Samba 3.2.0

[Michael Adam]

Update from Ralf Weinert:

The Makefile.in from v3-2-test I attached works fine.
So this issue will be fixed in 3.2.1.

Michael

Michael Adam wrote:
> Moin,
> 
> trying again to get this back on-list... :-)
> 
> Weinert, Ralf wrote:
> > The patch doesn't work:
> > 
> > The answer of the patch command is: 
> > Hm... I can't seem to find a patch in there anywhere.
> 
> Oh alright, your patch does not recognize the unified diff format...
> I'll attach the current Makefile.in.
> 
> > By the way I have another problem with that new version (3.2.0) on a Solaris (8.0) Server.
> > I want use the old smb.conf from the last samba version (3.0.30). But as soon as I try to connect
> > to a share there is only a message logged: 
> > 
> > Libsmb/smb_signing.c:srv_check_incoming_message(754)
> >  srv_check_incoming_message: BAD SIG: seq 2 got SMB signature of
> >
> > What does that mean?  
> 
> Something with signing went wrong.
> I suggest you create a new thread, preferably in the samba mailing list. 
> To tell what is going wrong, one needs your smb.conf file, the
> precise commands issued, a level 10 log of the server and if
> possible of the client (e.g. if it is smbclient).
> 
> Cheers - Michael
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Michael Adam [mailto:ma at sernet.de] 
> > Gesendet: Montag, 14. Juli 2008 22:47
> > An: Weinert, Ralf
> > Cc: samba-technical at lists.samba.org
> > Betreff: Re: Samba 3.2.0
> > 
> > Hi Ralf,
> > 
> > replying with the list in Cc again.
> > 
> > I think have fixed this in v3-2-test (so it will be in 3.2.1).
> > Could you please verify by applying the attached patch to the
> > source tree and rebuilding like so:
> > 
> > $ cd /path/to/samba-3.2.0/source
> > $ patch -p2 < v3-2-test.Makefile.in.combined.diff
> > $ ./config.status
> > $ make
> > 
> > (The patch includes all changes to Makefile.in since 3.2.0. So there are
> > a few more changes.)
> > 
> > Thanks for your feedback.
> > 
> > Cheers - Michael
> > 
> > Weinert, Ralf wrote:
> > > Hi Michael,
> > > 
> > > After building the binaries I removed everything. So I unzipped the tar file and ran the configure command again.
> > > I hope I get the same results. At the end of this e-Mail I put the Makefile (renamed as Makefile.org) the Makefile with my corrections
> > > and the configure.log file.
> > > I hope this will help.
> > > 
> > > The configure command I ran with --prefix=/usr/local/samba-3.2.0 --with-aio-support --with-ldap=no --with-swat=no
> > > 
> > > What I did is: 
> > > I removed the backslash in the line for linking bin/smbd that is followed by linking bin/nmbd.
> > > The next backslashes I removed were in the lines for linking bin/wbinfo bin/smbclient bin/smbtree bin/passwd and so on.
> > > It's nearly everywhere as you already said, where an empty line follows the $(CC) Command. These lines all end with an
> > > unnecessary backslash.  
> > >    
> > > 
> > > Cheers - Ralf
> > > 
> > > Siemens AG
> > > Industry Sector
> > > I MO RA PC ED19
> > > Ackerstr. 22
> > > 38126 Braunschweig
> > > Tel.: +49 (531) 226-3335 
> > > Fax: +49 (531) 226-4438 
> > > mailto:ralf.weinert at siemens.com
> > > 
> > > 
> > > Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme; Vorstand: Peter Löscher, Vorsitzender; Wolfgang Dehen, Heinrich Hiesinger, Joe Kaeser, Jim Reid-Anderson, Hermann Requardt, Siegfried Russwurm, Peter Y. Solmssen; Sitz der Gesellschaft: Berlin und München; Registergericht: Berlin Charlottenburg, HRB 12300, München, HRB 6684; WEEE-Reg.-Nr. DE 23691322
> > > 
> > > 
> > > -----Ursprüngliche Nachricht-----
> > > Von: Michael Adam [mailto:ma at sernet.de] 
> > > Gesendet: Montag, 14. Juli 2008 11:39
> > > An: Weinert, Ralf
> > > Cc: samba-technical at lists.samba.org
> > > Betreff: Re: Samba 3.2.0
> > > 
> > > Hi Ralf,
> > > 
> > > I'd like to keep this on-list, if you don't mind.
> > > It might be useful for others.
> > > 
> > > Weinert, Ralf wrote:
> > > > Compiling succeeded now. But there had been some more troubles. In the Makefile
> > > > there are too many BackSlashes that should prevent the Carriage Return from
> > > > doing its job.  
> > > > But there is none. Removing these BackSlashes make succeeds.
> > > 
> > > Hmm, sorry, but I don't get you completely:
> > > Do you mean that in the Makefile, there had been more empty lines
> > > following backslashes? (I.e. lines where in the Makefile.in there
> > > is just one @VARIABLE@ which is unset by configure.)
> > > 
> > > Could you provide your config.log (or at lease the config
> > > options), the Makefile produced by configure,
> > > and the diff that made the build working for you, so that
> > > I can get it fixed upstream.
> > > 
> > > Thanks - Michael
> > > 
> > > > -----Ursprüngliche Nachricht-----
> > > > Von: Michael Adam [mailto:ma at sernet.de] 
> > > > Gesendet: Freitag, 11. Juli 2008 13:42
> > > > An: Weinert, Ralf
> > > > Cc: samba-technical at samba.org
> > > > Betreff: Re: Samba 3.2.0
> > > > 
> > > > now I try to really attach the patch... :-o
> > > > 
> > > > Michael Adam wrote:
> > > > > Hi,
> > > > > 
> > > > > this *looks* (even thoug I cannot reproduce it) as if 
> > > > > the smbd target rules are combined with the nmbd target,
> > > > > probably due to your @WINBIND_LIBS@ being empty (you
> > > > > are not building the libwbclient shared lib apparently).
> > > > > 
> > > > > Please test if concatenating the last two lines of the smbd
> > > > > target in Makefile.in helps (see attached patch).
> > > > > running ./config.status and then make should be enough to test.
> > > > > 
> > > > > If that does not help, we need more info.
> > > > > 
> > > > > Cheers - Michael
> > > > > 
> > > > > Weinert, Ralf wrote:
> > > > > > Hi everybody,
> > > > > >  
> > > > > > compiling your new Samba version (3.2.0) ends with an error.
> > > > > > there is a file at the end of the e-mail that contains all outputs of the configue and make command.
> > > > > >  
> > > > > > The maschine, on which I tried to compile, is a  HP-UX 9000/785/C3600 running with the system software HP-UX B.11.11
> > > > > >  
> > > > > > Maybe you find out what going wrong. Thanks for your help
> > > > > >  
> > > > > > Best regards
> > > > > > 
> > > > > > Ralf Weinert 
> > > > > > 
> > > > > > Siemens AG 
> > > > > > Industry Sector 
> > > > > > I MO RA PC ED19 
> > > > > > Ackerstr. 22 
> > > > > > 38126 Braunschweig 
> > > > > > Tel.: +49 (531) 226-3335 
> > > > > > Fax: +49 (531) 226-4438 
> > > > > > mailto:ralf.weinert at siemens.com 
> > > > > > 
> > > > > > Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme; Vorstand: Peter Löscher, Vorsitzender; Wolfgang Dehen, Heinrich Hiesinger, Joe Kaeser, Jim Reid-Anderson, Hermann Requardt, Siegfried Russwurm, Peter Y. Solmssen; Sitz der Gesellschaft: Berlin und München; Registergericht: Berlin Charlottenburg, HRB 12300, München, HRB 6684; WEEE-Reg.-Nr. DE 23691322 
> 
> -- 
> Michael Adam <ma at sernet.de>  <obnox at samba.org>
> SerNet GmbH, Bahnhofsallee 1b, 37081 Göttingen
> phone: +49-551-370000-0, fax: +49-551-370000-9
> AG Göttingen, HRB 2816, GF: Dr. Johannes Loxen
> http://www.SerNet.DE, mailto: Info @ SerNet.DE

> #########################################################################
> # Makefile.in for Samba - rewritten for autoconf support
> # Copyright Andrew Tridgell 1992-1998
> # Copyright (C) 2001 by Martin Pool <mbp at samba.org>
> # Copyright Andrew Bartlett 2002
> # Copyright (C) 2003 Jim McDonough <jmcd at us.ibm.com>
> # Copyright (C) 2002-2003 Jelmer Vernooij <jelmer at samba.org>
> # Copyright (C) 2006 Lars Mueller <lars at samba.org>
> # Copyright (C) 2007 James Peach <jpeach at samba.org>
> # Copyright (C) 2008 Michael Adam <obnox at samba.org>
> ###########################################################################
> 
> prefix=@prefix@
> exec_prefix=@exec_prefix@
> sysconfdir=@sysconfdir@
> localstatedir=@localstatedir@
> datarootdir=@datarootdir@
> 
> selftest_prefix=@selftest_prefix@
> smbtorture4_path=@smbtorture4_path@
> 
> LIBS=@LIBS@
> CC=@CC@
> SHLD=@SHLD@
> LIB_PATH_VAR=@LIB_PATH_VAR@
> 
> ## Dynamic shared libraries build settings
> DSO_EXPORTS_CMD=-Wl,--version-script,$(srcdir)/exports/`basename $@ | sed 's/@SHLIBEXT@$$/@SYMSEXT@/'`
> DSO_EXPORTS=@DSO_EXPORTS@
> SONAME_VER=`grep \^$@ $(builddir)/library-versions | cut -d: -f2`
> SHLD_DSO = $(SHLD) $(LDSHFLAGS) $(DSO_EXPORTS) -o $@
> 
> # The MODULE_EXPORTS variable contains the platform-specific linker flags
> # needed to restrict the exports for VFS, IDMAP, RPC and PASSDB modules.
> MODULE_EXPORTS=@MODULE_EXPORTS@
> 
> # Add $(DEVELOPER_CFLAGS) to $(CFLAGS) to enable extra compiler
> # (GCC) warnings. This is done automtically for --enable-developer
> # and --enable-krb5developer.
> DEVELOPER_CFLAGS=@DEVELOPER_CFLAGS@
> CFLAGS=@CFLAGS@
> CPPFLAGS=-DHAVE_CONFIG_H @CPPFLAGS@
> 
> EXEEXT=@EXEEXT@
> AR=@AR@
> LDSHFLAGS=@LDSHFLAGS@ @RELRO_LDFLAGS@ @LDFLAGS@
> LDFLAGS=@PIE_LDFLAGS@ @RELRO_LDFLAGS@ @LDFLAGS@
> 
> WINBIND_NSS_LDSHFLAGS=@WINBIND_NSS_LDSHFLAGS@ @LDFLAGS@
> AWK=@AWK@
> PICFLAG=@PICFLAG@
> DYNEXP=@DYNEXP@
> PERL=@PERL@
> 
> PIDL_ARGS=@PIDL_ARGS@
> 
> TERMLDFLAGS=@TERMLDFLAGS@
> TERMLIBS=@TERMLIBS@
> PRINT_LIBS=@PRINT_LIBS@
> AUTH_LIBS=@AUTH_LIBS@
> ACL_LIBS=@ACL_LIBS@
> PASSDB_LIBS=@PASSDB_LIBS@
> IDMAP_LIBS=@IDMAP_LIBS@
> KRB5LIBS=@KRB5_LIBS@
> LDAP_LIBS=@LDAP_LIBS@
> NSCD_LIBS=@NSCD_LIBS@
> UUID_LIBS=@UUID_LIBS@
> WINBIND_LIBS=@WINBIND_LIBS@
> WINBIND_NSS_EXTRA_LIBS=@WINBIND_NSS_EXTRA_LIBS@
> WINBIND_NSS_PTHREAD=@WINBIND_NSS_PTHREAD@
> PAM_WINBIND_EXTRA_LIBS=@PAM_WINBIND_EXTRA_LIBS@
> DNSSD_LIBS=@DNSSD_LIBS@
> POPT_LIBS=@POPTLIBS@
> LIBTALLOC_LIBS=@LIBTALLOC_LIBS@
> LIBTDB_LIBS=@LIBTDB_LIBS@
> LIBNETAPI_LIBS=@LIBNETAPI_LIBS@
> 
> INSTALLCMD=@INSTALL@
> INSTALLLIBCMD_SH=@INSTALLLIBCMD_SH@
> INSTALLLIBCMD_A=@INSTALLLIBCMD_A@
> UNINSTALLLIBCMD_SH=@UNINSTALLLIBCMD_SH@
> UNINSTALLLIBCMD_A=@UNINSTALLLIBCMD_A@
> 
> VPATH=@srcdir@
> srcdir=@abs_srcdir@
> builddir=@abs_builddir@
> SHELL=/bin/sh
> DESTDIR=/
> 
> # XXX: Perhaps this should be @SHELL@ instead -- apparently autoconf
> # will search for a POSIX-compliant shell, and that might not be
> # /bin/sh on some platforms.  I guess it's not a big problem -- mbp
> 
> # See the autoconf manual "Installation Directory Variables" for a
> # discussion of the subtle use of these variables.
> 
> BASEDIR= @prefix@
> BINDIR = @bindir@
> # sbindir is mapped to bindir when compiling SAMBA in 2.0.x compatibility mode.
> SBINDIR = @sbindir@
> ROOTSBINDIR = @rootsbindir@
> LIBDIR = @libdir@
> INCLUDEDIR=@includedir@
> PAMMODULESDIR = @pammodulesdir@
> VFSLIBDIR = $(LIBDIR)/vfs
> PDBLIBDIR = $(LIBDIR)/pdb
> RPCLIBDIR = $(LIBDIR)/rpc
> IDMAPLIBDIR = $(LIBDIR)/idmap
> NSSINFOLIBDIR = $(LIBDIR)/nss_info
> CHARSETLIBDIR = $(LIBDIR)/charset
> AUTHLIBDIR = $(LIBDIR)/auth
> CONFIGLIBDIR = $(LIBDIR)/config
> CONFIGDIR = @configdir@
> VARDIR = @localstatedir@
> MANDIR = @mandir@
> DATADIR = @datadir@
> 
> # The permissions to give the executables and other data
> INSTALLPERMS_BIN = 0755
> INSTALLPERMS_DATA = 0644
> 
> # set these to where to find various files
> # These can be overridden by command line switches (see smbd(8))
> # or in smb.conf (see smb.conf(5))
> LOGFILEBASE = @logfilebase@
> CONFIGFILE = $(CONFIGDIR)/smb.conf
> LMHOSTSFILE = $(CONFIGDIR)/lmhosts
> CTDBDIR = @ctdbdir@
> 
> # This is where smbpasswd et al go
> PRIVATEDIR = @privatedir@
> 
> SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd
> PRIVATE_DIR = $(PRIVATEDIR)
> 
> # This is where SWAT images and help files go
> SWATDIR = @swatdir@
> 
> # the directory where lock files go
> LOCKDIR = @lockdir@
> 
> # FHS directories; equal to LOCKDIR if not using --with-fhs
> CACHEDIR = @cachedir@
> STATEDIR = @statedir@
> 
> # Where to look for (and install) codepage databases.
> CODEPAGEDIR = @codepagedir@
> 
> # the directory where pid files go
> PIDDIR = @piddir@
> 
> LIBTALLOC_SHARED_TARGET=@LIBTALLOC_SHARED_TARGET@
> LIBTALLOC_STATIC_TARGET=@LIBTALLOC_STATIC_TARGET@
> LIBTALLOC=$(LIBTALLOC_STATIC_TARGET) @LIBTALLOC_SHARED@
> LIBTALLOC_SYMS=$(srcdir)/exports/libtalloc. at SYMSEXT@
> LIBTALLOC_HEADERS=$(srcdir)/@tallocdir@/talloc.h
> 
> LIBTDB_SHARED_TARGET=@LIBTDB_SHARED_TARGET@
> LIBTDB_STATIC_TARGET=@LIBTDB_STATIC_TARGET@
> LIBTDB=$(LIBTDB_STATIC_TARGET) @LIBTDB_SHARED@
> LIBTDB_SYMS=$(srcdir)/exports/libtdb. at SYMSEXT@
> LIBTDB_HEADERS=$(srcdir)/@tdbdir@/include/tdb.h
> 
> LIBSMBCLIENT=bin/libsmbclient.a @LIBSMBCLIENT_SHARED@
> LIBSMBSHAREMODES=bin/libsmbsharemodes.a @LIBSMBSHAREMODES_SHARED@
> LIBADDNS=bin/libaddns.a @LIBADDNS_SHARED@
> 
> LIBWBCLIENT_SHARED_TARGET=@LIBWBCLIENT_SHARED_TARGET@
> LIBWBCLIENT_STATIC_TARGET=@LIBWBCLIENT_STATIC_TARGET@
> LIBWBCLIENT=@LIBWBCLIENT_STATIC@ @LIBWBCLIENT_SHARED@
> LIBWBCLIENT_SYMS=$(srcdir)/exports/libwbclient. at SYMSEXT@
> LIBWBCLIENT_HEADERS=$(srcdir)/nsswitch/libwbclient/wbclient.h
> 
> LIBNETAPI_SHARED_TARGET=@LIBNETAPI_SHARED_TARGET@
> LIBNETAPI_STATIC_TARGET=@LIBNETAPI_STATIC_TARGET@
> LIBNETAPI=$(LIBNETAPI_STATIC_TARGET) @LIBNETAPI_SHARED@
> LIBNETAPI_SYMS=$(srcdir)/exports/libnetapi. at SYMSEXT@
> LIBNETAPI_HEADERS=$(srcdir)/lib/netapi/netapi.h
> 
> FLAGS1 = $(CFLAGS) @FLAGS1@ @SAMBA_CPPFLAGS@ $(CPPFLAGS)
> FLAGS2 =
> FLAGS3 =
> FLAGS4 = -I$(CTDBDIR)/include
> FLAGS5 = $(FLAGS1) $(FLAGS2) $(FLAGS3) $(FLAGS4)
> FLAGS  = $(ISA) $(FLAGS5) -I$(srcdir)/lib -D_SAMBA_BUILD_=3
> 
> PATH_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" \
> 	-DPRIVATE_DIR=\"$(PRIVATE_DIR)\" \
> 	-DCONFIGFILE=\"$(CONFIGFILE)\" \
> 	-DSBINDIR=\"$(SBINDIR)\" \
> 	-DBINDIR=\"$(BINDIR)\" \
> 	-DLMHOSTSFILE=\"$(LMHOSTSFILE)\" \
> 	-DSWATDIR=\"$(SWATDIR)\" \
> 	-DLOCKDIR=\"$(LOCKDIR)\" \
> 	-DPIDDIR=\"$(PIDDIR)\" \
> 	-DLIBDIR=\"$(LIBDIR)\" \
> 	-DLOGFILEBASE=\"$(LOGFILEBASE)\" \
> 	-DSHLIBEXT=\"@SHLIBEXT@\" \
> 	-DCTDBDIR=\"$(CTDBDIR)\" \
> 	-DCONFIGDIR=\"$(CONFIGDIR)\" \
> 	-DCODEPAGEDIR=\"$(CODEPAGEDIR)\" \
> 	-DCACHEDIR=\"$(CACHEDIR)\" \
> 	-DSTATEDIR=\"$(STATEDIR)\"
> 
> # Note that all executable programs now provide for an optional executable suffix.
