File corruption with loglevel 0

[Dmitry Melekhov]

Hello!

I'm shure that problem is in the same place, where was
"Invalid packet length" problem.

As I wrote I still can't copy files from w2k to samba( today CVS).

Wire connection and Windows reinstallation senior engineer
Dmitry Melekhov
http://www.belkam.com/~dm
2:5050/11.23 at fidonet


----- Original Message ----- 
From: Juergen Hasch <hasch at flo.sh.bosch.de>
To: <samba-technical at lists.samba.org>
Sent: Friday, May 25, 2001 6:09 PM
Subject: Re: File corruption with loglevel 0


> 
> 
> Juergen Hasch schrieb:
> > 
> > I have very strange things happening to me using the current Samba
> > 2.2 CVS. When I set the log level to 0 all files created/copied on a
> > Samba share only contain zeroes. Increasing the log level to
> > at least 1 makes it work again.
> > 
> > Any hints what could cause this behaviour ?
> 
> Corruption happens on both i386-Linux and Sparc-Solaris using the
> current
> 2.2 CVS. The 2.2.0 release version works OK. Client is an NT 4 SP6 box.
> 
> On the Solaris machine I can switch between no corruption at log level
> 10
> and corruption at log level 0.
> 
> Typically I copy a file to the Samba share and it only contains zeroes.
> Copying it over a second time, it has the correct contents.
> 
> ...Juergen
> 
>