Join Nt domain

[Helga Mayer]

On Thu, 26 Oct 2000, marketing wrote:

> Hi
> 
> 1) I'm using RH 6.2 and samba-2.0.6 and am trying to become a member of an
> NT
> domain (PDC is an NT 4.0 server called Prioris and the domain is called
> domain1). The net manager created for me an account using Server Manager for
> Domains. I joined the domain ok. After a while I had to reinstall RH 6.2 +
> samba and I tried to join the domain again (smbpasswd -r domain1 -j Prioris)
> but I got the messaje listed below. Does mean I don't have to join the
> domain every time I reinstall samba ???
> 
> added interface ip=193.230.230.37 bcast=193.230.230.255 nmask=255.255.255.0
> Got a positive name query response from 193.230.230.1 ( 193.230.230.1 )
> cli_net_auth2: Error NT_STATUS_ACCESS_DENIED
> cli_nt_setup_creds: auth2 challenge failed
> modify_trust_password: unable to setup the PDC credentials to machine
> PRIORIS. Error was : NT_STATUS_ACCESS_DENIED.
> 2000/10/25 17:32:39 : change_trust_account_password: Failed to change
> password for domain DOMAIN1.
> Unable to join DOMAIN1.

Use Server Manager on Prioris to delete the account for the linux box.
Then add a new account for the linux box.
Now you should be able to join DOMAIN1 by smbpasswd -jDOMAIN1.

