Samba 2.2
Jamie Hall
Hallj at axl.ca
Wed Jun 6 13:46:07 GMT 2001
Tried to include the core file, but report was rejected, over 40K. The core file is only 25K.
Are you interested in a problem that I had with the 2.2 version of samba, downloaded from www.bull.de/pub? It installed fine on RS/6000 F50 AIX 4.3.3-06, but I get occasional core dumps. I have gone back to 2.07. But I also have another 2.2 install on a very similar system which has not had any of these problems. Attached: core file, log file, smb.conf, AIX error report. JH.
CONFIDENTIAL
If you are not the intended recipient of this document, any disclosure, copying, distribution or other use is prohibited and may be illegal. Please notify sender immediately if you have received this document in error.
Thank you.
-------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
; workgroup = SUPPORT
debug level = 1
; syslog = 0
workgroup = AXL
# server string is the equivalent of the NT Description field
server string = Samba Server on elmo
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
printing = aix
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
guest account = nobody
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/samba/log/%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
; security = share
# Use password server option only with security = server
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
; encrypt passwords = no
# If the following this parameter is set to "yes" (it defaults to "no") and
# an smbpasswd file exists containing all the valid users of a Samba system
# but no encrypted passwords (ie. the Lanman hash and NT hash entries in the
# file are set to "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"), then as users log in
# with plaintext passwords that are matched against their UNIX password
# entries, their plaintext passwords will be hashed and entered into the
# smbpasswd file.
#
update encrypted = yes
# Unix users can map to different SMB User names
; username map = /etc/smbusers
; username map = /var/samba/users.map
map to guest = Bad User
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /usr/local/lib/smb.conf.%m
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
; path = /usr/spool/samba
path = /tmp
browseable = yes
# Set public = yes to allow user 'guest account' to print
guest ok = yes
writable = no
printable = yes
# qbpaupld
[qbpaupld]
comment = qbytepa upload
valid users = hallj, williar, coombsd, restat, kerrd, vergieh
path = /qbpaupld
inherit permissions = yes
read only = no
-------------- next part --------------
[2001/05/31 11:38:57, 1] smbd/password.c:pass_check_smb(526)
Couldn't find user 'olearyp' in UNIX password database.
[2001/05/31 11:38:57, 1] smbd/password.c:pass_check_smb(526)
Couldn't find user 'olearyp' in UNIX password database.
[2001/05/31 11:38:57, 0] lib/fault.c:fault_report(40)
===============================================================
[2001/05/31 11:38:57, 0] lib/fault.c:fault_report(41)
INTERNAL ERROR: Signal 11 in pid 15422 (2.2.0)
Please read the file BUGS.txt in the distribution
[2001/05/31 11:38:57, 0] lib/fault.c:fault_report(43)
===============================================================
[2001/05/31 11:38:57, 0] lib/util.c:smb_panic(1139)
PANIC: internal error
[2001/05/31 11:38:59, 1] smbd/password.c:pass_check_smb(526)
Couldn't find user 'olearyp' in UNIX password database.
[2001/05/31 11:38:59, 1] smbd/password.c:pass_check_smb(526)
Couldn't find user 'olearyp' in UNIX password database.
[2001/05/31 11:38:59, 1] smbd/ipc.c:api_fd_reply(292)
api_fd_reply: INVALID PIPE HANDLE: 700f
[2001/05/31 11:39:04, 0] lib/fault.c:fault_report(40)
===============================================================
[2001/05/31 11:39:04, 0] lib/fault.c:fault_report(41)
INTERNAL ERROR: Signal 11 in pid 31708 (2.2.0)
Please read the file BUGS.txt in the distribution
[2001/05/31 11:39:04, 0] lib/fault.c:fault_report(43)
===============================================================
[2001/05/31 11:39:04, 0] lib/util.c:smb_panic(1139)
PANIC: internal error
[2001/05/31 11:39:06, 1] smbd/password.c:pass_check_smb(526)
Couldn't find user 'olearyp' in UNIX password database.
[2001/05/31 11:39:06, 1] smbd/password.c:pass_check_smb(526)
Couldn't find user 'olearyp' in UNIX password database.
[2001/05/31 11:39:06, 1] smbd/ipc.c:api_fd_reply(292)
api_fd_reply: INVALID PIPE HANDLE: 7024
[2001/05/31 11:39:08, 0] lib/fault.c:fault_report(40)
===============================================================
[2001/05/31 11:39:08, 0] lib/fault.c:fault_report(41)
INTERNAL ERROR: Signal 11 in pid 36586 (2.2.0)
Please read the file BUGS.txt in the distribution
[2001/05/31 11:39:08, 0] lib/fault.c:fault_report(43)
===============================================================
[2001/05/31 11:39:08, 0] lib/util.c:smb_panic(1139)
PANIC: internal error
[2001/05/31 11:39:09, 1] smbd/password.c:pass_check_smb(526)
Couldn't find user 'olearyp' in UNIX password database.
