R: Network path not found

[Pranay Tembhekar]

Hi,

Try to do one thing...add that computers entry into the hosts file...it should
work...!!!

Regards,

Pranay




PINTO ELIA wrote:

> The wins server is correct? Is it the same on client? which client (samba or
> Windows)             ?
>
> I think is a name risolution problem. From a win2000 or Nt client do:
>
> ping <netbiosname> or net view \\<netbiosname. If it fail do
>
> net view \\ <file://\\<> <Ip address>
>
> If the wins server is correct (nmblookup -A <ipaddress win server> <netbios
> name>) do on the linux box:
>
> nmblookup -A 127.0.0.1 __SAMBA__
>
>
> If this fail nmb is not running. And so on....
>
> Hope this help
>
>
>
>
>
> -----Messaggio originale-----
> Da: Ramy Tatad [mailto:rat at cybees.com]
> Inviato: giovedì 18 aprile 2002 10.55
> A: samba-technical at lists.samba.org
> Oggetto: Network path not found
>
> Samba ppl,
>
>      I set-up a samba server and it errors this command when connecting:
> "Network path not found"
>
> Here is the settings of my samba server...
> OS: Redhat v7.1
> Samba: v2.07 or v2.22
>
> The diff between this new server to my other servers is that this one cannot
> change its partition table from linux to "linux extended". Is there any
> problem with that.. since all the possible parameters on smb.conf was
> already tried. I also check if the server can access internet and its also
> fine...
>
> Attach here is the sample samba configurations I used.
>
> Please help me.. Thanks,
>
> RAM