Hope this helps

HM

> 
> 2) When trying to mount a service on a remote computer I get this:
> 
> added interface ip=193.230.230.37 bcast=193.230.230.255 nmask=255.255.255.0
> Got a positive name query response from 193.230.230.55 ( 193.230.230.55 )
> 
> session setup failed: ERRDOS - ERRnoaccess (Access denied.)
> What could be the reason ??? The win users can access my shares and do
> whatever I alowed them to do. What username do I have to provide when I'm
> prompted for it ??? Do I have to add smth. in my smb.conf file ????
> 
> HELP !!!!
> 
> Below there is listed my smb.conf
> 
> [global]
> 
>    netbios name = Dragoss
> # workgroup = NT-Domain-Name or Workgroup-Name
>    workgroup = domain1
> 
> # server string is the equivalent of the NT Description field
>    server string = Samba Server %v
> 
> # This option is important for security. It allows you to restrict
> # connections to machines which are on your local network. The
> # following example restricts access to two C class networks and
> # the "loopback" interface. For more examples of the syntax see
> # the smb.conf man page
> ;   hosts allow = 192.168.1. 192.168.2. 127.
> 
> # if you want to automatically load your printer list rather
> # than setting them up individually then you'll need this
>    printcap name = /etc/printcap
>    load printers = yes
> 
> # It should not be necessary to spell out the print system type unless
> # yours is non-standard. Currently supported print systems include:
> # bsd, sysv, plp, lprng, aix, hpux, qnx
>    printing = bsd
> 
> # Uncomment this if you want a guest account, you must add this to
> /etc/passwd
> # otherwise the user "nobody" is used
> ;  guest account = pcguest
> 
> # this tells Samba to use a separate log file for each machine
> # that connects
>    log file = /var/log/samba/samba.log
>    log level = 2
>    debug timestamp = yes
> 
> # Put a capping on the size of the log files (in Kb).
>    max log size = 50
> 
> # Security mode. Most people will want user level security. See
> # security_level.txt for details.
>    security = domain
> ;   domain logins = yes
> # Use password server option only with security = server
>    password server = Prioris
>    null passwords = yes
> 
> # Password Level allows matching of _n_ characters of the password for
> # all combinations of upper and lower case.
>   password level = 8
>   username level = 3
> 
> # You may wish to use password encryption. Please read
> # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
> # Do not enable this option unless you have read those documents
>   encrypt passwords = yes
>   smb passwd file = /etc/smbpasswd
> 
> # The following are needed to allow password changing from Windows to
> # update the Linux sytsem password also.
> # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
> # NOTE2: You do NOT need these to allow workstations to change only
> #        the encrypted SMB passwords. They allow the Unix password
> #        to be kept in sync with the SMB password.
> ;  unix password sync = Yes
> ;  passwd program = /usr/bin/passwd %u
> ;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
> *passwd:*all*authentication*tokens*updated*successfully*
> 
> # Unix users can map to different SMB User names
> ;  username map = /etc/smbusers
> 
> # Using the following line enables you to customise your configuration
> # on a per machine basis. The %m gets replaced with the netbios name
> # of the machine that is connecting
> ;   include = /etc/smb.conf.%m
> 
> # Most people will find that this option gives better performance.
> # See speed.txt and the manual pages for details
>    socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
> 
> # Configure remote browse list synchronisation here
> #  request announcement to, or browse list sync from:
> # a specific host or from / to a whole subnet (see below)
> ;   remote browse sync = 192.168.3.25 192.168.5.255
> # Cause this host to announce itself to local subnets here
> ;   remote announce = 192.168.1.255 192.168.2.44
> 
> # Browser Control Options:
> # set local master to no if you don't want Samba to become a master
> # browser on your network. Otherwise the normal election rules apply
>    local master = no
> 
> # OS Level determines the precedence of this server in master browser
> # elections. The default value should be reasonable
>    os level = 1
> 
> # Domain Master specifies Samba to be the Domain Master Browser. This
> # allows Samba to collate browse lists between subnets. Don't use this
> # if you already have a Windows NT domain controller doing this job
> ;   domain master = yes
> 
> # Preferred Master causes Samba to force a local browser election on startup
> # and gives it a slightly higher chance of winning the election
> ;   preferred master = yes
> 
> # Use only if you have an NT server on your network that has been
> # configured at install time to be a primary domain controller.
> ;   domain controller = Prioris
> #<NT-Domain-Controller-SMBName>
> 
> # Enable this if you want Samba to be a domain logon server for
> # Windows95 workstations.
> ;   domain logons = yes
> 
> # if you enable domain logons then you may want a per-machine or
> # per user logon script
> # run a specific logon batch file per workstation (machine)
> ;   logon script = %m.bat
> # run a specific logon batch file per username
> ;   logon script = %U.bat
> 
> # Where to store roving profiles (only for Win95 and WinNT)
> #        %L substitutes for this servers netbios name, %U is username
> #        You must uncomment the [Profiles] share below
> ;   logon path = \\%L\Profiles\%U
> 
> # All NetBIOS names must be resolved to IP Addresses
> # 'Name Resolve Order' allows the named resolution mechanism to be specified
> # the default order is "host lmhosts wins bcast". "host" means use the unix
> # system gethostbyname() function call that will use either /etc/hosts OR
> # DNS or NIS depending on the settings of /etc/host.config,
> /etc/nsswitch.conf
> # and the /etc/resolv.conf file. "host" therefore is system configuration
> # dependant. This parameter is most often of use to prevent DNS lookups
> # in order to resolve NetBIOS names to IP Addresses. Use with care!
> # The example below excludes use of name resolution for machines that are
> NOT
> # on the local network segment
> # - OR - are not deliberately to be known via lmhosts or via WINS.
> ; name resolve order = wins lmhosts bcast
> 
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable it's WINS
> Server
> ;   wins support = yes
> 
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
> ;   wins server = w.x.y.z
> 
> # WINS Proxy - Tells Samba to answer name resolution queries on
> # behalf of a non WINS capable client, for this to work there must be
> # at least one WINS Server on the network. The default is NO.
> ;   wins proxy = yes
> 
> # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
> # via DNS nslookups. The built-in default for versions 1.9.17 is yes,
> # this has been changed in version 1.9.18 to no.
>    dns proxy = no
> 
> # Case Preservation can be handy - system default is _no_
> # NOTE: These can be set on a per share basis
> ;  preserve case = no
> ;  short preserve case = no
> # Default case is normally upper case for all DOS files
> ;  default case = lower
> # Be very careful with case sensitivity - it can break things!
> ;  case sensitive = no
> 
> # Ce se face cu mesajele primite de la pop-up (masini windoze)
>    message command = /usr/bin/linpopup "%f" "%m" %s; rm %s
> 
> # Acces interzis pentru logare cu urmatorii useri
>      invalid users = bin daemon adm sync uucp sys shutdown halt mail news\
> operator gopher root
> 
> #======================== Share Definitions ========================
> [Retea]
>  path = /Ret/Retea/
>  comment = Hai Rapid
>  writeable = yes
>  write list = @domain1
>  follow symlinks = yes
>  map archive = no
>  map system = no
>  map hidden = no
>  delete readonly = yes
>  create mask = 777
>  directory mask = 777
>  read only = no
>  revalidate = no
> 
> 
> #[homes]
> ;   comment = Home Directories
> ;   browseable = no
> ;   writeable = yes
> ;   hide dot files = yes
> ;   follow symlinks = no
> ;   dont descend = Desktop .Kde .xauth
> ;   veto files = /.bash*/.emacs/.kderc/.screenrc/.Xauthority/
> 
> 
> 
>