> 
> SBIN_PROGS = bin/smbd at EXEEXT@ bin/nmbd at EXEEXT@ @SWAT_SBIN_TARGETS@ @EXTRA_SBIN_PROGS@
> 
> ROOT_SBIN_PROGS = @CIFSMOUNT_PROGS@ @CIFSSPNEGO_PROGS@
> 
> BIN_PROGS1 = bin/smbclient at EXEEXT@ bin/net at EXEEXT@ bin/smbspool at EXEEXT@ \
> 	bin/testparm at EXEEXT@ bin/smbstatus at EXEEXT@ bin/smbget at EXEEXT@
> BIN_PROGS2 = bin/smbcontrol at EXEEXT@ bin/smbtree at EXEEXT@ bin/tdbbackup at EXEEXT@ \
> 	bin/nmblookup at EXEEXT@ bin/pdbedit at EXEEXT@ bin/tdbdump at EXEEXT@ \
> 	bin/tdbtool at EXEEXT@
> BIN_PROGS3 = bin/smbpasswd at EXEEXT@ bin/rpcclient at EXEEXT@ bin/smbcacls at EXEEXT@ \
> 	bin/profiles at EXEEXT@ bin/ntlm_auth at EXEEXT@ \
> 	bin/smbcquotas at EXEEXT@ bin/eventlogadm at EXEEXT@
> BIN_PROGS4 = bin/ldbedit at EXEEXT@ bin/ldbsearch at EXEEXT@ bin/ldbadd at EXEEXT@ \
> 	bin/ldbdel at EXEEXT@ bin/ldbmodify at EXEEXT@
> 
> TORTURE_PROGS = bin/smbtorture at EXEEXT@ bin/msgtest at EXEEXT@ \
> 	bin/masktest at EXEEXT@ bin/locktest at EXEEXT@ \
> 	bin/locktest2 at EXEEXT@ bin/nsstest at EXEEXT@ bin/vfstest at EXEEXT@ \
> 	bin/pdbtest at EXEEXT@ bin/talloctort at EXEEXT@ bin/replacetort at EXEEXT@ \
> 	bin/tdbtorture at EXEEXT@ \
> 	bin/smbconftort at EXEEXT@
> 
> BIN_PROGS = @EXTRA_BIN_PROGS@ \
> 	$(BIN_PROGS1) $(BIN_PROGS2) $(BIN_PROGS3) $(BIN_PROGS4) 
> 
> EVERYTHING_PROGS = bin/debug2html at EXEEXT@ bin/smbfilter at EXEEXT@ \
> 	bin/talloctort at EXEEXT@ bin/replacetort at EXEEXT@ \
> 	bin/log2pcap at EXEEXT@ bin/sharesec at EXEEXT@ bin/ndrdump at EXEEXT@ \
> 	bin/vlp at EXEEXT@ bin/smbiconv at EXEEXT@
> 
> SHLIBS = libtalloc libtdb @LIBWBCLIENT@ @LIBSMBCLIENT@ @LIBSMBSHAREMODES@ @LIBADDNS@ libnetapi
> 
> PAM_MODULES = @PAM_MODULES@
> 
> NSS_MODULES = @NSS_MODULES@
> 
> SCRIPTS = $(srcdir)/script/smbtar $(builddir)/script/findsmb
> 
> VFS_MODULES = @VFS_MODULES@
> PDB_MODULES = @PDB_MODULES@
> RPC_MODULES = @RPC_MODULES@
> IDMAP_MODULES = @IDMAP_MODULES@
> CHARSET_MODULES = @CHARSET_MODULES@
> AUTH_MODULES = @AUTH_MODULES@
> NSS_INFO_MODULES = @NSS_INFO_MODULES@
> MODULES = $(VFS_MODULES) $(PDB_MODULES) $(RPC_MODULES) $(IDMAP_MODULES) \
>           $(CHARSET_MODULES) $(AUTH_MODULES) $(NSS_INFO_MODULES)
> 
> ######################################################################
> # object file lists
> ######################################################################
> 
> LIBTDB_OBJ0 = @TDB_OBJS@
> LIBTDB_OBJ = $(LIBTDB_OBJ0) $(LIBREPLACE_OBJ)
> 
> TDB_OBJ = lib/util_tdb.o \
> 	  lib/dbwrap.o lib/dbwrap_tdb.o \
> 	  lib/dbwrap_tdb2.o lib/dbwrap_ctdb.o \
> 	  lib/dbwrap_rbt.o @LIBTDB_STATIC@
> 
> SMBLDAP_OBJ = @SMBLDAP@ @SMBLDAPUTIL@
> 
> VERSION_OBJ = lib/version.o
> 
> WBCOMMON_OBJ = nsswitch/wb_common.o
> 
> AFS_OBJ = lib/afs.o
> 
> AFS_SETTOKEN_OBJ = lib/afs_settoken.o
> 
> SERVER_MUTEX_OBJ = lib/server_mutex.o
> 
> PASSCHANGE_OBJ = libsmb/passchange.o
> 
> 
> LIBNDR_OBJ = librpc/ndr/ndr_basic.o \
> 	     librpc/ndr/ndr.o \
> 	     librpc/ndr/ndr_misc.o \
> 	     librpc/gen_ndr/ndr_misc.o \
> 	     librpc/gen_ndr/ndr_security.o \
> 	     librpc/ndr/ndr_sec_helper.o \
> 	     librpc/ndr/ndr_string.o \
> 	     librpc/ndr/sid.o \
> 	     librpc/ndr/uuid.o
> 
> RPCCLIENT_NDR_OBJ = rpc_client/ndr.o
> 
> LIBNDR_GEN_OBJ0 = librpc/gen_ndr/ndr_samr.o \
> 		  librpc/gen_ndr/ndr_lsa.o
> 
> LIBNDR_GEN_OBJ1 = librpc/gen_ndr/ndr_netlogon.o
> 
> LIBNDR_GEN_OBJ = librpc/gen_ndr/ndr_wkssvc.o \
> 		 $(LIBNDR_GEN_OBJ0) \
> 		 librpc/gen_ndr/ndr_dfs.o \
> 		 librpc/gen_ndr/ndr_echo.o \
> 		 librpc/gen_ndr/ndr_winreg.o \
> 		 librpc/gen_ndr/ndr_initshutdown.o \
> 		 librpc/gen_ndr/ndr_srvsvc.o \
> 		 librpc/gen_ndr/ndr_eventlog.o \
> 		 $(LIBNDR_GEN_OBJ1) \
> 		 librpc/gen_ndr/ndr_dssetup.o \
> 		 librpc/gen_ndr/ndr_notify.o \
> 		 librpc/gen_ndr/ndr_xattr.o \
> 		 librpc/gen_ndr/ndr_ntsvcs.o
> 
> RPC_PARSE_OBJ0 = rpc_parse/parse_prs.o rpc_parse/parse_misc.o
> 
> # this includes only the low level parse code, not stuff
> # that requires knowledge of security contexts
> RPC_PARSE_OBJ1 = $(RPC_PARSE_OBJ0) rpc_parse/parse_sec.o
> 
> RPC_PARSE_OBJ2 = rpc_parse/parse_rpc.o \
> 		 rpc_client/init_netlogon.o \
> 		 rpc_client/init_lsa.o \
> 		 rpc_client/init_srvsvc.o
> 
> LIBREPLACE_OBJ = @LIBREPLACE_OBJS@
> 
> SOCKET_WRAPPER_OBJ = @SOCKET_WRAPPER_OBJS@
> NSS_WRAPPER_OBJ = @NSS_WRAPPER_OBJS@
> 
> TALLOC_OBJ = @TALLOC_OBJS@
> 
> 
> LIBTALLOC_OBJ0 = $(TALLOC_OBJ)
> LIBTALLOC_OBJ = $(LIBTALLOC_OBJ0) $(LIBREPLACE_OBJ)
> 
> LIBSAMBAUTIL_OBJ = @LIBTALLOC_STATIC@ \
> 		$(LIBREPLACE_OBJ) \
> 		$(SOCKET_WRAPPER_OBJ) \
> 		$(NSS_WRAPPER_OBJ)
> 
> LIB_WITHOUT_PROTO_OBJ = $(LIBSAMBAUTIL_OBJ) \
> 	lib/messages.o librpc/gen_ndr/ndr_messaging.o lib/messages_local.o \
> 	lib/messages_ctdbd.o lib/packet.o lib/ctdbd_conn.o lib/talloc_stack.o \
> 	lib/interfaces.o lib/rbtree.o lib/memcache.o \
> 	lib/util_transfer_file.o lib/async_req.o \
> 	$(TDB_OBJ)
> 
> LIB_WITH_PROTO_OBJ = $(VERSION_OBJ) lib/charcnv.o lib/debug.o lib/fault.o \
> 	  lib/interface.o lib/md4.o \
> 	  lib/pidfile.o \
> 	  lib/signal.o lib/system.o lib/sendfile.o lib/recvfile.o lib/time.o \
> 	  lib/ufc.o lib/genrand.o lib/username.o \
> 	  lib/util_pw.o lib/access.o lib/smbrun.o \
> 	  lib/bitmap.o lib/crc32.o lib/dprintf.o \
> 	  lib/xfile.o lib/wins_srv.o $(UTIL_REG_OBJ) \
> 	  lib/util_str.o lib/clobber.o lib/util_sid.o lib/util_uuid.o \
> 	  lib/util_unistr.o lib/util_file.o lib/data_blob.o \
> 	  lib/util.o lib/util_sock.o lib/sock_exec.o lib/util_sec.o \
> 	  lib/substitute.o lib/fsusage.o lib/dbwrap_util.o \
> 	  lib/ms_fnmatch.o lib/select.o lib/errmap_unix.o \
> 	  lib/tallocmsg.o lib/dmallocmsg.o libsmb/smb_signing.o \
> 	  lib/md5.o lib/hmacmd5.o lib/arc4.o lib/iconv.o \
> 	  lib/pam_errors.o intl/lang_tdb.o lib/conn_tdb.o \
> 	  lib/adt_tree.o lib/gencache.o \
> 	  lib/module.o lib/events.o lib/ldap_escape.o @CHARSET_STATIC@ \
> 	  lib/secdesc.o lib/util_seaccess.o lib/secace.o lib/secacl.o \
> 	  libads/krb5_errs.o lib/system_smbd.o lib/audit.o $(LIBNDR_OBJ) \
> 	  lib/file_id.o
> 
> LIB_OBJ = $(LIB_WITHOUT_PROTO_OBJ) $(LIB_WITH_PROTO_OBJ)
> 
> LIB_DUMMY_OBJ = lib/dummysmbd.o lib/dummyroot.o
> LIB_NONSMBD_OBJ = $(LIB_OBJ) $(LIB_DUMMY_OBJ)
> 
> READLINE_OBJ = lib/readline.o
> 
> # Also depends on  $(SECRETS_OBJ) $(LIBSAMBA_OBJ)
> # Be sure to include them into your application
> POPT_LIB_OBJ = lib/popt_common.o
> 
> PARAM_WITHOUT_REG_OBJ = dynconfig.o param/loadparm.o param/params.o param/util.o lib/sharesec.o lib/ldap_debug_handler.o
> PARAM_REG_ADD_OBJ = $(REG_SMBCONF_OBJ) $(LIBSMBCONF_OBJ) $(PRIVILEGES_BASIC_OBJ)
> PARAM_OBJ = $(PARAM_WITHOUT_REG_OBJ) $(PARAM_REG_ADD_OBJ)
> 
> KRBCLIENT_OBJ = libads/kerberos.o libads/ads_status.o
> 
> LIBADDNS_OBJ0 = libaddns/dnsrecord.o libaddns/dnsutils.o  libaddns/dnssock.o \
> 	       libaddns/dnsgss.o libaddns/dnsmarshall.o
> LIBADDNS_OBJ = $(LIBADDNS_OBJ0) $(SOCKET_WRAPPER_OBJ) @LIBTALLOC_STATIC@
> 
> LIBWBCLIENT_OBJ0 = nsswitch/libwbclient/wbclient.o \
> 		  nsswitch/libwbclient/wbc_util.o \
> 		  nsswitch/libwbclient/wbc_pwd.o \
> 		  nsswitch/libwbclient/wbc_idmap.o \
> 		  nsswitch/libwbclient/wbc_sid.o \
> 		  nsswitch/libwbclient/wbc_pam.o
> LIBWBCLIENT_OBJ = $(LIBWBCLIENT_OBJ0) \
> 		  $(WBCOMMON_OBJ) \
> 		  @LIBTALLOC_STATIC@ $(LIBREPLACE_OBJ)
> 
> LIBGPO_OBJ0 = libgpo/gpo_ldap.o libgpo/gpo_ini.o libgpo/gpo_util.o \
> 	      libgpo/gpo_fetch.o libgpo/gpo_filesync.o libgpo/gpo_sec.o
> LIBGPO_OBJ = $(LIBGPO_OBJ0)
> 
> LIBADS_OBJ = libads/ldap.o libads/ldap_printer.o \
> 	     libads/sasl.o libads/sasl_wrapping.o \
> 	     libads/krb5_setpw.o libads/ldap_user.o \
> 	     libads/ads_struct.o libads/kerberos_keytab.o \
>              libads/disp_sec.o libads/ads_utils.o libads/ldap_utils.o \
> 	     libads/ldap_schema.o libads/util.o libads/ndr.o
> 
> LIBADS_SERVER_OBJ = libads/kerberos_verify.o libads/authdata.o \
> 		    librpc/ndr/ndr_krb5pac.o \
> 		    librpc/gen_ndr/ndr_krb5pac.o
> 
> SECRETS_OBJ = passdb/secrets.o passdb/machine_sid.o
> 
> LIBNBT_OBJ = libcli/nbt/nbtname.o \
> 	     librpc/gen_ndr/ndr_nbt.o \
> 	     librpc/gen_ndr/ndr_svcctl.o
> 
> LIBNMB_OBJ = libsmb/unexpected.o libsmb/namecache.o libsmb/nmblib.o \
> 	     libsmb/namequery.o libsmb/conncache.o libads/dns.o
> 
> NTERR_OBJ = libsmb/nterr.o
> DOSERR_OBJ = libsmb/doserr.o
> ERRORMAP_OBJ = libsmb/errormap.o
> DCE_RPC_ERR_OBJ = libsmb/dcerpc_err.o
> 
> LIBSMB_ERR_OBJ0 = $(NTERR_OBJ) $(DOSERR_OBJ) $(ERRORMAP_OBJ) $(DCE_RPC_ERR_OBJ) \
> 		  libsmb/smbdes.o libsmb/smbencrypt.o libsmb/ntlmssp_parse.o
> 
> LIBSMB_ERR_OBJ = $(LIBSMB_ERR_OBJ0) \
> 		 $(RPC_PARSE_OBJ1) \
> 		 $(SECRETS_OBJ)
> 
> LIBSMB_OBJ0 = \
> 	       libsmb/ntlm_check.o \
> 	       libsmb/ntlmssp.o \
> 	       libsmb/ntlmssp_sign.o
> 
> LIBSAMBA_OBJ = $(LIBSMB_OBJ0) \
> 	       $(LIBSMB_ERR_OBJ)
> 
> CLDAP_OBJ = libads/cldap.o
> 
> LIBSMB_OBJ = libsmb/clientgen.o libsmb/cliconnect.o libsmb/clifile.o \
> 	     libsmb/clikrb5.o libsmb/clispnego.o libsmb/asn1.o \
> 	     libsmb/clirap.o libsmb/clierror.o libsmb/climessage.o \
> 	     libsmb/clireadwrite.o libsmb/clilist.o libsmb/cliprint.o \
> 	     libsmb/clitrans.o libsmb/clisecdesc.o libsmb/clidgram.o \
> 	     libsmb/clistr.o libsmb/cliquota.o libsmb/clifsinfo.o libsmb/clidfs.o \
>              libsmb/smberr.o libsmb/credentials.o libsmb/pwd_cache.o \
> 	     libsmb/clioplock.o libsmb/clirap2.o \
> 	     libsmb/smb_seal.o libsmb/async_smb.o \
> 	     $(LIBSAMBA_OBJ) \
> 	     $(LIBNMB_OBJ) \
> 	     $(LIBNBT_OBJ) \
> 	     $(CLDAP_OBJ)
> 
> RPC_CLIENT_OBJ1 = rpc_client/cli_netlogon.o
> 
> LIBMSRPC_OBJ = rpc_client/cli_lsarpc.o rpc_client/cli_samr.o \
> 	       $(RPC_CLIENT_OBJ1) rpc_client/cli_reg.o $(RPC_CLIENT_OBJ) \
> 	       rpc_client/cli_spoolss.o rpc_client/cli_spoolss_notify.o  \
> 	       rpc_client/cli_svcctl.o \
> 	       rpc_client/init_samr.o
> 
> LIBMSRPC_GEN_OBJ = librpc/gen_ndr/cli_lsa.o \
> 		   librpc/gen_ndr/cli_dfs.o \
> 		   librpc/gen_ndr/cli_echo.o \
> 		   librpc/gen_ndr/cli_srvsvc.o \
> 		   librpc/gen_ndr/cli_svcctl.o \
> 		   librpc/gen_ndr/cli_winreg.o \
> 		   librpc/gen_ndr/cli_initshutdown.o \
> 		   librpc/gen_ndr/cli_eventlog.o \
> 		   librpc/gen_ndr/cli_wkssvc.o \
> 		   librpc/gen_ndr/cli_netlogon.o \
> 		   librpc/gen_ndr/cli_samr.o \
> 		   librpc/gen_ndr/cli_dssetup.o \
> 		   librpc/gen_ndr/cli_ntsvcs.o \
> 		   $(LIBNDR_GEN_OBJ) \
> 		   $(RPCCLIENT_NDR_OBJ)
> 
> #
> # registry-related objects
> #
> UTIL_REG_OBJ = lib/util_reg.o
> UTIL_REG_API_OBJ = lib/util_reg_api.o
> 
> REG_INIT_BASIC_OBJ = registry/reg_init_basic.o
> REG_INIT_SMBCONF_OBJ = registry/reg_init_smbconf.o
> REG_INIT_FULL_OBJ = registry/reg_init_full.o
> 
> REGFIO_OBJ = registry/regfio.o
> 
> REGOBJS_OBJ = registry/reg_objects.o
> 
> REG_BACKENDS_BASE_OBJ = registry/reg_backend_db.o
> 
> REG_BACKENDS_SMBCONF_OBJ = registry/reg_backend_smbconf.o
> 
> REG_BACKENDS_EXTRA_OBJ = registry/reg_backend_printing.o \
> 			 registry/reg_backend_shares.o \
> 			 registry/reg_backend_netlogon_params.o \
> 			 registry/reg_backend_prod_options.o \
> 			 registry/reg_backend_tcpip_params.o \
> 			 registry/reg_backend_hkpt_params.o \
> 			 registry/reg_backend_current_version.o \
