[PATCH] Switch to internal dns server as default for provision

[Ricky Nance]

My mind is shot, I should have mentioned when using grep with those
commands you don't see the prompt "Press enter to see a dump of your
service definitions" so you will need to hit enter two times to get output.
Also, I am in no way responsible for the things you change in your config,
so if you end up with a totally broken system, don't email me! :)

Ricky


On Thu, Sep 6, 2012 at 2:19 PM, Ricky Nance <ricky.nance at weaubleau.k12.mo.us
> wrote:

> Steve, I would assume the following options would work for you, btw the
> following commands are really useful:
>
> root at ws-server:/usr/local/samba/var# samba-tool testparm -v | grep dns
>
>         dns proxy = Yes
>         allow dns updates = False
>         dns forwarder =
>         dns recursive queries = No
>         dns update command = /usr/local/samba/sbin/samba_dnsupdate
>         multicast dns register = No
>         server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl,
> winbind, ntp_signd, kcc, dnsupdate
>         dcerpc endpoint servers = epmapper, wkssvc, rpcecho, samr,
> netlogon, lsarpc, spoolss, drsuapi, dssetup, unixinfo, browser, eventlog6,
> backupkey, dnsserver
>
> that being said, if you are using s3fs, you also need to look at `testparm
> -v | grep mysearch`. Personally with things changing daily I use those
> commands often.
>
> Good luck,
> Ricky
>
>
> On Thu, Sep 6, 2012 at 1:35 PM, steve <steve at steve-ss.com> wrote:
>
>> On 09/06/2012 08:22 PM, Ricky Nance wrote:
>>
>>> Steve,
>>>
>>> This was straight from Kai on irc: 'Simply power down bind, add "server
>>> services = +dns" to your smb.conf'.
>>>
>>>
>> Thanks Ricky. I'm just about to give it a go. It would also good to have
>> some doco on how to setup forwarders. Or just a bit of anything that end
>> users could have a go at.
>> Cheers,
>> Steve
>>
>
>
>
> --
>
>
>


--