SWAT problem in Samba 3.*

[lipson]

Dennis Clarke-2 wrote:
> 
> 
>>
>> Hi all,
>>
>>      Recently there are still some problems about Samba configuration and
>> installation. After compiling and installation with commands "make" and
>> "make install". I crafted the smb startup script in /etc/init.d/. And I
>> found that I have to export LD_LIBRARY_PATH explicitly in start()
>> function
>> to make it run. Otherwise, the smbd and nmbd services could not locate
>> their shared libraries in /usr/local/samba/lib/.
> 
> What OS are you doing this with ?
> 
> What compiler did you use ?
> 
> Is this Samba 3.0.32 or 3.2.2 or what ?
> 
> Because no way should you need LD_LIBRARY_PATH set. I used out of the box
> procedures with nothing fancy and it all just works for me.
> 
> Thus :
> 
> root at aequitas:~# uname -a
> SunOS aequitas 5.11 snv_95 i86pc i386 i86pc
> root at aequitas:~# /bin/echo $LD_LIBRARY_PATH
> 
> root at aequitas:~# ldd /opt/csw/sbin/smbd
>         libthread.so.1 =>        /lib/libthread.so.1
>         libldap-2.3.so.0 =>      /opt/csw/lib/i386/libldap-2.3.so.0
>         liblber-2.3.so.0 =>      /opt/csw/lib/i386/liblber-2.3.so.0
>         libpam.so.1 =>   /lib/libpam.so.1
>         libsec.so.1 =>   /lib/libsec.so.1
>         libsendfile.so.1 =>      /lib/libsendfile.so.1
>         libresolv.so.2 =>        /lib/libresolv.so.2
>         libdl.so.1 =>    /lib/libdl.so.1
>         libnsl.so.1 =>   /lib/libnsl.so.1
>         libsocket.so.1 =>        /lib/libsocket.so.1
>         libiconv.so.2 =>         /opt/csw/lib/i386/libiconv.so.2
>         libpopt.so.0 =>  /opt/csw/lib/i386/libpopt.so.0
>         libtalloc.so.1 =>        /opt/csw/lib/i386/libtalloc.so.1
>         libtdb.so.1 =>   /opt/csw/lib/i386/libtdb.so.1
>         libwbclient.so.0 =>      /opt/csw/lib/i386/libwbclient.so.0
>         libc.so.1 =>     /lib/libc.so.1
>         libgen.so.1 =>   /lib/libgen.so.1
>         libnet.so =>     /opt/csw/lib/i386/libnet.so
>         libsasl2.so.2 =>         /opt/csw/lib/i386/libsasl2.so.2
>         libssl.so.0.9.8 =>       /opt/csw/lib/i386/libssl.so.0.9.8
>         libcrypto.so.0.9.8 =>    /opt/csw/lib/i386/libcrypto.so.0.9.8
>         libavl.so.1 =>   /lib/libavl.so.1
>         libidmap.so.1 =>         /usr/lib/libidmap.so.1
>         libmp.so.2 =>    /lib/libmp.so.2
>         libmd.so.1 =>    /lib/libmd.so.1
>         libscf.so.1 =>   /lib/libscf.so.1
>         libintl.so.3 =>  /opt/csw/lib/libintl.so.3
>         libldap.so.5 =>  /usr/lib/libldap.so.5
>         libsldap.so.1 =>         /usr/lib/libsldap.so.1
>         libuutil.so.1 =>         /lib/libuutil.so.1
>         libsasl.so.1 =>  /usr/lib/libsasl.so.1
>         libnspr4.so =>   /usr/lib/mps/libnspr4.so
>         libplc4.so =>    /usr/lib/mps/libplc4.so
>         libnss3.so =>    /usr/lib/mps/libnss3.so
>         libssl3.so =>    /usr/lib/mps/libssl3.so
>         libpthread.so.1 =>       /lib/libpthread.so.1
>         librt.so.1 =>    /lib/librt.so.1
>         libsoftokn3.so =>        /usr/lib/mps/libsoftokn3.so
>         libplds4.so =>   /usr/lib/mps/libplds4.so
>         libbsm.so.1 =>   /lib/libbsm.so.1
>         libsecdb.so.1 =>         /lib/libsecdb.so.1
>         libtsol.so.2 =>  /lib/libtsol.so.2
>         libinetutil.so.1 =>      /lib/libinetutil.so.1
>         libm.so.2 =>     /lib/libm.so.2
> root at aequitas:~#
> 
> Dennis Clarke
> http://www.blastwave.org
> 
> 
> 


Thanks to your remind. I guess the default lib directory for my system is
/usr/lib64/. And unfortunately the "make install" command did not copy
necessary libraries to that directory. So while I started up the smb
services, the service could not locate its libs unless I explicitly
specified in /etc/init.d/smb startup scripts. 
And when I copied the libs to /usr/lib64, everything worked fine. 


-- 
View this message in context: http://www.nabble.com/Re%3A-SWAT-problem-in-Samba-3.*-tp19174304p19174399.html
Sent from the Samba - samba-technical mailing list archive at Nabble.com.