> 			 registry/reg_backend_perflib.o
> 
> REG_BASE_OBJ = registry/reg_api.o \
> 	       registry/reg_dispatcher.o \
> 	       registry/reg_cachehook.o \
> 	       $(REGFIO_OBJ) \
> 	       $(REGOBJS_OBJ) \
> 	       registry/reg_util.o \
> 	       $(UTIL_REG_API_OBJ) \
> 	       lib/util_nttoken.o \
> 	       $(REG_BACKENDS_BASE_OBJ) \
> 	       $(REG_INIT_BASIC_OBJ)
> 
> REG_SMBCONF_OBJ = $(REG_BASE_OBJ) \
> 		  $(REG_BACKENDS_SMBCONF_OBJ) \
> 		  $(REG_INIT_SMBCONF_OBJ)
> 
> REG_FULL_OBJ = $(REG_SMBCONF_OBJ) \
> 	       $(REG_BACKENDS_EXTRA_OBJ) \
> 	       $(REG_INIT_FULL_OBJ) \
> 	       registry/reg_eventlog.o \
> 	       registry/reg_perfcount.o \
> 	       registry/reg_util_legacy.o
> 
> 
> RPC_LSA_OBJ = rpc_server/srv_lsa_nt.o librpc/gen_ndr/srv_lsa.o
> 
> RPC_NETLOG_OBJ = rpc_server/srv_netlog_nt.o \
> 		 librpc/gen_ndr/srv_netlogon.o
> 
> RPC_SAMR_OBJ = rpc_server/srv_samr_nt.o \
>                rpc_server/srv_samr_util.o \
> 	       librpc/gen_ndr/srv_samr.o
> 
> RPC_INITSHUTDOWN_OBJ =  librpc/gen_ndr/srv_initshutdown.o rpc_server/srv_initshutdown_nt.o
> 
> RPC_REG_OBJ =  rpc_server/srv_winreg_nt.o \
> 	       librpc/gen_ndr/srv_winreg.o
> 
> RPC_DSSETUP_OBJ =  rpc_server/srv_dssetup_nt.o librpc/gen_ndr/srv_dssetup.o
> 
> RPC_SVC_OBJ = rpc_server/srv_srvsvc_nt.o \
> 	      librpc/gen_ndr/srv_srvsvc.o
> 
> RPC_WKS_OBJ =  librpc/gen_ndr/srv_wkssvc.o rpc_server/srv_wkssvc_nt.o
> 
> RPC_SVCCTL_OBJ =  rpc_server/srv_svcctl.o rpc_server/srv_svcctl_nt.o \
> 		  librpc/gen_ndr/srv_svcctl.o \
>                   services/svc_spoolss.o services/svc_rcinit.o services/services_db.o \
>                   services/svc_netlogon.o services/svc_winreg.o \
>                   services/svc_wins.o
> 
> RPC_NTSVCS_OBJ = rpc_server/srv_ntsvcs.o rpc_server/srv_ntsvcs_nt.o \
> 		 librpc/gen_ndr/srv_ntsvcs.o
> 
> RPC_DFS_OBJ =  librpc/gen_ndr/srv_dfs.o rpc_server/srv_dfs_nt.o
> 
> RPC_SPOOLSS_OBJ = rpc_server/srv_spoolss.o rpc_server/srv_spoolss_nt.o
> 
> RPC_EVENTLOG_OBJ = rpc_server/srv_eventlog.o rpc_server/srv_eventlog_nt.o \
> 		   rpc_server/srv_eventlog_lib.o librpc/gen_ndr/srv_eventlog.o
> 
> RPC_PIPE_OBJ = rpc_server/srv_pipe_hnd.o \
>                rpc_server/srv_pipe.o rpc_server/srv_lsa_hnd.o
> 
> RPC_ECHO_OBJ = rpc_server/srv_echo_nt.o librpc/gen_ndr/srv_echo.o
> 
> RPC_SERVER_OBJ = @RPC_STATIC@ $(RPC_PIPE_OBJ)
> 
> RPC_PARSE_OBJ = $(RPC_PARSE_OBJ2) \
>                 rpc_parse/parse_spoolss.o \
> 	        rpc_parse/parse_eventlog.o rpc_parse/parse_buffer.o \
>                 rpc_parse/parse_ntsvcs.o rpc_parse/parse_svcctl.o
> 
> RPC_CLIENT_OBJ = rpc_client/cli_pipe.o
> 
> LOCKING_OBJ = locking/locking.o locking/brlock.o locking/posix.o
> 
> PRIVILEGES_BASIC_OBJ = lib/privileges_basic.o
> 
> PRIVILEGES_OBJ = lib/privileges.o
> 
> PASSDB_GET_SET_OBJ = passdb/pdb_get_set.o
> 
> PASSDB_OBJ = $(PASSDB_GET_SET_OBJ) passdb/passdb.o passdb/pdb_interface.o \
> 		passdb/util_wellknown.o passdb/util_builtin.o passdb/pdb_compat.o \
> 		passdb/util_unixsids.o passdb/lookup_sid.o \
> 		passdb/login_cache.o @PDB_STATIC@ \
> 		lib/account_pol.o $(PRIVILEGES_OBJ) \
> 		lib/util_nscd.o lib/winbind_util.o
> 
> DEVEL_HELP_WEIRD_OBJ = modules/weird.o
> CP850_OBJ = modules/CP850.o
> CP437_OBJ = modules/CP437.o
> CHARSET_MACOSXFS_OBJ = modules/charset_macosxfs.o
> 
> GROUPDB_OBJ = groupdb/mapping.o groupdb/mapping_tdb.o groupdb/mapping_ldb.o
> 
> PROFILE_OBJ = profile/profile.o
> PROFILES_OBJ = utils/profiles.o \
> 	       $(LIBSAMBA_OBJ) \
> 	       $(PARAM_OBJ) \
>                $(LIB_OBJ) $(LIB_DUMMY_OBJ) \
>                $(POPT_LIB_OBJ)
> 
> OPLOCK_OBJ = smbd/oplock.o smbd/oplock_irix.o smbd/oplock_linux.o
> 
> NOTIFY_OBJ = smbd/notify.o smbd/notify_inotify.o smbd/notify_internal.o
> 
> VFS_DEFAULT_OBJ = modules/vfs_default.o
> VFS_AUDIT_OBJ = modules/vfs_audit.o
> VFS_EXTD_AUDIT_OBJ = modules/vfs_extd_audit.o
> VFS_FULL_AUDIT_OBJ = modules/vfs_full_audit.o
> VFS_FAKE_PERMS_OBJ = modules/vfs_fake_perms.o
> VFS_RECYCLE_OBJ = modules/vfs_recycle.o
> VFS_NETATALK_OBJ = modules/vfs_netatalk.o
> VFS_DEFAULT_QUOTA_OBJ = modules/vfs_default_quota.o
> VFS_READONLY_OBJ = modules/vfs_readonly.o modules/getdate.o
> VFS_CAP_OBJ = modules/vfs_cap.o
> VFS_EXPAND_MSDFS_OBJ = modules/vfs_expand_msdfs.o
> VFS_SHADOW_COPY_OBJ = modules/vfs_shadow_copy.o
> VFS_SHADOW_COPY2_OBJ = modules/vfs_shadow_copy2.o
> VFS_AFSACL_OBJ = modules/vfs_afsacl.o
> VFS_XATTR_TDB_OBJ = modules/vfs_xattr_tdb.o
> VFS_POSIXACL_OBJ = modules/vfs_posixacl.o
> VFS_AIXACL_OBJ = modules/vfs_aixacl.o modules/vfs_aixacl_util.o
> VFS_AIXACL2_OBJ = modules/vfs_aixacl2.o modules/vfs_aixacl_util.o modules/nfs4_acls.o
> VFS_SOLARISACL_OBJ = modules/vfs_solarisacl.o
> VFS_ZFSACL_OBJ = modules/vfs_zfsacl.o modules/nfs4_acls.o
> VFS_HPUXACL_OBJ = modules/vfs_hpuxacl.o
> VFS_IRIXACL_OBJ = modules/vfs_irixacl.o
> VFS_TRU64ACL_OBJ = modules/vfs_tru64acl.o
> VFS_CATIA_OBJ = modules/vfs_catia.o
> VFS_STREAMS_XATTR_OBJ = modules/vfs_streams_xattr.o
> VFS_STREAMS_DEPOT_OBJ = modules/vfs_streams_depot.o
> VFS_CACHEPRIME_OBJ = modules/vfs_cacheprime.o
> VFS_PREALLOC_OBJ = modules/vfs_prealloc.o
> VFS_COMMIT_OBJ = modules/vfs_commit.o
> VFS_GPFS_OBJ = modules/vfs_gpfs.o modules/gpfs.o modules/nfs4_acls.o
> VFS_NOTIFY_FAM_OBJ = modules/vfs_notify_fam.o
> VFS_READAHEAD_OBJ = modules/vfs_readahead.o
> VFS_TSMSM_OBJ = modules/vfs_tsmsm.o
> VFS_FILEID_OBJ = modules/vfs_fileid.o
> VFS_AIO_FORK_OBJ = modules/vfs_aio_fork.o
> VFS_SYNCOPS_OBJ = modules/vfs_syncops.o
> 
> PLAINTEXT_AUTH_OBJ = auth/pampass.o auth/pass_check.o
> 
> SLCACHE_OBJ = libsmb/samlogon_cache.o
> 
> DCUTIL_OBJ  = libsmb/namequery_dc.o libsmb/trustdom_cache.o libsmb/trusts_util.o libsmb/dsgetdcname.o
> 
> AUTH_BUILTIN_OBJ = auth/auth_builtin.o
> AUTH_DOMAIN_OBJ = auth/auth_domain.o
> AUTH_SAM_OBJ = auth/auth_sam.o
> AUTH_SERVER_OBJ = auth/auth_server.o
> AUTH_UNIX_OBJ = auth/auth_unix.o
> AUTH_WINBIND_OBJ = auth/auth_winbind.o
> AUTH_SCRIPT_OBJ = auth/auth_script.o
> 
> AUTH_OBJ = auth/auth.o @AUTH_STATIC@ auth/auth_util.o auth/token_util.o \
> 	   auth/auth_compat.o auth/auth_ntlmssp.o \
> 	   $(PLAINTEXT_AUTH_OBJ) $(SLCACHE_OBJ) $(DCUTIL_OBJ)
> 
> MANGLE_OBJ = smbd/mangle.o smbd/mangle_hash.o smbd/mangle_hash2.o
> 
> SMBD_OBJ_MAIN = smbd/server.o
> 
> BUILDOPT_OBJ = smbd/build_options.o
> 
> SMBD_OBJ_SRV = smbd/files.o smbd/chgpasswd.o smbd/connection.o \
> 	       smbd/utmp.o smbd/session.o smbd/map_username.o \
>                smbd/dfree.o smbd/dir.o smbd/password.o smbd/conn.o \
> 	       smbd/share_access.o smbd/fileio.o \
>                smbd/ipc.o smbd/lanman.o smbd/negprot.o \
>                smbd/message.o smbd/nttrans.o smbd/pipes.o \
>                smbd/reply.o smbd/sesssetup.o smbd/trans2.o smbd/uid.o \
> 	       smbd/dosmode.o smbd/filename.o smbd/open.o smbd/close.o \
> 	       smbd/blocking.o smbd/sec_ctx.o smbd/srvstr.o \
> 	       smbd/vfs.o smbd/statcache.o smbd/seal.o \
>                smbd/posix_acls.o lib/sysacls.o $(SERVER_MUTEX_OBJ) \
> 	       smbd/process.o smbd/service.o smbd/error.o \
> 	       printing/printfsp.o lib/sysquotas.o lib/sysquotas_linux.o \
> 	       lib/sysquotas_xfs.o lib/sysquotas_4A.o \
> 	       smbd/change_trust_pw.o smbd/fake_file.o \
> 	       smbd/quotas.o smbd/ntquotas.o $(AFS_OBJ) smbd/msdfs.o \
> 	       $(AFS_SETTOKEN_OBJ) smbd/aio.o smbd/statvfs.o \
> 	       smbd/dmapi.o \
> 	       smbd/file_access.o \
> 	       smbd/dnsregister.o \
> 	       $(MANGLE_OBJ) @VFS_STATIC@
> 
> SMBD_OBJ_BASE = $(PARAM_WITHOUT_REG_OBJ) $(SMBD_OBJ_SRV) $(LIBSMB_OBJ) \
> 		$(RPC_SERVER_OBJ) $(RPC_PARSE_OBJ) \
> 		$(LOCKING_OBJ) $(PASSDB_OBJ) $(PRINTING_OBJ) $(PROFILE_OBJ) \
> 		$(LIB_OBJ) $(PRINTBACKEND_OBJ) $(OPLOCK_OBJ) \
> 		$(NOTIFY_OBJ) $(GROUPDB_OBJ) $(AUTH_OBJ) \
> 		$(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) \
> 		$(LIBADS_OBJ) $(KRBCLIENT_OBJ) $(LIBADS_SERVER_OBJ) \
> 		$(REG_FULL_OBJ) $(POPT_LIB_OBJ) $(BUILDOPT_OBJ) \
> 		$(SMBLDAP_OBJ) $(LDB_OBJ) $(LIBNET_OBJ) @LIBWBCLIENT_STATIC@ \
> 		$(LIBSMBCONF_OBJ) \
> 		$(PRIVILEGES_BASIC_OBJ)
> 
> PRINTING_OBJ = printing/pcap.o printing/print_svid.o printing/print_aix.o \
>                printing/print_cups.o printing/print_generic.o \
>                printing/lpq_parse.o printing/load.o \
>                printing/print_iprint.o
> 
> PRINTBASE_OBJ = printing/notify.o printing/printing_db.o
> PRINTBACKEND_OBJ = printing/printing.o printing/nt_printing.o $(PRINTBASE_OBJ)
> 
> SMBD_OBJ = $(SMBD_OBJ_BASE) $(SMBD_OBJ_MAIN)
> 
> NMBD_OBJ1 = nmbd/asyncdns.o nmbd/nmbd.o nmbd/nmbd_become_dmb.o \
>             nmbd/nmbd_become_lmb.o nmbd/nmbd_browserdb.o \
>             nmbd/nmbd_browsesync.o nmbd/nmbd_elections.o \
>             nmbd/nmbd_incomingdgrams.o nmbd/nmbd_incomingrequests.o \
>             nmbd/nmbd_lmhosts.o nmbd/nmbd_logonnames.o nmbd/nmbd_mynames.o \
>             nmbd/nmbd_namelistdb.o nmbd/nmbd_namequery.o \
>             nmbd/nmbd_nameregister.o nmbd/nmbd_namerelease.o \
>             nmbd/nmbd_nodestatus.o nmbd/nmbd_packets.o \
>             nmbd/nmbd_processlogon.o nmbd/nmbd_responserecordsdb.o \
>             nmbd/nmbd_sendannounce.o nmbd/nmbd_serverlistdb.o \
>             nmbd/nmbd_subnetdb.o nmbd/nmbd_winsproxy.o nmbd/nmbd_winsserver.o \
>             nmbd/nmbd_workgroupdb.o nmbd/nmbd_synclists.o smbd/connection.o
> 
> NMBD_OBJ = $(NMBD_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
>            $(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
> 	   $(LIBNDR_GEN_OBJ0)
> 
> SWAT_OBJ1 = web/cgi.o web/diagnose.o web/startstop.o web/statuspage.o \
>            web/swat.o web/neg_lang.o
> 
> SWAT_OBJ = $(SWAT_OBJ1) $(PARAM_OBJ) $(PRINTING_OBJ) $(LIBSMB_OBJ) \
> 	   $(LOCKING_OBJ) $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(KRBCLIENT_OBJ) \
> 	   $(LIB_NONSMBD_OBJ) $(GROUPDB_OBJ) $(PLAINTEXT_AUTH_OBJ) \
> 	   $(POPT_LIB_OBJ) $(SMBLDAP_OBJ) $(RPC_PARSE_OBJ) $(LIBMSRPC_GEN_OBJ) $(LIBMSRPC_OBJ) \
>            $(PASSCHANGE_OBJ) $(LDB_OBJ)
> 
> STATUS_OBJ = utils/status.o utils/status_profile.o \
> 	     $(LOCKING_OBJ) $(PARAM_OBJ) \
>              $(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
> 	     $(LIBSAMBA_OBJ)
> 
> SMBCONTROL_OBJ = utils/smbcontrol.o $(LOCKING_OBJ) $(PARAM_OBJ) \
> 	$(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
> 	$(LIBSAMBA_OBJ) \
> 	$(PRINTBASE_OBJ)
> 
> SMBTREE_OBJ = utils/smbtree.o $(PARAM_OBJ) \
>              $(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(LIBSMB_OBJ) \
> 	     $(KRBCLIENT_OBJ) $(POPT_LIB_OBJ) \
>              rpc_client/cli_pipe.o $(RPC_PARSE_OBJ2) \
>              $(RPC_CLIENT_OBJ1) \
> 	     $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(SMBLDAP_OBJ) $(LDB_OBJ) $(GROUPDB_OBJ) \
> 	     $(LIBMSRPC_GEN_OBJ)
> 
> TESTPARM_OBJ = utils/testparm.o \
>                $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
> 	       $(LIBSAMBA_OBJ)
> 
> PASSWD_UTIL_OBJ = utils/passwd_util.o
> 
> SMBPASSWD_OBJ = utils/smbpasswd.o $(PASSWD_UTIL_OBJ) $(PASSCHANGE_OBJ) \
> 		$(PARAM_OBJ) $(LIBSMB_OBJ) $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ \
