FW: Help for 2008 server

[Volker Lendecke]

On Mon, Jun 30, 2008 at 11:01:08AM +0530, ahmed.feroz at wipro.com wrote:
> Currently I'm using samba 3.0.14a and  would like to provide windows
> server 2008 support.
> I have done few changes, with those changes my 3.0.14a joined to windows
> server 2008 Active Directory.
> And I'm able to access samba share folder with NetBIOS name only.
> 
> When I try to access samba share folder I'm getting error "Specified
> network name is no longer available".
> 
> I have attached the network trace, smb.conf file and my patch file.
> 
> I have added 128bit crypto too in my changes but still I'm not able to
> access samba file share with IP address.
> 
> Can some one help me in fixing this issue?

You will probably only get help here if you use a recent
version of Samba. Tomorrow 3.2.0 will be released, or you
could use the v3-0-test branch that will be released as
3.0.31.

So once 3.2.0 works for you your best chance would be to do
comparative sniffs of working and non-working versions and
figure out the code pieces that make 3.0.14a break by
comparing the first packet that significantly differs.

Volker
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.samba.org/archive/samba-technical/attachments/20080630/d4daaf30/attachment.bin