Cannot get net ads join to work under Solaris 8

[Clive.Elsum at csiro.au]

Many thanks Andrew!! 

Setting the Solaris box to GMT certainly did the trick.
Well done, I appreciate the prompt response to my query.

Clive Elsum

-----Original Message-----
From: Andrew Bartlett [mailto:abartlet at samba.org]
Sent: Thursday, 14 November 2002 10:19 PM
To: Clive.Elsum at csiro.au
Cc: samba-technical at lists.samba.org
Subject: Re: Cannot get net ads join to work under Solaris 8


On Thu, 2002-11-14 at 21:30, Clive.Elsum at csiro.au wrote:
> HI,
> 
> Any clues would be appreciated in getting net ads join working on Solaris
8.
> I have downloaded the latest CVS samba 3.0. on to a solaris 8 box as is.
> I have followed the same procedures as the LINUX CVS port that I have got
> going.
> The only mod needed was that the  --without-sendfile flag did not appear
to
> work so I put in with-sendfile=no in configure rather that the default yes
> for the Solaris port. This was not necessary for the Linux port.
> 
> Clocks on the machines are synchronized.
> kdestroy works correctly
> kinit works correctly
> klist works correctly
> net ads join fails for the Solaris port but works for the Linux port,
errors
> reported below.
> 
> root#l ./net ads join -Uadminuser
> [2002/11/14 21:01:07, 0] lib/charcnv.c:init_iconv(93)
>   Conversion from UCS-2LE to CP850 not supported
> [2002/11/14 21:01:07, 0] lib/charcnv.c:init_iconv(93)
>   Conversion from UTF8 to CP850 not supported
> [2002/11/14 21:01:07, 0] lib/charcnv.c:init_iconv(93)
>   Conversion from ASCII to CP850 not supported
> [2002/11/14 21:01:07, 0] lib/charcnv.c:init_iconv(93)
>   Conversion from CP850 to UCS-2LE not supported
> [2002/11/14 21:01:07, 0] lib/charcnv.c:init_iconv(93)
>   Conversion from CP850 to UTF8 not supported
> [2002/11/14 21:01:07, 0] lib/charcnv.c:init_iconv(93)
>   Conversion from CP850 to ASCII not supported
> [2002/11/14 21:01:07, 0] lib/charcnv.c:init_iconv(93)
>   Conversion from CP850 to UTF8 not supported
> [2002/11/14 21:01:07, 0] lib/charcnv.c:init_iconv(93)
>   Conversion from UTF8 to CP850 not supported
> adminuser password: 
> [2002/11/14 21:01:11, 1] libsmb/clikrb5.c:krb5_mk_req2(63)
>   krb5_get_credentials failed for w2kads$@OUR.DOMAIN.AU (Clock skew too
> great in KDC reply)

Can you try putting the Solaris machine in the GMT timezone?

My thinking is that the gmtime() replacement might not be functioning
correctly.

Andrew Bartlett

-- 
Andrew Bartlett                                 abartlet at pcug.org.au
Manager, Authentication Subsystems, Samba Team  abartlet at samba.org
Student Network Administrator, Hawker College   abartlet at hawkerc.net
http://samba.org     http://build.samba.org     http://hawkerc.net