> 		$(GROUPDB_OBJ) $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) \
> 		$(POPT_LIB_OBJ) $(SMBLDAP_OBJ) $(RPC_PARSE_OBJ) \
> 		$(LIBMSRPC_GEN_OBJ) $(LIBMSRPC_OBJ) $(LDB_OBJ)
> 
> PDBEDIT_OBJ = utils/pdbedit.o $(PASSWD_UTIL_OBJ) $(PARAM_OBJ) $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ \
> 		$(LIBSAMBA_OBJ) \
> 		$(LIB_NONSMBD_OBJ) $(GROUPDB_OBJ) \
> 		$(POPT_LIB_OBJ) $(SMBLDAP_OBJ) libsmb/asn1.o \
> 		$(LDB_OBJ)
> 
> SMBGET_OBJ = utils/smbget.o $(POPT_LIB_OBJ) $(LIBSMBCLIENT_OBJ1) @LIBWBCLIENT_STATIC@
> 
> DISPLAY_SEC_OBJ= lib/display_sec.o
> 
> RPCCLIENT_OBJ1 = rpcclient/rpcclient.o rpcclient/cmd_lsarpc.o \
> 	         rpcclient/cmd_samr.o rpcclient/cmd_spoolss.o \
> 		 rpcclient/cmd_netlogon.o rpcclient/cmd_srvsvc.o \
> 		 rpcclient/cmd_dfs.o \
> 		 rpcclient/cmd_dssetup.o rpcclient/cmd_echo.o \
> 		 rpcclient/cmd_shutdown.o rpcclient/cmd_test.o \
> 		 rpcclient/cmd_wkssvc.o rpcclient/cmd_ntsvcs.o \
> 		 $(DISPLAY_SEC_OBJ)
> 
> RPCCLIENT_OBJ = $(RPCCLIENT_OBJ1) \
>              $(PARAM_OBJ) $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) \
>              $(RPC_PARSE_OBJ) $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(LIBMSRPC_GEN_OBJ) $(LIBMSRPC_OBJ) \
>              $(READLINE_OBJ) $(GROUPDB_OBJ) $(KRBCLIENT_OBJ) \
> 	     $(LIBADS_OBJ) $(POPT_LIB_OBJ) \
> 	     $(SMBLDAP_OBJ) $(DCUTIL_OBJ) $(LDB_OBJ) 
> 
> PAM_WINBIND_OBJ = nsswitch/pam_winbind.o $(WBCOMMON_OBJ) \
> 		  $(LIBREPLACE_OBJ) @BUILD_INIPARSER@
> 
> LIBSMBCLIENT_OBJ0 = \
> 		    libsmb/libsmb_cache.o \
> 		    libsmb/libsmb_compat.o \
> 		    libsmb/libsmb_context.o \
> 		    libsmb/libsmb_dir.o \
> 		    libsmb/libsmb_file.o \
> 		    libsmb/libsmb_misc.o \
> 		    libsmb/libsmb_path.o \
> 		    libsmb/libsmb_printjob.o \
> 		    libsmb/libsmb_server.o \
> 		    libsmb/libsmb_stat.o \
> 		    libsmb/libsmb_xattr.o \
> 		    libsmb/libsmb_setget.o
> 
> LIBSMBCLIENT_OBJ1 = $(LIBSMBCLIENT_OBJ0) \
> 		    $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
> 		    $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
> 		    $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(RPC_PARSE_OBJ) \
> 		    $(PASSDB_OBJ) $(SMBLDAP_OBJ) $(GROUPDB_OBJ) $(LDB_OBJ)
> 
> LIBSMBCLIENT_OBJ = $(LIBSMBCLIENT_OBJ1) @LIBWBCLIENT_STATIC@
> 
> LIBSMBSHAREMODES_OBJ0 = libsmb/smb_share_modes.o
> LIBSMBSHAREMODES_OBJ = $(LIBSMBSHAREMODES_OBJ0) @LIBTDB_STATIC@
> 
> # This shared library is intended for linking with unit test programs
> # to test Samba internals.  It's called libbigballofmud.so to
> # discourage casual usage.
> 
> LIBBIGBALLOFMUD_MAJOR = 0
> 
> LIBBIGBALLOFMUD_OBJ = $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
> 	$(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ \
> 	$(GROUPDB_OBJ) $(KRBCLIENT_OBJ) $(SMBLDAP_OBJ) $(LDB_OBJ)
> 
> CLIENT_OBJ1 = client/client.o client/clitar.o rpc_client/cli_pipe.o \
> 	      client/dnsbrowse.o \
> 	      $(RPC_CLIENT_OBJ1) \
> 	      $(RPC_PARSE_OBJ2)
> 
> CLIENT_OBJ = $(CLIENT_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) \
> 	     $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) $(LIBMSRPC_GEN_OBJ) \
>              $(READLINE_OBJ) $(POPT_LIB_OBJ) \
>              $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(SMBLDAP_OBJ) $(GROUPDB_OBJ) $(LDB_OBJ) \
> 	     $(DISPLAY_SEC_OBJ) 
> 
> LIBNETAPI_OBJ1 = lib/netapi/netapi.o \
> 		 lib/netapi/cm.o \
> 		 librpc/gen_ndr/ndr_libnetapi.o \
> 		 lib/netapi/libnetapi.o \
> 		 lib/netapi/joindomain.o \
> 		 lib/netapi/serverinfo.o \
> 		 lib/netapi/getdc.o \
> 		 lib/netapi/user.o
> 
> LIBNETAPI_OBJ  = $(LIBNETAPI_OBJ1) $(LIBNET_OBJ) \
> 		 $(LIBSMBCONF_OBJ) \
> 		 $(REG_SMBCONF_OBJ) \
> 		 $(PARAM_WITHOUT_REG_OBJ) $(LIB_NONSMBD_OBJ) \
> 		 $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
> 		 $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(RPC_PARSE_OBJ) \
> 		 $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(SMBLDAP_OBJ) $(GROUPDB_OBJ) $(LDB_OBJ) \
> 		 $(DCUTIL_OBJ) $(LIBADS_OBJ) $(PRIVILEGES_BASIC_OBJ)
> 
> LIBSMBCONF_OBJ = lib/smbconf/smbconf.o lib/smbconf/smbconf_util.o \
> 		 lib/smbconf/smbconf_reg.o \
> 		 lib/smbconf/smbconf_txt.o \
> 		 lib/smbconf/smbconf_init.o
> 
> SMBCONFTORT_OBJ0 = lib/smbconf/testsuite.o
> 
> SMBCONFTORT_OBJ = $(SMBCONFTORT_OBJ0) \
> 		  $(LIB_NONSMBD_OBJ) \
> 		  $(PARAM_OBJ) \
> 		  $(LIBSMB_ERR_OBJ) \
> 		  $(POPT_LIB_OBJ)
> 
> LIBNET_OBJ = libnet/libnet_join.o \
> 	     libnet/libnet_samsync.o \
> 	     librpc/gen_ndr/ndr_libnet_join.o
> 
> NET_OBJ1 = utils/net.o utils/net_ads.o utils/net_help.o \
> 	   utils/net_rap.o utils/net_rpc.o utils/net_rpc_samsync.o \
> 	   utils/net_rpc_join.o utils/net_time.o utils/net_lookup.o \
> 	   utils/net_cache.o utils/net_groupmap.o utils/net_idmap.o \
> 	   utils/net_status.o utils/net_rpc_printer.o utils/net_rpc_rights.o \
> 	   utils/net_rpc_service.o utils/net_rpc_registry.o utils/net_usershare.o \
> 	   utils/netlookup.o utils/net_sam.o utils/net_rpc_shell.o \
> 	   utils/net_util.o utils/net_rpc_sh_acct.o utils/net_rpc_audit.o \
> 	   $(PASSWD_UTIL_OBJ) utils/net_dns.o utils/net_ads_gpo.o \
> 	   utils/net_conf.o \
> 	   utils/net_registry.o \
> 	   auth/token_util.o utils/net_dom.o
> 
> # these are not processed by make proto
> NET_OBJ2 = utils/net_registry_util.o
> 
> NET_OBJ = $(NET_OBJ1) \
> 	  $(NET_OBJ2) \
> 	  $(PARAM_WITHOUT_REG_OBJ) $(LIBSMB_OBJ) \
> 	  $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
> 	  $(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(LIBADDNS_OBJ0) \
> 	  $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) \
> 	  $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) $(POPT_LIB_OBJ) \
> 	  $(SMBLDAP_OBJ) $(DCUTIL_OBJ) $(SERVER_MUTEX_OBJ) \
> 	  $(AFS_OBJ) $(AFS_SETTOKEN_OBJ) $(READLINE_OBJ) \
> 	  $(LDB_OBJ) $(LIBGPO_OBJ) @BUILD_INIPARSER@ $(DISPLAY_SEC_OBJ) \
> 	  $(REG_SMBCONF_OBJ) @LIBNETAPI_STATIC@ $(LIBNET_OBJ) \
> 	  $(LIBSMBCONF_OBJ) \
> 	  @LIBWBCLIENT_STATIC@ \
> 	  $(PRIVILEGES_BASIC_OBJ)
> 
> CUPS_OBJ = client/smbspool.o $(PARAM_OBJ) $(LIBSMB_OBJ) \
> 	  $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) $(POPT_LIB_OBJ) \
> 	  $(LIBNDR_GEN_OBJ0)
> 
> CIFS_MOUNT_OBJ = client/mount.cifs.o
> 
> CIFS_UMOUNT_OBJ = client/umount.cifs.o
> 
> CIFS_SPNEGO_OBJ = client/cifs.spnego.o
> 
> NMBLOOKUP_OBJ = utils/nmblookup.o $(PARAM_OBJ) $(LIBNMB_OBJ) \
>                $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) $(LIBSAMBA_OBJ)
> 
> SMBTORTURE_OBJ1 = torture/torture.o torture/nbio.o torture/scanner.o torture/utable.o \
> 		torture/denytest.o torture/mangle_test.o
> 
> SMBTORTURE_OBJ = $(SMBTORTURE_OBJ1) $(PARAM_OBJ) \
> 	$(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) \
> 	$(LIBNDR_GEN_OBJ0)
> 
> MASKTEST_OBJ = torture/masktest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
>                  $(LIB_NONSMBD_OBJ) \
> 		 $(LIBNDR_GEN_OBJ0)
> 
> MSGTEST_OBJ = torture/msgtest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
>                  $(LIB_NONSMBD_OBJ) \
> 		 $(LIBNDR_GEN_OBJ0)
> 
> LOCKTEST_OBJ = torture/locktest.o $(PARAM_OBJ) $(LOCKING_OBJ) $(KRBCLIENT_OBJ) \
>                $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) \
>                $(LIBNDR_GEN_OBJ0)
> 
> NSSTEST_OBJ = torture/nsstest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
>                  $(LIB_NONSMBD_OBJ) \
> 		 $(LIBNDR_GEN_OBJ0)
> 
> PDBTEST_OBJ = torture/pdbtest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
> 		$(LIB_NONSMBD_OBJ) $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(GROUPDB_OBJ) \
> 		$(SMBLDAP_OBJ) $(POPT_LIB_OBJ) $(LDB_OBJ) \
> 		$(LIBNDR_GEN_OBJ0)
> 
> VFSTEST_OBJ = torture/cmd_vfs.o torture/vfstest.o $(SMBD_OBJ_BASE) $(READLINE_OBJ)
> 
> SMBICONV_OBJ = $(PARAM_OBJ) torture/smbiconv.o $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) $(LIBSAMBA_OBJ)
> 
> LOG2PCAP_OBJ = utils/log2pcaphex.o
> 
> LOCKTEST2_OBJ = torture/locktest2.o $(PARAM_OBJ) $(LOCKING_OBJ) $(LIBSMB_OBJ) \
> 		$(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) \
> 		$(LIBNDR_GEN_OBJ0)
> 
> SMBCACLS_OBJ = utils/smbcacls.o $(PARAM_OBJ) $(LIBSMB_OBJ) \
> 		$(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(RPC_PARSE_OBJ) \
> 		$(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(GROUPDB_OBJ) $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) \
> 		$(POPT_LIB_OBJ) $(DCUTIL_OBJ) $(LIBADS_OBJ) $(SMBLDAP_OBJ) $(LDB_OBJ)
> 
> SMBCQUOTAS_OBJ = utils/smbcquotas.o $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
> 		$(PARAM_OBJ) \
> 		$(LIB_NONSMBD_OBJ) $(RPC_PARSE_OBJ) \
> 		$(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(POPT_LIB_OBJ) \
> 		$(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(SMBLDAP_OBJ) $(GROUPDB_OBJ) $(LDB_OBJ)
> 
> EVTLOGADM_OBJ0	= utils/eventlogadm.o
> 
> EVTLOGADM_OBJ	= $(EVTLOGADM_OBJ0) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
> 		$(LIBSAMBA_OBJ) \
> 	        registry/reg_eventlog.o rpc_server/srv_eventlog_lib.o
> 
> SHARESEC_OBJ0 = utils/sharesec.o
> SHARESEC_OBJ  = $(SHARESEC_OBJ0) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
> 		$(LIBSAMBA_OBJ) \
>                 $(POPT_LIB_OBJ)
> 
> TALLOCTORT_OBJ = @tallocdir@/testsuite.o $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
>                  $(LIBSAMBA_OBJ)
> 
> REPLACETORT_OBJ = lib/replace/test/testsuite.o \
> 		lib/replace/test/getifaddrs.o \
> 		lib/replace/test/os2_delete.o \
> 		lib/replace/test/strptime.o \
> 		$(LIBREPLACE_OBJ)
> 
> NDRDUMP_OBJ = librpc/tools/ndrdump.o \
> 	      $(PARAM_OBJ) $(LIBNDR_GEN_OBJ) \
> 	      $(LIBSAMBA_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
> 	      librpc/gen_ndr/ndr_svcctl.o
> 
> DEBUG2HTML_OBJ = utils/debug2html.o utils/debugparse.o
> 
> SMBFILTER_OBJ = utils/smbfilter.o $(PARAM_OBJ) $(LIBSMB_OBJ) \
>                  $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) \
> 		 $(LIBNDR_GEN_OBJ0)
> 
> PROTO_OBJ = $(SMBD_OBJ_MAIN) $(LIBNDR_OBJ) $(LIBNDR_GEN_OBJ) \
> 	    $(SMBD_OBJ_SRV) $(NMBD_OBJ1) $(LIBSMB_OBJ) \
> 	    $(SMBTORTURE_OBJ1) $(RPCCLIENT_OBJ1) \
> 	    $(LIBMSRPC_OBJ) \
> 	    $(LIB_WITH_PROTO_OBJ) \
> 	    $(RPC_PIPE_OBJ) $(RPC_PARSE_OBJ) $(KRBCLIENT_OBJ) \
> 	    $(AUTH_OBJ) $(PARAM_WITHOUT_REG_OBJ) $(LOCKING_OBJ) \
> 	    $(PRINTING_OBJ) $(PRINTBACKEND_OBJ) $(OPLOCK_OBJ) $(NOTIFY_OBJ) \
> 	    $(PASSDB_OBJ) $(GROUPDB_OBJ) \
> 	    $(READLINE_OBJ) $(PROFILE_OBJ) $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) \
> 	    $(AUTH_SAM_OBJ) $(REG_FULL_OBJ) $(POPT_LIB_OBJ) \
> 	    $(RPC_LSA_OBJ) $(RPC_NETLOG_OBJ) $(RPC_SAMR_OBJ) $(RPC_REG_OBJ) $(RPC_DSSETUP_OBJ) \
> 	    $(RPC_SVC_OBJ) $(RPC_WKS_OBJ) $(RPC_DFS_OBJ) $(RPC_SPOOLSS_OBJ) \
> 	    $(RPC_ECHO_OBJ) $(RPC_SVCCTL_OBJ) $(RPC_EVENTLOG_OBJ) $(SMBLDAP_OBJ) \
>             $(IDMAP_OBJ) libsmb/spnego.o $(PASSCHANGE_OBJ) \
> 	    $(RPC_NTSVCS_OBJ) $(RPC_INITSHUTDOWN_OBJ) \
> 	    utils/passwd_util.o $(LIBGPO_OBJ) $(NSS_INFO_OBJ) \
> 	    $(RPCCLIENT_NDR_OBJ) \
> 	    $(PRIVILEGES_BASIC_OBJ)
> 
> WINBIND_WINS_NSS_OBJ = nsswitch/wins.o $(PARAM_OBJ) \
> 	$(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ) \
