smbclient using all interfaces

[Tim Winders]

I'm confused.  I have the following lines in my smb.conf file (2.0.2,
btw):

interfaces = 206.76.17.2/255.255.255.0 206.76.20.2/255.255.255.0 206.76.21.2/255.255.255.0 206.76.22.2/255.255.255.0
bind interfaces only = Yes

The system also have an additional interface of 206.76.16.67/28.  If I
block TCP/UDP ports 137-139 on my router and then try to do

	smbclient -L another_host

I never get a response from the remote host.  When I look at the router
logs, I see that packets have been dropped on that router interface
because of the filter.  If I remove the filter on the router, everything
starts to work again.

So, does anybody have any thoughts as to why this is happening???

=== Tim

---------------------------------------------------------------------
|  Tim Winders, CNE, MCSE     |  Email:  Tim.Winders at SPC.cc.tx.us   |
|  Network Administrator      |  Phone:  806-894-9611 x 2369        |
|  South Plains College       |  Fax:    806-897-4711               |
|  Levelland, TX  79336       |                                     |
---------------------------------------------------------------------