[2001/05/31 11:39:09, 1] smbd/password.c:pass_check_smb(526)
Couldn't find user 'olearyp' in UNIX password database.
[2001/05/31 11:39:09, 1] smbd/ipc.c:api_fd_reply(292)
api_fd_reply: INVALID PIPE HANDLE: 7016
[2001/05/31 11:39:11, 0] lib/fault.c:fault_report(40)
===============================================================
[2001/05/31 11:39:11, 0] lib/fault.c:fault_report(41)
INTERNAL ERROR: Signal 11 in pid 28790 (2.2.0)
Please read the file BUGS.txt in the distribution
[2001/05/31 11:39:11, 0] lib/fault.c:fault_report(43)
===============================================================
[2001/05/31 11:39:11, 0] lib/util.c:smb_panic(1139)
PANIC: internal error
[2001/05/31 11:39:13, 1] smbd/password.c:pass_check_smb(526)
Couldn't find user 'olearyp' in UNIX password database.
[2001/05/31 11:39:13, 1] smbd/password.c:pass_check_smb(526)
Couldn't find user 'olearyp' in UNIX password database.
[2001/05/31 11:39:13, 1] smbd/ipc.c:api_fd_reply(292)
api_fd_reply: INVALID PIPE HANDLE: 7009
-------------- next part --------------
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: C60BB505
Date/Time: Thu May 31 11:39:11
Sequence Number: 551
Machine Id: 006086364C00
Node Id: elmo
Class: S
Type: PERM
Resource Name: SYSPROC
Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED
Probable Causes
SOFTWARE PROGRAM
User Causes
USER GENERATED SIGNAL
Recommended Actions
CORRECT THEN RETRY
Failure Causes
SOFTWARE PROGRAM
Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE
Detail Data
SIGNAL NUMBER
6
USER'S PROCESS ID:
28790
FILE SYSTEM SERIAL NUMBER
8
INODE NUMBER
2
PROGRAM NAME
smbd
ADDITIONAL INFORMATION
raise 4C
??
abort B8
??
??
??
Symptom Data
REPORTABLE
1
INTERNAL ERROR
0
SYMPTOM CODE
PCSS/SPI2 FLDS/smbd SIG/6 FLDS/raise VALU/4c
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: C60BB505
Date/Time: Thu May 31 11:39:08
Sequence Number: 550
Machine Id: 006086364C00
Node Id: elmo
Class: S
Type: PERM
Resource Name: SYSPROC
Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED
Probable Causes
SOFTWARE PROGRAM
User Causes
USER GENERATED SIGNAL
Recommended Actions
CORRECT THEN RETRY
Failure Causes
SOFTWARE PROGRAM
Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE
Detail Data
SIGNAL NUMBER
6
USER'S PROCESS ID:
36586
FILE SYSTEM SERIAL NUMBER
8
INODE NUMBER
2
PROGRAM NAME
smbd
ADDITIONAL INFORMATION
raise 4C
??
abort B8
??
??
??
Symptom Data
REPORTABLE
1
INTERNAL ERROR
0
SYMPTOM CODE
PCSS/SPI2 FLDS/smbd SIG/6 FLDS/raise VALU/4c
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: C60BB505
Date/Time: Thu May 31 11:39:04
Sequence Number: 549
Machine Id: 006086364C00
Node Id: elmo
Class: S
Type: PERM
Resource Name: SYSPROC
Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED
Probable Causes
SOFTWARE PROGRAM
User Causes
USER GENERATED SIGNAL
Recommended Actions
CORRECT THEN RETRY
Failure Causes
SOFTWARE PROGRAM
Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE
Detail Data
SIGNAL NUMBER
6
USER'S PROCESS ID:
31708
FILE SYSTEM SERIAL NUMBER
8
INODE NUMBER
2
PROGRAM NAME
smbd
ADDITIONAL INFORMATION
raise 4C
??
abort B8
??
??
??
Symptom Data
REPORTABLE
1
INTERNAL ERROR
0
SYMPTOM CODE
PCSS/SPI2 FLDS/smbd SIG/6 FLDS/raise VALU/4c
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: C60BB505
Date/Time: Thu May 31 11:38:57
Sequence Number: 548
Machine Id: 006086364C00
Node Id: elmo
Class: S
Type: PERM
Resource Name: SYSPROC
Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED
Probable Causes
SOFTWARE PROGRAM
User Causes
USER GENERATED SIGNAL
Recommended Actions
CORRECT THEN RETRY
Failure Causes
SOFTWARE PROGRAM
Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE
Detail Data
SIGNAL NUMBER
6
USER'S PROCESS ID:
15422
FILE SYSTEM SERIAL NUMBER
8
INODE NUMBER
2
PROGRAM NAME
smbd
ADDITIONAL INFORMATION
raise 4C
??
abort B8
??
??
??
Symptom Data
REPORTABLE
1
INTERNAL ERROR
0
SYMPTOM CODE
PCSS/SPI2 FLDS/smbd SIG/6 FLDS/raise VALU/4c
---------------------------------------------------------------------------
More information about the samba-technical
mailing list