> 	$(LIBNDR_GEN_OBJ0)
> 
> PAM_SMBPASS_OBJ_0 = pam_smbpass/pam_smb_auth.o pam_smbpass/pam_smb_passwd.o \
> 		pam_smbpass/pam_smb_acct.o pam_smbpass/support.o
> PAM_SMBPASS_OBJ = $(PAM_SMBPASS_OBJ_0) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(GROUPDB_OBJ) \
> 		$(SMBLDAP_OBJ) $(LIBSAMBA_OBJ) \
> 		$(LDB_OBJ)
> 
> IDMAP_OBJ     = winbindd/idmap.o winbindd/idmap_cache.o winbindd/idmap_util.o @IDMAP_STATIC@
> 
> NSS_INFO_OBJ = winbindd/nss_info.o @NSS_INFO_STATIC@
> 
> WINBINDD_OBJ1 = \
> 		winbindd/winbindd.o       \
> 		winbindd/winbindd_user.o  \
> 		winbindd/winbindd_group.o \
> 		winbindd/winbindd_util.o  \
> 		winbindd/winbindd_cache.o \
> 		winbindd/winbindd_pam.o   \
> 		winbindd/winbindd_sid.o   \
> 		winbindd/winbindd_misc.o  \
> 		winbindd/winbindd_cm.o    \
> 		winbindd/winbindd_wins.o  \
> 		winbindd/winbindd_rpc.o   \
> 		winbindd/winbindd_reconnect.o \
> 		winbindd/winbindd_ads.o   \
> 		winbindd/winbindd_passdb.o \
> 		winbindd/winbindd_dual.o  \
> 		winbindd/winbindd_async.o \
> 		winbindd/winbindd_creds.o \
> 		winbindd/winbindd_cred_cache.o \
> 		winbindd/winbindd_ccache_access.o \
> 		winbindd/winbindd_domain.o \
> 		winbindd/winbindd_idmap.o \
> 		winbindd/winbindd_locator.o \
> 		winbindd/winbindd_ndr.o \
> 		auth/token_util.o \
> 		smbd/connection.o
> 
> WINBINDD_OBJ = \
> 		$(WINBINDD_OBJ1) $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(GROUPDB_OBJ) \
> 		$(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
> 		$(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(RPC_PARSE_OBJ) \
> 		$(PROFILE_OBJ) $(SLCACHE_OBJ) $(SMBLDAP_OBJ) \
> 		$(LIBADS_OBJ) $(KRBCLIENT_OBJ) $(POPT_LIB_OBJ) \
> 		$(DCUTIL_OBJ) $(IDMAP_OBJ) $(NSS_INFO_OBJ) \
> 		$(AFS_OBJ) $(AFS_SETTOKEN_OBJ) \
> 		$(LIBADS_SERVER_OBJ) $(SERVER_MUTEX_OBJ) $(LDB_OBJ) 
> 
> WBINFO_OBJ = nsswitch/wbinfo.o $(LIBSAMBA_OBJ) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
> 		$(POPT_LIB_OBJ) $(AFS_SETTOKEN_OBJ) \
> 		lib/winbind_util.o $(WBCOMMON_OBJ) @LIBWBCLIENT_STATIC@
> 
> WINBIND_NSS_OBJ = $(WBCOMMON_OBJ) $(LIBREPLACE_OBJ) @WINBIND_NSS_EXTRA_OBJS@
> 
> LDB_COMMON_OBJ=lib/ldb/common/ldb.o lib/ldb/common/ldb_ldif.o \
>           lib/ldb/common/ldb_parse.o lib/ldb/common/ldb_msg.o lib/ldb/common/ldb_utf8.o \
>           lib/ldb/common/ldb_debug.o lib/ldb/common/ldb_modules.o \
>           lib/ldb/common/ldb_dn.o lib/ldb/common/ldb_match.o lib/ldb/common/ldb_attributes.o \
>           lib/ldb/common/attrib_handlers.o lib/ldb/common/ldb_controls.o lib/ldb/common/qsort.o
> 
> LDB_TDB_OBJ=lib/ldb/ldb_tdb/ldb_tdb.o \
>        lib/ldb/ldb_tdb/ldb_pack.o lib/ldb/ldb_tdb/ldb_search.o lib/ldb/ldb_tdb/ldb_index.o \
>        lib/ldb/ldb_tdb/ldb_cache.o lib/ldb/ldb_tdb/ldb_tdb_wrap.o
> 
> LDB_MODULES_OBJ=lib/ldb/modules/operational.o lib/ldb/modules/rdn_name.o \
>           lib/ldb/modules/objectclass.o \
>           lib/ldb/modules/paged_results.o lib/ldb/modules/sort.o lib/ldb/modules/asq.o
> 
> # enabled in configure.in
> LDB_LDAP_OBJ=@LDBLDAP@
> 
> LDB_OBJ = ${LDB_COMMON_OBJ} ${LDB_TDB_OBJ} ${LDB_LDAP_OBJ} ${LDB_MODULES_OBJ}
> 
> LDB_CMDLINE_OBJ = $(PARAM_OBJ) \
> 	  $(POPT_LIB_OBJ) $(LIB_OBJ) $(LIB_DUMMY_OBJ) $(LIBSMB_ERR_OBJ0) \
> 	  $(RPC_PARSE_OBJ1) $(SECRETS_OBJ) \
> 	  $(LDB_OBJ) lib/ldb/tools/cmdline.o 
> 
> 
> LDBEDIT_OBJ = $(LDB_CMDLINE_OBJ) lib/ldb/tools/ldbedit.o
> LDBSEARCH_OBJ = $(LDB_CMDLINE_OBJ) lib/ldb/tools/ldbsearch.o
> LDBADD_OBJ = $(LDB_CMDLINE_OBJ) lib/ldb/tools/ldbadd.o
> LDBDEL_OBJ = $(LDB_CMDLINE_OBJ) lib/ldb/tools/ldbdel.o
> LDBMODIFY_OBJ = $(LDB_CMDLINE_OBJ) lib/ldb/tools/ldbmodify.o
> 
> WINBIND_KRB5_LOCATOR_OBJ1 = nsswitch/winbind_krb5_locator.o
> WINBIND_KRB5_LOCATOR_OBJ = $(WINBIND_KRB5_LOCATOR_OBJ1) $(WBCOMMON_OBJ) $(LIBREPLACE_OBJ)
> 
> POPT_OBJ=popt/findme.o popt/popt.o popt/poptconfig.o \
>           popt/popthelp.o popt/poptparse.o
> 
> INIPARSER_OBJ = iniparser_build/iniparser.o iniparser_build/dictionary.o \
> 		iniparser_build/strlib.o
> 
> TDBBACKUP_OBJ = @tdbdir@/tools/tdbbackup.o $(LIBREPLACE_OBJ) \
> 	@LIBTDB_STATIC@ $(SOCKET_WRAPPER_OBJ)
> 
> TDBTOOL_OBJ = @tdbdir@/tools/tdbtool.o @LIBTDB_STATIC@ $(LIBREPLACE_OBJ) \
> 	$(SOCKET_WRAPPER_OBJ)
> 
> TDBDUMP_OBJ = @tdbdir@/tools/tdbdump.o @LIBTDB_STATIC@ $(LIBREPLACE_OBJ) \
> 	$(SOCKET_WRAPPER_OBJ)
> 
> TDBTORTURE_OBJ = @tdbdir@/tools/tdbtorture.o @LIBTDB_STATIC@ $(LIBREPLACE_OBJ) \
> 	$(SOCKET_WRAPPER_OBJ)
> 
> 
> NTLM_AUTH_OBJ1 = utils/ntlm_auth.o utils/ntlm_auth_diagnostics.o
> 
> NTLM_AUTH_OBJ = ${NTLM_AUTH_OBJ1} $(LIBSAMBA_OBJ) $(POPT_LIB_OBJ) \
> 		libsmb/asn1.o libsmb/spnego.o libsmb/clikrb5.o libads/kerberos.o \
> 		$(SERVER_MUTEX_OBJ) $(LIBADS_SERVER_OBJ) \
> 		$(PASSDB_OBJ) $(GROUPDB_OBJ) \
> 		$(SMBLDAP_OBJ) $(LIBNMB_OBJ) \
> 		$(LDB_OBJ) $(WBCOMMON_OBJ) @LIBWBCLIENT_STATIC@ \
> 		$(LIBNDR_GEN_OBJ0) $(LIBNDR_GEN_OBJ1)
> 
> 
> VLP_OBJ1 = ../testsuite/printing/vlp.o $(RPC_CLIENT_OBJ1) $(RPC_PARSE_OBJ2) $(RPC_CLIENT_OBJ)
> 
> VLP_OBJ = $(VLP_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) \
> 	  $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) $(LIBMSRPC_GEN_OBJ) \
> 	  $(READLINE_OBJ) $(POPT_LIB_OBJ) \
> 	  $(PASSDB_OBJ) @LIBWBCLIENT_STATIC@ $(SMBLDAP_OBJ) $(GROUPDB_OBJ) $(LDB_OBJ) \
> 	  $(DISPLAY_SEC_OBJ)
> 
> ######################################################################
> # now the rules...
> ######################################################################
> all : SHOWFLAGS $(SHLIBS) $(SBIN_PROGS) $(BIN_PROGS) $(ROOT_SBIN_PROGS) \
> 	$(MODULES) $(NSS_MODULES) $(PAM_MODULES) @EXTRA_ALL_TARGETS@
> 
> nss_modules : $(NSS_MODULES)
> 
> pam_modules : $(PAM_MODULES)
> 
> pam_smbpass : SHOWFLAGS bin/pam_smbpass. at SHLIBEXT@
> 
> pam_winbind : SHOWFLAGS bin/pam_winbind. at SHLIBEXT@
> 
> torture : SHOWFLAGS $(TORTURE_PROGS)
> 
> smbtorture : SHOWFLAGS bin/smbtorture at EXEEXT@
> 
> masktest : SHOWFLAGS bin/masktest at EXEEXT@
> 
> msgtest : SHOWFLAGS bin/msgtest at EXEEXT@
> 
> locktest : SHOWFLAGS bin/locktest at EXEEXT@
> 
> smbcacls : SHOWFLAGS bin/smbcacls at EXEEXT@
> 
> smbcquotas : SHOWFLAGS bin/smbcquotas at EXEEXT@
> 
> locktest2 : SHOWFLAGS bin/locktest2 at EXEEXT@
> 
> debug2html : SHOWFLAGS bin/debug2html at EXEEXT@
> 
> smbfilter : SHOWFLAGS bin/smbfilter at EXEEXT@
> 
> eventlogadm: SHOWFLAGS bin/eventlogadm at EXEEXT@
> 
> sharesec: SHOWFLAGS bin/sharesec at EXEEXT@
> 
> talloctort : SHOWFLAGS bin/talloctort at EXEEXT@
> 
> replacetort : SHOWFLAGS bin/replacetort at EXEEXT@
> 
> smbconftort : SHOWFLAGS bin/smbconftort at EXEEXT@
> 
> timelimit : SHOWFLAGS bin/timelimit at EXEEXT@
> 
> nsswitch : SHOWFLAGS bin/winbindd at EXEEXT@ bin/wbinfo at EXEEXT@ @WINBIND_NSS@ \
> 	@WINBIND_WINS_NSS@ @WINBIND_KRB5_LOCATOR@ \
> 	bin/pam_winbind. at SHLIBEXT@ bin/smbcontrol at EXEEXT@
> 
> wins : SHOWFLAGS @WINBIND_WINS_NSS@
> 
> modules: SHOWFLAGS $(MODULES)
> 
> #####################################################################
> ## Perl IDL Compiler
> IDL_FILES = lsa.idl dfs.idl echo.idl winreg.idl initshutdown.idl \
> 	srvsvc.idl svcctl.idl eventlog.idl wkssvc.idl netlogon.idl notify.idl \
> 	epmapper.idl messaging.idl xattr.idl misc.idl samr.idl security.idl \
> 	dssetup.idl krb5pac.idl ntsvcs.idl libnetapi.idl
> 
> idl:
> 	@IDL_FILES="$(IDL_FILES)" CPP="$(CPP)" PERL="$(PERL)" \
> 	 srcdir="$(srcdir)" $(srcdir)/script/build_idl.sh $(PIDL_ARGS)
> 
> 
> #####################################################################
> 
> 
> everything: all libtalloc libsmbclient libnetapi debug2html smbfilter talloctort replacetort smbconftort modules torture \
> 	$(EVERYTHING_PROGS)
> 
> .SUFFIXES:
> .SUFFIXES: .c .o .lo
> 
> SHOWFLAGS:
> 	@echo "Using FLAGS      = $(FLAGS)"
> 	@echo "      PICFLAG    = $(PICFLAG)"
> 	@echo "      LIBS       = $(LIBS)"
> 	@echo "      LDFLAGS    = $(LDFLAGS)"
> 	@echo "      DYNEXP     = $(DYNEXP)"
> 	@echo "      LDSHFLAGS  = $(LDSHFLAGS)"
> 	@echo "      SHLIBEXT   = @SHLIBEXT@"
> 	@echo "      SONAMEFLAG = @SONAMEFLAG@"
> 
> MAKEDIR = || exec false; \
> 	  if test -d "$$dir"; then :; else \
> 	  echo mkdir "$$dir"; \
> 	  mkdir -p "$$dir" >/dev/null 2>&1 || \
> 	  test -d "$$dir" || \
> 	  mkdir "$$dir" || \
> 	  exec false; fi || exec false
> 
> # Run a static checker.
> CHECK_CC = $(CC_CHECKER) -I. -I$(srcdir) $(FLAGS) $(PICFLAG) -c $< -o $@
> # Compile a source file.
> COMPILE_CC = $(CC) -I. -I$(srcdir) $(FLAGS) $(PICFLAG) -c $< -o $@
> # Compile a source file with the installation paths defined.
> COMPILE_CC_PATH = $(CC) -I. -I$(srcdir) $(PATH_FLAGS) $(FLAGS) $(PICFLAG) -c $< -o $@
> 
> COMPILE = $(COMPILE_CC)
> 
> .c.o:
> 	@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
> 	 dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
> 	@if test -n "$(CC_CHECKER)"; then \
> 	  echo "Checking  $*.c with '$(CC_CHECKER)'";\
> 	  $(CHECK_CC); \
> 	 fi
> 	@echo Compiling $*.c
> 	@$(COMPILE) && exit 0;\
> 		echo "The following command failed:" 1>&2;\
> 		echo "$(COMPILE_CC)" 1>&2;\
> 		$(COMPILE_CC) >/dev/null 2>&1
> @BROKEN_CC@	-mv `echo $@ | sed 's%^.*/%%g'` $@
> 
> PRECOMPILED_HEADER = $(builddir)/include/includes.h.gch
> 
> # this adds support for precompiled headers. To use it, install a snapshot
> # of gcc-3.4 and run 'make pch' before you do the main build.
> pch: proto_exists
> 	rm -f $(PRECOMPILED_HEADER)
> 	$(MAKE) $(PRECOMPILED_HEADER)
> 
> $(PRECOMPILED_HEADER): $(srcdir)/include/includes.h
> 	$(COMPILE)
> 
> BINARY_PREREQS = proto_exists bin/.dummy
> 
> # These dependencies are only approximately correct: we want to make
> # sure Samba's paths are updated if ./configure is re-run.  Really it
> # would be nice if "make prefix=/opt/samba all" also rebuilt things,
> # but since we also require "make install prefix=/opt/samba" *not* to
> # rebuild it's a bit hard.
> 
> dynconfig.o: dynconfig.c Makefile
> 	@echo Compiling $*.c
> 	@$(COMPILE_CC_PATH) && exit 0;\
> 		echo "The following command failed:" 1>&2;\
> 		echo "$(COMPILE_CC_PATH)" 1>&2;\
> 		$(COMPILE_CC_PATH) >/dev/null 2>&1
> 
> lib/pidfile.o: lib/pidfile.c
> 	@echo Compiling $*.c
> 	@$(COMPILE_CC_PATH) && exit 0;\
> 		echo "The following command failed:" 1>&2;\
> 		echo "$(COMPILE_CC_PATH)" 1>&2;\
> 		$(COMPILE_CC_PATH) >/dev/null 2>&1
> 
> lib/version.o: lib/version.c include/version.h
> 	@echo Compiling $*.c
> 	@$(COMPILE_CC_PATH) && exit 0;\
> 		echo "The following command failed:" 1>&2;\
> 		echo "$(COMPILE_CC_PATH)" 1>&2;\
> 		$(COMPILE_CC_PATH) >/dev/null 2>&1
> 
> smbd/build_options.o: smbd/build_options.c Makefile include/config.h include/build_env.h include/proto.h
> 	@echo Compiling $*.c
> 	@$(COMPILE_CC_PATH) && exit 0;\
> 		echo "The following command failed:" 1>&2;\
> 		echo "$(COMPILE_CC_PATH)" 1>&2;\
> 		$(COMPILE_CC_PATH) >/dev/null 2>&1
> 
> smbd/build_options.c: include/config.h.in script/mkbuildoptions.awk
> 	@echo Generating $@
> 	@dir=smbd $(MAKEDIR) && $(AWK) -f $(srcdir)/script/mkbuildoptions.awk > $(builddir)/smbd/build_options.c < $(srcdir)/include/config.h.in
> 
> bin/.dummy:
> 	@if (: >> $@ || : > $@) >/dev/null 2>&1; then :; else \
> 	  dir=bin $(MAKEDIR); fi
> 	@: >> $@ || : > $@ # what a fancy emoticon!
