaclient 3 (Version
> 3.0.24-2.23-1296-SUSE-CODE10). Could you please help me find the problem in
> the config / set up. Due to policy (not AD but the official kind) I cannot
> / may not readily change or upgrade software and thus need to get this
> going again. Before I started on this some PDC had changed roles and where
> removed.
>
> Status:
> ======
> wbinfo -u and -i and -n and -g and kinit and klist seem to work ok
>
> But on machine 1:
> ---
> smbclient -L {PDC} -U {someAdminUser}
> {UnSuccessfully reports after SYSVOL}
> Error connecting to {PDC SERVER IP} (Connection refused)
> Connection to {PDC} failed
> NetBIOS over TCP disabled -- no workgroup available
>
> But in /etc/samba/smb.conf (also for machine 2)
> disable netbios = no
>
> wbinfo --get-auth-user
> {DOMAIN}/{someAdminUser}%{password}
>
> {someAdminUser} was also added as a local user on machine 1
>
> where as on machine 2:
> --------
> smbclient -L {PDC} -U {someAdminUser}
> {Successfully reports all}
> wbinfo --get-auth-user
> No authorised user configured
>
> Problem:
> --------
> AD users and groups are not updated locally nor authenticated on AD
> i.e. cannot login.
>
> Main problem seem to be wbinfo logon Errors on both.
> NT code 0xc0000388 (0xc0000388)
> NT_STATUS_LOGON_FAILURE (0xc000006d)
>
>
>
> Regards
> Danie W
>
> The perusal, use, dissemination, copying or storing of this message or its
> attachments and the opening of attachments is subject to PBMR's standard
> email disclaimer available at internet address:
> http://www.pbmr.com/index.asp?Content=233 - Disclaimer or on request from
> the sender.
>


More information about the samba-technical mailing list