> 
> bin/smbd at EXEEXT@: $(BINARY_PREREQS) $(SMBD_OBJ) @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@ @BUILD_POPT@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SMBD_OBJ) $(LDFLAGS) $(LDAP_LIBS) \
> 		$(KRB5LIBS) $(DYNEXP) $(PRINT_LIBS) $(AUTH_LIBS) \
> 		$(ACL_LIBS) $(PASSDB_LIBS) $(LIBS) $(DNSSD_LIBS) \
> 		$(POPT_LIBS) @SMBD_LIBS@ $(LIBTALLOC_LIBS) $(LIBTDB_LIBS) \
> 		$(WINBIND_LIBS)
> 
> bin/nmbd at EXEEXT@: $(BINARY_PREREQS) $(NMBD_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(NMBD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(POPT_LIBS) \
> 		$(KRB5LIBS) $(LDAP_LIBS)
> 
> bin/swat at EXEEXT@: $(BINARY_PREREQS) $(SWAT_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SWAT_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINT_LIBS) \
> 	  $(AUTH_LIBS) $(LIBS) $(PASSDB_LIBS) $(POPT_LIBS) $(KRB5LIBS) \
> 	  $(LDAP_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/rpcclient at EXEEXT@: $(BINARY_PREREQS) $(RPCCLIENT_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(PASSDB_LIBS) $(RPCCLIENT_OBJ) \
> 		$(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) $(POPT_LIBS) \
> 		$(KRB5LIBS) $(LDAP_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS) \
> 		$(WINBIND_LIBS)
> 
> bin/smbclient at EXEEXT@: $(BINARY_PREREQS) $(CLIENT_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(CLIENT_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(TERMLDFLAGS) $(TERMLIBS) $(LIBS) $(POPT_LIBS) \
> 		$(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS) $(DNSSD_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/net at EXEEXT@: $(BINARY_PREREQS) $(NET_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@ @LIBNETAPI_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(NET_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) \
> 		$(POPT_LIBS) $(KRB5LIBS) $(UUID_LIBS) $(LDAP_LIBS) \
> 		$(PASSDB_LIBS) $(TERMLDFLAGS) $(TERMLIBS) $(NSCD_LIBS) \
> 		@INIPARSERLIBS@ $(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS) $(LIBNETAPI_LIBS)
> 
> bin/profiles at EXEEXT@: $(BINARY_PREREQS) $(PROFILES_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(PROFILES_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) \
> 		$(LDAP_LIBS) $(POPT_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/smbspool at EXEEXT@: $(BINARY_PREREQS) $(CUPS_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(CUPS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) \
> 		$(KRB5LIBS) $(LDAP_LIBS) $(POPT_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/mount.cifs at EXEEXT@: $(BINARY_PREREQS) $(CIFS_MOUNT_OBJ) @BUILD_POPT@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(CIFS_MOUNT_OBJ) $(DYNEXP) $(LDFLAGS) $(POPT_LIBS)
> 
> bin/umount.cifs at EXEEXT@: $(BINARY_PREREQS) $(CIFS_UMOUNT_OBJ) @BUILD_POPT@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(CIFS_UMOUNT_OBJ) $(DYNEXP) $(LDFLAGS) $(POPT_LIBS)
> 
> bin/cifs.spnego at EXEEXT@: $(BINARY_PREREQS) $(CIFS_SPNEGO_OBJ) $(LIBSMBCLIENT_OBJ1) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(CIFS_SPNEGO_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		-lkeyutils $(LIBS) $(LIBSMBCLIENT_OBJ1) $(KRB5LIBS) \
> 		$(LDAP_LIBS) $(POPT_LIBS) $(LIBTALLOC_LIBS) $(WINBIND_LIBS) \
> 		$(LIBTDB_LIBS)
> 
> bin/testparm at EXEEXT@: $(BINARY_PREREQS) $(TESTPARM_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(TESTPARM_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) \
> 		$(LDAP_LIBS) $(POPT_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/smbstatus at EXEEXT@: $(BINARY_PREREQS) $(STATUS_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(STATUS_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) \
> 		$(LDAP_LIBS) $(POPT_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/smbcontrol at EXEEXT@: $(BINARY_PREREQS) $(SMBCONTROL_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) -DUSING_SMBCONTROL $(FLAGS) -o $@ \
> 		$(SMBCONTROL_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		$(LIBS) $(LDAP_LIBS) @LIBUNWIND_PTRACE@ $(POPT_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/smbtree at EXEEXT@: $(BINARY_PREREQS) $(SMBTREE_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SMBTREE_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(LIBS) $(POPT_LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/smbpasswd at EXEEXT@: $(BINARY_PREREQS) $(SMBPASSWD_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SMBPASSWD_OBJ) $(LDFLAGS) $(PASSDB_LIBS) \
> 		$(DYNEXP) $(LIBS) $(POPT_LIBS) $(KRB5LIBS) $(LDAP_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/pdbedit at EXEEXT@: $(BINARY_PREREQS) $(PDBEDIT_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(PDBEDIT_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) \
> 		$(POPT_LIBS) $(PASSDB_LIBS) $(LDAP_LIBS) $(LIBTALLOC_LIBS) \
> 		$(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/smbget at EXEEXT@: $(BINARY_PREREQS) $(SMBGET_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SMBGET_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) \
> 		$(POPT_LIBS)  $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/nmblookup at EXEEXT@: $(BINARY_PREREQS) $(NMBLOOKUP_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(NMBLOOKUP_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) \
> 		$(POPT_LIBS) $(LDAP_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/smbtorture at EXEEXT@: $(BINARY_PREREQS) $(SMBTORTURE_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SMBTORTURE_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(POPT_LIBS) $(LIBTALLOC_LIBS) \
> 		$(LIBTDB_LIBS)
> 
> bin/talloctort at EXEEXT@: $(BINARY_PREREQS) $(TALLOCTORT_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(TALLOCTORT_OBJ) $(LDFLAGS) \
> 		$(DYNEXP) $(LIBS) $(LDAP_LIBS) $(POPT_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/replacetort at EXEEXT@: $(REPLACETORT_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) @PIE_LDFLAGS@ -o $@ $(REPLACETORT_OBJ) $(LDFLAGS) \
> 		$(DYNEXP) $(LIBS) $(POPT_LIBS) $(LIBTALLOC_LIBS)
> 
> bin/smbconftort at EXEEXT@: $(SMBCONFTORT_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) @PIE_LDFLAGS@ -o $@ $(SMBCONFTORT_OBJ) $(LDFLAGS) \
> 		$(DYNEXP) $(LIBS) $(LDAP_LIBS) $(POPT_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/masktest at EXEEXT@: $(BINARY_PREREQS) $(MASKTEST_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(MASKTEST_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(POPT_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/msgtest at EXEEXT@: $(BINARY_PREREQS) $(MSGTEST_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(MSGTEST_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(POPT_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/smbcacls at EXEEXT@: $(BINARY_PREREQS) $(SMBCACLS_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SMBCACLS_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		$(LIBS) $(POPT_LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/smbcquotas at EXEEXT@: $(BINARY_PREREQS) $(SMBCQUOTAS_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SMBCQUOTAS_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		$(LIBS) $(POPT_LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/eventlogadm at EXEEXT@: $(BINARY_PREREQS) $(EVTLOGADM_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(EVTLOGADM_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		$(LIBS) $(LDAP_LIBS) $(POPT_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/sharesec at EXEEXT@: $(BINARY_PREREQS) $(SHARESEC_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SHARESEC_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		$(LIBS) $(LDAP_LIBS) $(POPT_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/locktest at EXEEXT@: $(BINARY_PREREQS) $(LOCKTEST_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LOCKTEST_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(POPT_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/nsstest at EXEEXT@: $(BINARY_PREREQS) $(NSSTEST_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(NSSTEST_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(LIBS) $(KRB5LIBS)  $(LDAP_LIBS) $(POPT_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/pdbtest at EXEEXT@: $(BINARY_PREREQS) $(PDBTEST_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(PDBTEST_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(PASSDB_LIBS) \
> 		$(POPT_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/vfstest at EXEEXT@: $(BINARY_PREREQS) $(VFSTEST_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(VFSTEST_OBJ) $(LDFLAGS) $(TERMLDFLAGS) \
> 		$(TERMLIBS) $(DYNEXP) $(PRINT_LIBS) $(AUTH_LIBS) \
> 		$(ACL_LIBS) $(LIBS) $(POPT_LIBS) $(KRB5LIBS) $(LDAP_LIBS) \
> 		@SMBD_LIBS@ $(NSCD_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS) \
> 		$(WINBIND_LIBS)
> 
> bin/smbiconv at EXEEXT@: $(BINARY_PREREQS) $(SMBICONV_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SMBICONV_OBJ) $(LDFLAGS) $(TERMLDFLAGS) \
> 		$(TERMLIBS) $(DYNEXP) $(LIBS) $(LDAP_LIBS) $(POPT_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/log2pcap at EXEEXT@: $(BINARY_PREREQS) $(LOG2PCAP_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LOG2PCAP_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(POPT_LIBS) $(LIBS) $(LIBTALLOC_LIBS)
> 
> bin/locktest2 at EXEEXT@: $(BINARY_PREREQS) $(LOCKTEST2_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LOCKTEST2_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(POPT_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/ndrdump at EXEEXT@: $(BINARY_PREREQS) $(NDRDUMP_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(NDRDUMP_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) \
> 		$(POPT_LIBS) $(LDAP_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/debug2html at EXEEXT@: $(BINARY_PREREQS) $(DEBUG2HTML_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(DEBUG2HTML_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(LIBS) $(LIBTALLOC_LIBS)
> 
> bin/smbfilter at EXEEXT@: $(BINARY_PREREQS) $(SMBFILTER_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(SMBFILTER_OBJ) $(LDFLAGS) $(LIBS) \
> 		$(KRB5LIBS) $(LDAP_LIBS) $(POPT_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/ldbedit: $(BINARY_PREREQS) $(LDBEDIT_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDBEDIT_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		$(LIBS) $(POPT_LIBS) $(LDAP_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/ldbsearch: $(BINARY_PREREQS) $(LDBSEARCH_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDBSEARCH_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		$(LIBS) $(POPT_LIBS) $(LDAP_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/ldbadd: $(BINARY_PREREQS) $(LDBADD_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDBADD_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		$(LIBS) $(POPT_LIBS) $(LDAP_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/ldbmodify: $(BINARY_PREREQS) $(LDBMODIFY_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDBMODIFY_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		$(LIBS) $(POPT_LIBS) $(LDAP_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/ldbdel: $(BINARY_PREREQS) $(LDBDEL_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDBDEL_OBJ) $(DYNEXP) $(LDFLAGS) \
> 		$(LIBS) $(POPT_LIBS) $(LDAP_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> MKSYMS_SH = $(srcdir)/script/mksyms.sh
> 
> $(LIBTALLOC_SYMS): $(LIBTALLOC_HEADERS)
> 	@$(MKSYMS_SH) $(AWK) $@ $(LIBTALLOC_HEADERS)
> 
> $(LIBTALLOC_SHARED_TARGET): $(BINARY_PREREQS) $(LIBTALLOC_OBJ) $(LIBTALLOC_SYMS)
> 	@echo Linking shared library $@
> 	@$(SHLD_DSO) $(LIBTALLOC_OBJ) \
> 		@SONAMEFLAG@`basename $@`.$(SONAME_VER)
> 	@rm -f $@.$(SONAME_VER)
> 	@ln -s -f `basename $@` $@.$(SONAME_VER)
> 
> $(LIBTALLOC_STATIC_TARGET): $(BINARY_PREREQS) $(LIBTALLOC_OBJ0)
> 	@echo Linking non-shared library $@
> 	@-$(AR) -rc $@ $(LIBTALLOC_OBJ0)
> 
> $(LIBTDB_SYMS): $(LIBTDB_HEADERS)
> 	@$(MKSYMS_SH) $(AWK) $@ $(LIBTDB_HEADERS)
> 
> $(LIBTDB_SHARED_TARGET): $(BINARY_PREREQS) $(LIBTDB_OBJ) $(LIBTDB_SYMS)
> 	@echo Linking shared library $@
> 	@$(SHLD_DSO) $(LIBTDB_OBJ) \
> 		@SONAMEFLAG@`basename $@`.$(SONAME_VER)
> 	@rm -f $@.$(SONAME_VER)
> 	@ln -s -f `basename $@` $@.$(SONAME_VER)
> 
> $(LIBTDB_STATIC_TARGET): $(BINARY_PREREQS) $(LIBTDB_OBJ0)
> 	@echo Linking non-shared library $@
> 	@-$(AR) -rc $@ $(LIBTDB_OBJ0)
> 
> $(LIBWBCLIENT_SYMS): $(LIBWBCLIENT_HEADERS)
> 	@$(MKSYMS_SH) $(AWK) $@ $(LIBWBCLIENT_HEADERS)
> 
> $(LIBWBCLIENT_SHARED_TARGET): $(BINARY_PREREQS) $(LIBWBCLIENT_OBJ) $(LIBWBCLIENT_SYMS) @LIBTALLOC_SHARED@
> 	@echo Linking shared library $@
> 	@$(SHLD_DSO) $(LIBTALLOC_LIBS) $(LIBWBCLIENT_OBJ) \
> 		@SONAMEFLAG@`basename $@`.$(SONAME_VER)
> 	@rm -f $@.$(SONAME_VER)
> 	@ln -s -f `basename $@` $@.$(SONAME_VER)
> 
> $(LIBWBCLIENT_STATIC_TARGET): $(BINARY_PREREQS) $(LIBWBCLIENT_OBJ0) $(WBCOMMON_OBJ)
> 	@echo Linking non-shared library $@
> 	@-$(AR) -rc $@ $(LIBWBCLIENT_OBJ0) $(WBCOMMON_OBJ)
> 
> bin/libaddns. at SHLIBEXT@: $(BINARY_PREREQS) $(LIBADDNS_OBJ) @LIBTALLOC_SHARED@
> 	@echo Linking shared library $@
> 	@$(SHLD_DSO) $(LIBADDNS_OBJ) $(LIBS) \
> 		$(KRB5LIBS) $(UUID_LIBS) $(LIBTALLOC_LIBS) \
> 		@SONAMEFLAG@`basename $@`.$(SONAME_VER)
> 
> bin/libaddns.a: $(BINARY_PREREQS) $(LIBADDNS_OBJ0)
> 	@echo Linking non-shared library $@
> 	@-$(AR) -rc $@ $(LIBADDNS_OBJ0)
> 
> $(LIBNETAPI_SYMS): $(LIBNETAPI_HEADERS)
> 	@$(MKSYMS_SH) $(AWK) $@ $(LIBNETAPI_HEADERS)
> 
> $(LIBNETAPI_SHARED_TARGET): $(BINARY_PREREQS) $(LIBNETAPI_OBJ) $(LIBNETAPI_SYMS) @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking shared library $@
> 	@$(SHLD_DSO) $(LIBNETAPI_OBJ) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS) $(LIBS) \
> 		$(LDAP_LIBS) $(KRB5LIBS) $(NSCD_LIBS) \
> 		@SONAMEFLAG@`basename $@`.$(SONAME_VER)
> 	@rm -f $@.$(SONAME_VER)
> 	@ln -s -f `basename $@` $@.$(SONAME_VER)
> 
> $(LIBNETAPI_STATIC_TARGET): $(BINARY_PREREQS) $(LIBNETAPI_OBJ1)
> 	@echo Linking non-shared library $@
> 	@-$(AR) -rc $@ $(LIBNETAPI_OBJ1)
> 
> bin/libsmbclient. at SHLIBEXT@: $(BINARY_PREREQS) $(LIBSMBCLIENT_OBJ) @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking shared library $@
> 	@$(SHLD_DSO) $(LIBSMBCLIENT_OBJ) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS) $(LIBS) \
> 		$(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS) \
> 		@SONAMEFLAG@`basename $@`.$(SONAME_VER)
> 
> bin/libsmbclient.a: $(BINARY_PREREQS) $(LIBSMBCLIENT_OBJ0)
> 	@echo Linking non-shared library $@
> 	@-$(AR) -rc $@ $(LIBSMBCLIENT_OBJ0)
> 
> bin/libsmbsharemodes. at SHLIBEXT@: $(BINARY_PREREQS) $(LIBSMBSHAREMODES_OBJ) @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking shared library $@
> 	@$(SHLD_DSO) $(LIBSMBSHAREMODES_OBJ) \
> 		$(LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS) \
> 		$(KRB5LIBS) $(LDAP_LIBS) \
> 		@SONAMEFLAG@`basename $@`.$(SONAME_VER)
> 
> bin/libsmbsharemodes.a: $(BINARY_PREREQS) $(LIBSMBSHAREMODES_OBJ0)
> 	@echo Linking non-shared library $@
> 	@-$(AR) -rc $@ $(LIBSMBSHAREMODES_OBJ0)
> 
> # This is probably wrong for anything other than the GNU linker.
> bin/libbigballofmud. at SHLIBEXT@: $(BINARY_PREREQS) $(LIBBIGBALLOFMUD_OBJ) @LIBTALLOC_SHARED@
> 	@echo Linking shared library $@
> 	@$(SHLD) $(LDSHFLAGS) -o $@ $(LIBBIGBALLOFMUD_OBJ) \
> 		$(LIBS) $(LIBTALLOC_LIBS) \
> 		$(PASSDB_LIBS) $(IDMAP_LIBS) $(KRB5LIBS) $(LDAP_LIBS) \
> 		@SONAMEFLAG@`basename $@`.$(LIBBIGBALLOFMUD_MAJOR)
> 	ln -snf libbigballofmud.so bin/libbigballofmud.so.0
> 
> # It would be nice to build a static bigballofmud too, but when I try
> # I get linker errors about dl_open and similar things.  I'm not sure if
> # it can be fixed or if they just can't be called from a static
> # library.
> 
> libtalloc: $(LIBTALLOC)
> libtdb: $(LIBTDB)
> libsmbclient: $(LIBSMBCLIENT)
> libsmbsharemodes: $(LIBSMBSHAREMODES)
> libaddns: $(LIBADDNS)
> libwbclient: $(LIBWBCLIENT)
> libnetapi: $(LIBNETAPI)
> 
> # Linker command to link a RPC, VFS, AUTH, CHARSET or PASSDB module.
> SHLD_MODULE = $(SHLD) $(LDSHFLAGS) $(MODULE_EXPORTS) \
> 	      -o $@ @SONAMEFLAG@`basename $@`
> 
> bin/librpc_lsarpc. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_LSA_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_LSA_OBJ)
> 
> bin/librpc_samr. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_SAMR_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_SAMR_OBJ)
> 
> bin/librpc_srvsvc. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_SVC_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_SVC_OBJ)
> 
> bin/librpc_svcctl. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_SVCCTL_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_SVCCTL_OBJ)
> 
> bin/librpc_ntsvcs. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_NTSVCS_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_NTSVCS_OBJ)
> 
> bin/librpc_wkssvc. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_WKS_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_WKS_OBJ)
> 
> bin/librpc_NETLOGON. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_NETLOG_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_NETLOG_OBJ)
> 
> bin/librpc_winreg. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_REG_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_REG_OBJ)
> 
> bin/librpc_initshutdown. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_INITSHUTDOWN_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_INITSHUTDOWN_OBJ)
> 
> bin/librpc_dssetup. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_DSSETUP_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_DSSETUP_OBJ)
> 
> bin/librpc_spoolss. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_SPOOLSS_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_SPOOLSS_OBJ)
> 
> bin/librpc_eventlog. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_EVENTLOG_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_EVENTLOG_OBJ)
> 
> bin/librpc_netdfs. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_DFS_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_DFS_OBJ)
> 
> bin/librpc_echo. at SHLIBEXT@: $(BINARY_PREREQS) $(RPC_ECHO_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD_MODULE) $(RPC_ECHO_OBJ)
> 
> bin/winbindd at EXEEXT@: $(BINARY_PREREQS) $(WINBINDD_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo "Linking $@"
> 	@$(CC) $(FLAGS) -o $@ $(WINBINDD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) \
> 		$(POPT_LIBS) $(KRB5LIBS) $(LDAP_LIBS) \
> 		$(PASSDB_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/vlp at EXEEXT@: $(BINARY_PREREQS) $(VLP_OBJ) @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo "Linking $@"
> 	@$(CC) $(FLAGS) -o $@ $(VLP_OBJ) $(LDFLAGS) $(DYNEXP) \
> 		$(TERMLDFLAGS) $(TERMLIBS) $(LIBS) $(POPT_LIBS) \
> 		$(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> @WINBIND_NSS@: $(BINARY_PREREQS) $(WINBIND_NSS_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD) $(WINBIND_NSS_LDSHFLAGS) -o $@ $(WINBIND_NSS_OBJ) \
> 		$(WINBIND_NSS_EXTRA_LIBS) $(WINBIND_NSS_PTHREAD) \
> 		@SONAMEFLAG@`basename $@`@NSSSONAMEVERSIONSUFFIX@
> 
> @WINBIND_WINS_NSS@: $(BINARY_PREREQS) $(WINBIND_WINS_NSS_OBJ) @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo "Linking $@"
> 	@$(SHLD) $(LDSHFLAGS) -o $@ $(WINBIND_WINS_NSS_OBJ) \
> 		$(LDAP_LIBS) $(KRB5LIBS) $(LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS) \
> 		@SONAMEFLAG@`basename $@`@NSSSONAMEVERSIONSUFFIX@
> 
> bin/winbind_krb5_locator. at SHLIBEXT@: $(BINARY_PREREQS) $(WINBIND_KRB5_LOCATOR_OBJ)
> 	@echo "Linking $@"
> 	@$(SHLD) $(LDSHFLAGS) -o $@ $(WINBIND_KRB5_LOCATOR_OBJ) \
> 		@SONAMEFLAG@`basename $@`
> 
> bin/pam_winbind. at SHLIBEXT@: $(BINARY_PREREQS) $(PAM_WINBIND_OBJ)
> 	@echo "Linking shared library $@"
> 	@$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_WINBIND_OBJ) -lpam @INIPARSERLIBS@ \
> 		$(PAM_WINBIND_EXTRA_LIBS) @SONAMEFLAG@`basename $@`
> 
> bin/builtin. at SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_BUILTIN_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(AUTH_BUILTIN_OBJ)
> 
> bin/domain. at SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_DOMAIN_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(AUTH_DOMAIN_OBJ)
> 
> bin/script. at SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_SCRIPT_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(AUTH_SCRIPT_OBJ)
> 
> bin/smbserver. at SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_SERVER_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(AUTH_SERVER_OBJ)
> 
> bin/winbind. at SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_WINBIND_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(AUTH_WINBIND_OBJ)
> 
> bin/unix. at SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_UNIX_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(AUTH_UNIX_OBJ)
> 
> bin/sam. at SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_SAM_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(AUTH_SAM_OBJ)
> 
> bin/ldapsam. at SHLIBEXT@: $(BINARY_PREREQS) passdb/pdb_ldap.o passdb/pdb_nds.o
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) passdb/pdb_ldap.o passdb/pdb_nds.o $(LDAP_LIBS)
> 
> bin/tdbsam. at SHLIBEXT@: $(BINARY_PREREQS) passdb/pdb_tdb.o
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) passdb/pdb_tdb.o
> 
> bin/smbpasswd. at SHLIBEXT@: $(BINARY_PREREQS) passdb/pdb_smbpasswd.o
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) passdb/pdb_smbpasswd.o
> 
> bin/rid. at SHLIBEXT@: $(BINARY_PREREQS) winbindd/idmap_rid.o
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) winbindd/idmap_rid.o
> 
> bin/ad. at SHLIBEXT@: $(BINARY_PREREQS) winbindd/idmap_ad.o
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) winbindd/idmap_ad.o
> 
> bin/tdb2. at SHLIBEXT@: $(BINARY_PREREQS) winbindd/idmap_tdb2.o
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) winbindd/idmap_tdb2.o
> 
> bin/ldap. at SHLIBEXT@: $(BINARY_PREREQS) winbindd/idmap_ldap.o
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) winbindd/idmap_ldap.o
> 
> bin/weird. at SHLIBEXT@: $(BINARY_PREREQS) $(DEVEL_HELP_WEIRD_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(DEVEL_HELP_WEIRD_OBJ)
> 
> bin/CP850. at SHLIBEXT@: $(BINARY_PREREQS) $(CP850_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(CP850_OBJ)
> 
> bin/CP437. at SHLIBEXT@: $(BINARY_PREREQS) $(CP437_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(CP437_OBJ)
> 
> bin/macosxfs. at SHLIBEXT@: $(BINARY_PREREQS) $(CHARSET_MACOSXFS_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(CHARSET_MACOSXFS_OBJ) -framework CoreFoundation
> 
> # NOTE, there is no build rule for a dynamic default VFS module because
> # this one MUST MUST MUST be built statically.
> 
> bin/audit. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_AUDIT_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_AUDIT_OBJ)
> 
> bin/extd_audit. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_EXTD_AUDIT_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_EXTD_AUDIT_OBJ)
> 
> bin/full_audit. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_FULL_AUDIT_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_FULL_AUDIT_OBJ)
> 
> bin/recycle. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_RECYCLE_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_RECYCLE_OBJ)
> 
> bin/netatalk. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_NETATALK_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_NETATALK_OBJ)
> 
> bin/fake_perms. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_FAKE_PERMS_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_FAKE_PERMS_OBJ)
> 
> bin/default_quota. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_DEFAULT_QUOTA_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_DEFAULT_QUOTA_OBJ)
> 
> bin/readonly. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_READONLY_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_READONLY_OBJ)
> 
> bin/shadow_copy. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_SHADOW_COPY_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_SHADOW_COPY_OBJ)
> 
> bin/shadow_copy2. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_SHADOW_COPY2_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_SHADOW_COPY2_OBJ)
> 
> bin/syncops. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_SYNCOPS_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_SYNCOPS_OBJ)
> 
> bin/cap. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_CAP_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_CAP_OBJ)
> 
> bin/expand_msdfs. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_EXPAND_MSDFS_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_EXPAND_MSDFS_OBJ)
> 
> bin/afsacl. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_AFSACL_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_AFSACL_OBJ)
> 
> bin/xattr_tdb. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_XATTR_TDB_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_XATTR_TDB_OBJ)
> 
> bin/posixacl. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_POSIXACL_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_POSIXACL_OBJ)
> 
> bin/aixacl. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_AIXACL_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_AIXACL_OBJ)
> 
> bin/aixacl2. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_AIXACL2_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_AIXACL2_OBJ)
> 
> bin/solarisacl. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_SOLARISACL_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_SOLARISACL_OBJ)
> 
> bin/zfsacl. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_ZFSACL_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_ZFSACL_OBJ)
> 
> bin/irixacl. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_IRIXACL_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_IRIXACL_OBJ)
> 
> bin/hpuxacl. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_HPUXACL_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_HPUXACL_OBJ)
> 
> bin/tru64acl. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_TRU64ACL_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_TRU64ACL_OBJ)
> 
> bin/catia. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_CATIA_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_CATIA_OBJ)
> 
> bin/streams_xattr. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_STREAMS_XATTR_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_STREAMS_XATTR_OBJ)
> 
> bin/streams_depot. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_STREAMS_DEPOT_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_STREAMS_DEPOT_OBJ)
> 
> bin/cacheprime. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_CACHEPRIME_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_CACHEPRIME_OBJ)
> 
> bin/prealloc. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_PREALLOC_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_PREALLOC_OBJ)
> 
> bin/commit. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_COMMIT_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_COMMIT_OBJ)
> 
> bin/gpfs. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_GPFS_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_GPFS_OBJ)
> 
> bin/notify_fam. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_NOTIFY_FAM_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_NOTIFY_FAM_OBJ) @SMB_FAM_LIBS@
> 
> bin/readahead. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_READAHEAD_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_READAHEAD_OBJ)
> 
> bin/tsmsm. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_TSMSM_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_TSMSM_OBJ)
> 
> bin/fileid. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_FILEID_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_FILEID_OBJ)
> 
> bin/aio_fork. at SHLIBEXT@: $(BINARY_PREREQS) $(VFS_AIO_FORK_OBJ)
> 	@echo "Building plugin $@"
> 	@$(SHLD_MODULE) $(VFS_AIO_FORK_OBJ)
> 
> #########################################################
> ## IdMap NSS plugins
> 
> ## None here right now
> #########################################################
> 
> bin/wbinfo at EXEEXT@: $(BINARY_PREREQS) $(WBINFO_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(WBINFO_OBJ) $(DYNEXP) $(LIBS) \
> 		$(LDAP_LIBS) $(POPT_LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS) \
> 		$(WINBIND_LIBS)
> 
> bin/ntlm_auth at EXEEXT@: $(BINARY_PREREQS) $(NTLM_AUTH_OBJ) $(PARAM_OBJ) \
> 	$(LIB_NONSMBD_OBJ) @BUILD_POPT@ @LIBTALLOC_SHARED@ @LIBTDB_SHARED@ @LIBWBCLIENT_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(DYNEXP) $(NTLM_AUTH_OBJ) \
> 		$(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(LIBS) \
> 		$(POPT_LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/pam_smbpass. at SHLIBEXT@: $(BINARY_PREREQS) $(PAM_SMBPASS_OBJ) @LIBTALLOC_SHARED@ @LIBWBCLIENT_SHARED@ @LIBTDB_SHARED@
> 	@echo "Linking shared library $@"
> 	@$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_SMBPASS_OBJ) -lpam $(DYNEXP) \
> 		$(LIBS) $(LDAP_LIBS) $(KRB5LIBS) $(NSCD_LIBS) \
> 		$(LIBTALLOC_LIBS) $(LIBTDB_LIBS) $(WINBIND_LIBS)
> 
> bin/tdbbackup at EXEEXT@: $(BINARY_PREREQS) $(TDBBACKUP_OBJ) @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(TDBBACKUP_OBJ) $(DYNEXP) \
> 		$(LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/tdbtool at EXEEXT@: $(BINARY_PREREQS) $(TDBTOOL_OBJ) @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(TDBTOOL_OBJ) $(DYNEXP) \
> 		$(LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/tdbdump at EXEEXT@: $(BINARY_PREREQS) $(TDBDUMP_OBJ) @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(TDBDUMP_OBJ) $(DYNEXP) \
> 		$(LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/tdbtorture at EXEEXT@: $(BINARY_PREREQS) $(TDBTORTURE_OBJ) @LIBTALLOC_SHARED@ @LIBTDB_SHARED@
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(TDBTORTURE_OBJ) $(DYNEXP) \
> 		$(LIBS) $(LIBTALLOC_LIBS) $(LIBTDB_LIBS)
> 
> bin/t_strcmp at EXEEXT@: $(BINARY_PREREQS) @LIBTALLOC_SHARED@ bin/libbigballofmud. at SHLIBEXT@ torture/t_strcmp.o
> 	$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) $(LIBTALLOC_LIBS) \
> 		torture/t_strcmp.o -L ./bin -lbigballofmud
> 
> bin/t_strstr at EXEEXT@: $(BINARY_PREREQS) @LIBTALLOC_SHARED@ bin/libbigballofmud. at SHLIBEXT@ torture/t_strstr.o
> 	$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) $(LIBTALLOC_LIBS) \
> 		torture/t_strstr.o -L ./bin -lbigballofmud
> 
> bin/t_strappend at EXEEXT@: $(BINARY_PREREQS) @LIBTALLOC_SHARED@ bin/libbigballofmud. at SHLIBEXT@ torture/t_strappend.o
> 	$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) $(LIBTALLOC_LIBS) \
> 		torture/t_strappend.o -L ./bin -lbigballofmud
> 
> bin/t_stringoverflow at EXEEXT@: $(BINARY_PREREQS) bin/libbigballofmud. at SHLIBEXT@ torture/t_stringoverflow.o
> 	$(CC) $(FLAGS) -o $@ $(DYNEXP) torture/t_stringoverflow.o \
> 		-L./bin -lbigballofmud
> 
> bin/timelimit at EXEEXT@: script/tests/timelimit.o
> 	@echo Linking $@
> 	@$(CC) $(FLAGS) -o $@ $(DYNEXP) script/tests/timelimit.o
> 
> install: installservers installbin @INSTALL_CIFSMOUNT@ @INSTALL_CIFSSPNEGO@ installman \
> 		installscripts installdat installmodules @SWAT_INSTALL_TARGETS@ \
> 		installlibtalloc \
> 		installlibtdb \
> 		@INSTALL_LIBSMBCLIENT@ @INSTALL_PAM_MODULES@ \
> 		@INSTALL_LIBSMBSHAREMODES@ @INSTALL_LIBWBCLIENT@ installlibnetapi
> 
> install-everything: install installmodules
> 
> # DESTDIR is used here to prevent packagers wasting their time
> # duplicating the Makefile. Remove it and you will have the privelege
> # of package each samba release for muliple versions of multiple
> # distributions and operating systems, or at least supplying patches
> # to all the packaging files required for this, prior to committing
> # the removal of DESTDIR. Do not remove it even though you think it
> # is not used
> 
> installdirs:
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(BINDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(PRIVATEDIR) $(PIDDIR) $(LOCKDIR) $(MANDIR)
> 
> installservers: all installdirs
> 	@$(SHELL) script/installbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(SBINDIR) $(SBIN_PROGS)
> 
> installbin: all installdirs
> 	@$(SHELL) script/installbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(BINDIR) $(BIN_PROGS)
> 
> installcifsmount: @CIFSMOUNT_PROGS@
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(ROOTSBINDIR)
> 	@$(SHELL) script/installbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(ROOTSBINDIR) @CIFSMOUNT_PROGS@
> 
> installcifsspnego: @CIFSSPNEGO_PROGS@
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(ROOTSBINDIR)
> 	@$(SHELL) script/installbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(ROOTSBINDIR) @CIFSSPNEGO_PROGS@
> 
> # Some symlinks are required for the 'probing' of modules.
> # This mechanism should go at some point..
> installmodules: modules installdirs
> 	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(VFSLIBDIR) $(VFS_MODULES)
> 	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(PDBLIBDIR) $(PDB_MODULES)
> 	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(RPCLIBDIR) $(RPC_MODULES)
> 	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(IDMAPLIBDIR) $(IDMAP_MODULES)
> 	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(NSSINFOLIBDIR) $(NSS_INFO_MODULES)
> 	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(CHARSETLIBDIR) $(CHARSET_MODULES)
> 	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(AUTHLIBDIR) $(AUTH_MODULES)
> 	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(PDBLIBDIR) ldapsam. at SHLIBEXT@ NDS_ldapsam. at SHLIBEXT@
> 	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(PDBLIBDIR) ldapsam. at SHLIBEXT@ NDS_ldapsam_compat. at SHLIBEXT@
> 	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(PDBLIBDIR) ldapsam. at SHLIBEXT@ ldapsam_compat. at SHLIBEXT@
> 	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) rhosts. at SHLIBEXT@ hostsequiv. at SHLIBEXT@
> 	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) sam. at SHLIBEXT@ sam_ignoredomain. at SHLIBEXT@
> 	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) domain. at SHLIBEXT@ trustdomain. at SHLIBEXT@ ntdomain. at SHLIBEXT@
> 	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) builtin. at SHLIBEXT@ guest. at SHLIBEXT@ fixed_challenge. at SHLIBEXT@ name_to_ntstatus. at SHLIBEXT@
> 	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(NSSINFOLIBDIR) ../idmap/ad. at SHLIBEXT@ rfc2307. at SHLIBEXT@ sfu. at SHLIBEXT@ sfu20. at SHLIBEXT@
> 
> installscripts: installdirs
> 	@$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS_BIN) $(DESTDIR)$(BINDIR) $(SCRIPTS)
> 
> installdat: installdirs
> 	@$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR) $(CODEPAGEDIR) $(srcdir)
> 
> installmsg: installdirs
> 	@$(SHELL) $(srcdir)/script/installmsg.sh $(DESTDIR) $(CODEPAGEDIR) $(srcdir)
> 
> installswat: installdirs installmsg
> 	@$(SHELL) $(srcdir)/script/installswat.sh $(DESTDIR) $(SWATDIR) $(srcdir)
> 
> installclientlib: installdirs libsmbclient
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
> 	-$(INSTALLLIBCMD_SH) bin/libsmbclient. at SHLIBEXT@ $(DESTDIR)$(LIBDIR)
> 	-$(INSTALLLIBCMD_A) bin/libsmbclient.a $(DESTDIR)$(LIBDIR)
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) ${prefix}/include
> 	-$(INSTALLCMD) -m $(INSTALLPERMS_DATA) $(srcdir)/include/libsmbclient.h $(DESTDIR)${prefix}/include
> 
> installlibtalloc: installdirs libtalloc
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
> 	-$(INSTALLLIBCMD_SH) $(LIBTALLOC_SHARED_TARGET) $(DESTDIR)$(LIBDIR)
> 	-$(INSTALLLIBCMD_A) $(LIBTALLOC_STATIC_TARGET) $(DESTDIR)$(LIBDIR)
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) ${prefix}/include
> 	-$(INSTALLCMD) -m $(INSTALLPERMS_DATA) $(LIBTALLOC_HEADERS) $(DESTDIR)${prefix}/include
> 
> installlibtdb: installdirs libtdb
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
> 	-$(INSTALLLIBCMD_SH) $(LIBTDB_SHARED_TARGET) $(DESTDIR)$(LIBDIR)
> 	-$(INSTALLLIBCMD_A) $(LIBTDB_STATIC_TARGET) $(DESTDIR)$(LIBDIR)
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) ${prefix}/include
> 	-$(INSTALLCMD) -m $(INSTALLPERMS_DATA) $(LIBTDB_HEADERS) $(DESTDIR)${prefix}/include
> 
> installlibsmbsharemodes: installdirs libsmbsharemodes
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
> 	-$(INSTALLLIBCMD_SH) bin/libsmbsharemodes. at SHLIBEXT@ $(DESTDIR)$(LIBDIR)
> 	-$(INSTALLLIBCMD_A) bin/libsmbsharemodes.a $(DESTDIR)$(LIBDIR)
> 	-$(INSTALLCMD) -m $(INSTALLPERMS_DATA) $(srcdir)/include/smb_share_modes.h $(DESTDIR)${prefix}/include
> 
> installlibaddns: installdirs libaddns
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
> 	-$(INSTALLLIBCMD_SH) bin/libaddns. at SHLIBEXT@ $(DESTDIR)$(LIBDIR)
> 	-$(INSTALLLIBCMD_A) bin/libaddns.a $(DESTDIR)$(LIBDIR)
> 
> installlibwbclient: installdirs libwbclient
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
> 	-$(INSTALLLIBCMD_SH) bin/libwbclient. at SHLIBEXT@ $(DESTDIR)$(LIBDIR)
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) ${prefix}/include
> 	-$(INSTALLCMD) -m $(INSTALLPERMS_DATA) $(srcdir)/nsswitch/libwbclient/wbclient.h $(DESTDIR)${prefix}/include
> 
> installlibnetapi: installdirs libnetapi
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
> 	-$(INSTALLLIBCMD_SH) $(LIBNETAPI_SHARED_TARGET) $(DESTDIR)$(LIBDIR)
> 	-$(INSTALLLIBCMD_A) $(LIBNETAPI_STATIC_TARGET) $(DESTDIR)$(LIBDIR)
> 	-$(INSTALLCMD) -m $(INSTALLPERMS_DATA) $(srcdir)/lib/netapi/netapi.h $(DESTDIR)${prefix}/include
> 
> installpammodules: $(PAM_MODULES)
> 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(PAMMODULESDIR)
> 	@for module in $(PAM_MODULES); do \
> 		echo "Installing module $${module} as $(DESTDIR)/$(PAMMODULESDIR)/$${module}. at SHLIBEXT@ "; \
> 		$(INSTALLCMD) -m $(INSTALLPERMS_BIN) bin/$${module}. at SHLIBEXT@ \
> 			"$(DESTDIR)/$(PAMMODULESDIR)"; \
> 	done
> 
> # revert to the previously installed version
> revert:
> 	@$(SHELL) $(srcdir)/script/revert.sh $(SBINDIR) $(SBIN_PROGS)
> 	@$(SHELL) $(srcdir)/script/revert.sh $(BINDIR) $(BIN_PROGS) $(SCRIPTS)
> 
> installman: installdirs
> 	@$(SHELL) $(srcdir)/script/installman.sh $(DESTDIR)$(MANDIR) $(srcdir) C "@ROFF@"
> 
> .PHONY: showlayout
> 
> showlayout:
> 	@echo "Samba will be installed into:"
> 	@echo "  prefix:      $(prefix)"
> 	@echo "  bindir:      $(BINDIR)"
> 	@echo "  sbindir:     $(SBINDIR)"
> 	@echo "  libdir:      $(LIBDIR)"
> 	@echo "  vardir:      $(VARDIR)"
> 	@echo "  mandir:      $(MANDIR)"
> 	@echo "  privatedir:  $(PRIVATE_DIR)"
> 	@echo "  configdir:   $(CONFIGDIR)"
> 	@echo "  lockdir:     $(LOCKDIR)"
> 	@echo "  piddir:      $(PIDDIR)"
> 	@echo "  swatdir:     $(SWATDIR)"
> 
> 
> uninstall: uninstallman uninstallservers uninstallbin @UNINSTALL_CIFSMOUNT@ @UNINSTALL_CIFSSPNEGO@ uninstallscripts uninstalldat uninstallswat uninstallmodules uninstalllibtalloc uninstalllibtdb @UNINSTALL_LIBSMBCLIENT@ @UNINSTALL_PAM_MODULES@ @UNINSTALL_LIBSMBSHAREMODES@ uninstalllibnetapi
> 
> uninstallman:
> 	@$(SHELL) $(srcdir)/script/uninstallman.sh $(DESTDIR)$(MANDIR) $(srcdir) C
> 
> uninstallservers:
> 	@$(SHELL) script/uninstallbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(SBINDIR) $(SBIN_PROGS)
> 
> uninstallbin:
> 	@$(SHELL) script/uninstallbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(BINDIR) $(BIN_PROGS)
> 
> uninstallcifsmount:
> 	@$(SHELL) script/uninstallbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(ROOTSBINDIR) @CIFSMOUNT_PROGS@
> 
> uninstallcifsspnego:
> 	@$(SHELL) script/uninstallbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(ROOTSBINDIR) @CIFSSPNEGO_PROGS@
> 
> uninstallmodules:
> 	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(VFSLIBDIR) $(VFS_MODULES)
> 	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(PDBLIBDIR) $(PDB_MODULES)
> 	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(RPCLIBDIR) $(RPC_MODULES)
> 	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(IDMAPLIBDIR) $(IDMAP_MODULES)
> 	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(CHARSETLIBDIR) $(CHARSET_MODULES)
> 	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(AUTHLIBDIR) $(AUTH_MODULES)
> 
> uninstallscripts:
> 	@$(SHELL) $(srcdir)/script/uninstallscripts.sh $(INSTALLPERMS_BIN) $(DESTDIR)$(BINDIR) $(SCRIPTS)
> 
> uninstalldat:
> 	@$(SHELL) $(srcdir)/script/uninstalldat.sh $(DESTDIR) $(LIBDIR) $(srcdir)
> 
> uninstallmsg:
> 	@$(SHELL) $(srcdir)/script/uninstallmsg.sh $(DESTDIR) $(LIBDIR) $(srcdir)
> 
> uninstallswat: uninstallmsg
> 	@$(SHELL) $(srcdir)/script/uninstallswat.sh $(DESTDIR) $(SWATDIR) $(srcdir)
> 
> uninstallclientlib:
> 	-$(UNINSTALLLIBCMD_SH) $(DESTDIR)$(LIBDIR)/libsmbclient. at SHLIBEXT@
> 	-$(UNINSTALLLIBCMD_A) $(DESTDIR)$(LIBDIR)/libsmbclient.a
> 	-rm -f $(DESTDIR)${prefix}/include/libsmbclient.h
> 
> uninstalllibsmbsharemodes:
> 	-$(UNINSTALLLIBCMD_SH) $(DESTDIR)$(LIBDIR)/libsmbsharemodes. at SHLIBEXT@
> 	-$(UNINSTALLLIBCMD_A) $(DESTDIR)$(LIBDIR)/libsmbsharemodes.a
> 
> uninstalllibaddns:
> 	-$(UNINSTALLLIBCMD_SH) $(DESTDIR)$(LIBDIR)/libaddns. at SHLIBEXT@
> 	-$(UNINSTALLLIBCMD_A) $(DESTDIR)$(LIBDIR)/libaddns.a
> 
> uninstalllibnetapi:
> 	-$(UNINSTALLLIBCMD_SH) $(DESTDIR)$(LIBDIR)/libnetapi. at SHLIBEXT@
> 	-$(UNINSTALLLIBCMD_A) $(DESTDIR)$(LIBDIR)/libnetapi.a
> 	-rm -f $(DESTDIR)${prefix}/include/netapi.h
> 
> uninstallpammodules:
> 	@for module in $(PAM_MODULES); do \
> 		echo "Removing $(DESTDIR)/$(PAMMODULESDIR)/$${module}. at SHLIBEXT@ "; \
> 		rm -f "$(DESTDIR)/$(PAMMODULESDIR)/$${module}. at SHLIBEXT@"; \
> 	done
> 
> # Toplevel clean files
> TOPFILES=dynconfig.o
> 
> clean: delheaders 
> 	-rm -f $(PRECOMPILED_HEADER)
> 	-rm -f core */*~ *~ \
> 		*/*.o */*/*.o */*/*/*.o \
> 		../testsuite/*/*.o \
> 		*/*. at SHLIBEXT@ */*/*. at SHLIBEXT@ */*/*/*. at SHLIBEXT@ \
> 		$(TOPFILES) $(BIN_PROGS) $(SBIN_PROGS) $(ROOT_SBIN_PROGS) \
> 		$(MODULES) $(TORTURE_PROGS) \
> 		$(LIBTALLOC) $(LIBSMBCLIENT) $(LIBADDNS) \
> 		$(LIBSMBSHAREMODES) $(EVERYTHING_PROGS) $(LIBNETAPI) \
> 		bin/libwbclient.so.0 bin/timelimit \
> 		.headers.stamp */src/*.o proto_exists \
> 		$(LIBTALLOC_SYMS) $(LIBWBCLIENT_SYMS) $(LIBTDB_SYMS) $(LIBNETAPI_SYMS)
> 	-rm -rf t_dir
> 
> # Making this target will just make sure that the prototype files
> # exist, not necessarily that they are up to date.  Since they're
> # removed by "make clean" this will always be run when you do anything
> # afterwards.
> proto_exists: include/proto.h include/build_env.h \
> 	winbindd/winbindd_proto.h web/swat_proto.h \
> 	libnet/libnet_proto.h \
> 	client/client_proto.h utils/net_proto.h utils/ntlm_auth_proto.h smbd/build_options.c
> 	@touch proto_exists
> 
> delheaders:
> 	@echo Removing prototype headers
> 	@rm -f include/proto.h include/build_env.h \
> 		winbindd/winbindd_proto.h web/swat_proto.h \
> 		client/client_proto.h utils/net_proto.h \
> 		smbd/build_options.c utils/ntlm_auth_proto.h \
> 		utils/passwd_proto.h libnet/libnet_proto.h
> 
> MKPROTO_SH = $(srcdir)/script/mkproto.sh
> 
> include/proto.h: smbd/build_options.c
> 	@echo Building include/proto.h
> 	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
> 	  -h _PROTO_H_ $(builddir)/include/proto.h \
> 	  $(PROTO_OBJ)
> 
> include/build_env.h: script/build_env.sh
> 	@echo Building include/build_env.h
> 	@$(SHELL) $(srcdir)/script/build_env.sh $(srcdir) $(builddir) $(CC) \
> 	  > $(builddir)/include/build_env.h
> 
> winbindd/winbindd_proto.h:
> 	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
> 	  -h _WINBINDD_PROTO_H_ $(builddir)/winbindd/winbindd_proto.h \
> 	  $(WINBINDD_OBJ1)
> 
> web/swat_proto.h:
> 	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
> 	  -h _SWAT_PROTO_H_ $(builddir)/web/swat_proto.h \
> 	  $(SWAT_OBJ1)
> 
> client/client_proto.h:
> 	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
> 	  -h _CLIENT_PROTO_H_ $(builddir)/client/client_proto.h \
> 	  $(CLIENT_OBJ1)
> 
> utils/net_proto.h:
> 	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
> 	  -h _NET_PROTO_H_ $(builddir)/utils/net_proto.h \
> 	  $(NET_OBJ1)
> 
> utils/passwd_proto.h:
> 	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
> 	  -h _PASSWD_PROTO_H_ $(builddir)/utils/passwd_proto.h \
> 	  $(PASSWD_UTIL_OBJ)
> 
> utils/ntlm_auth_proto.h:
> 	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
> 	  -h _NTLM_AUTH_PROTO_H_ $(builddir)/utils/ntlm_auth_proto.h \
> 	  $(NTLM_AUTH_OBJ1)
> 
> libnet/libnet_proto.h:
> 	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
> 	  -h _LIBNET_PROTO_H_ $(builddir)/libnet/libnet_proto.h \
> 	  $(LIBNET_OBJ)
> 
> # "make headers" or "make proto" calls a subshell because we need to
> # make sure these commands are executed in sequence even for a
> # parallel make.
> headers:
> 	$(MAKE) delheaders; \
> 	$(MAKE) smbd/build_options.c; \
> 	$(MAKE) include/proto.h; \
> 	$(MAKE) include/build_env.h; \
> 	$(MAKE) winbindd/winbindd_proto.h; \
> 	$(MAKE) web/swat_proto.h; \
> 	$(MAKE) client/client_proto.h; \
> 	$(MAKE) utils/ntlm_auth_proto.h; \
> 	$(MAKE) utils/net_proto.h; \
> 	$(MAKE) utils/passwd_proto.h; \
> 	$(MAKE) libnet/libnet_proto.h;
> 
> proto: headers
> 
> .PHONY: headers proto
> 
> etags:
> 	etags `find $(srcdir) -name "*.[ch]" | grep -v /.svn/`
> 
> ctags:
> 	ctags `find $(srcdir) -name "*.[ch]" | grep -v /.svn/`
> 
> realclean: clean delheaders
> 	-rm -f config.log bin/.dummy script/findsmb script/gen-8bit-gap.sh
> 	-rm -f script/installbin.sh script/uninstallbin.sh
> 
> distclean: realclean
> 	-rm -f smbadduser
> 	-rm -f include/config.h Makefile
> 	-rm -f config.status config.cache so_locations
> 	-rm -rf .deps TAGS
> 
> realdistclean: distclean
> 	-rm -f include/config.h.in
> 	-rm -f include/version.h
> 	-rm -f configure
> 
> # this target is really just for my use. It only works on a limited
> # range of machines and is used to produce a list of potentially
> # dead (ie. unused) functions in the code. (tridge)
> finddead:
> 	nm */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
> 	nm */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
> 	comm -13 nmused.txt nmfns.txt
> 
> 
> # when configure.in is updated, reconfigure
> $(srcdir)/configure: $(srcdir)/configure.in
> 	@echo "WARNING: you need to rerun ./autogen.sh"
> 
> config.status: $(srcdir)/configure
> 	@echo "WARNING: you need to run ./configure"
> 
> Makefile: $(srcdir)/Makefile.in config.status
> 	@echo "WARNING: you need to run ./config.status"
> 
> ######################################################################
> # Samba Testing Framework
> 
> # Check shared libs for unresolved symbols
> test_shlibs: $(SHLIBS)
> 	@echo "Testing $(SHLIBS) "
> 	@export $(LIB_PATH_VAR)=./bin && \
> 	for module in $(SHLIBS); do \
> 		./script/tests/dlopen.sh bin/$${module}. at SHLIBEXT@ \
> 			|| exit 1; \
> 	done
> 
> # Check for NSS module problems.
> test_nss_modules: nss_modules
> 	@echo "Testing $(NSS_MODULES) "
> 	@export $(LIB_PATH_VAR)=./bin && \
> 	for module in $(NSS_MODULES); do \
> 		./script/tests/dlopen.sh $${module} \
> 			|| exit 1; \
> 	done
> 
> # Check for PAM module problems.  Specifically, check that every module we
> # built can actually be loaded by a minimal PAM-aware application.
> test_pam_modules: pam_modules
> 	@echo "Testing $(PAM_MODULES) "
> 	@export $(LIB_PATH_VAR)=./bin && \
> 	for module in $(PAM_MODULES); do \
> 		./script/tests/dlopen.sh -lpam -ldl bin/$${module}. at SHLIBEXT@ \
> 			|| exit 1; \
> 	done
> 
> 
> ##
> ## Targets for 'make test'
> ##
> test: all torture timelimit
> 	@echo Running Test suite
> 	@LIB_PATH_VAR=$(LIB_PATH_VAR) PERL="$(PERL)" $(srcdir)/script/tests/selftest.sh ${selftest_prefix} all "${smbtorture4_path}"
> 
> valgrindtest: all torture timelimit
> 	@echo Running Test suite with valgrind
> 	@LIB_PATH_VAR=$(LIB_PATH_VAR) \
> 	 NMBD_VALGRIND="xterm -n nmbd -e valgrind -q --db-attach=yes --num-callers=30" \
> 	 WINBINDD_VALGRIND="xterm -n winbindd -e valgrind -q --db-attach=yes --num-callers=30" \
> 	 SMBD_VALGRIND="xterm -n smbd -e valgrind -q --db-attach=yes --num-callers=30" \
> 	 VALGRIND="valgrind -q --num-callers=30 --log-file=${selftest_prefix}/valgrind.log" \
> 	 PERL="$(PERL)" $(srcdir)/script/tests/selftest.sh ${selftest_prefix} all "${smbtorture4_path}"




-- 

i.A. Michael Adam

-- 
Michael Adam <ma at sernet.de>
SerNet GmbH, Bahnhofsallee 1b, 37081 Göttingen
phone: +49-551-370000-0, fax: +49-551-370000-9
AG Göttingen, HRB 2816, GF: Dr. Johannes Loxen
http://www.SerNet.DE, mailto: Info @ SerNet.DE
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 206 bytes
Desc: not available
Url : http://lists.samba.org/archive/samba-technical/attachments/20080715/bb0e827b/attachment.bin