Problems with recent Smaba-TNG CVS

Paul J Collins pjdc at eircom.net
Mon May 8 19:45:35 GMT 2000


I updated my CVS tree at approximately 18:30 GMT.  The build went
fine, but when I log in from my workstation, I am told that my roaming
profile could not be found, and that my local one will be used.  I OK
this and continue.  My home dir is not mapped, and when I attempt to
access it using the \\server\share notation, I am asked for username
and password.  Authentication fails.

When I log out and in again, I get the same roaming profile error, but
after I OK that, I am told that the domain is not available.

Tests using "ntlogin" in rpcclient succeed with no errors.

Looking in log.smb reveals that authentication for the account I was
attempting to use fails multiple times.  This is the same smbpasswd I
have been using for a while now.  Below is a sample of the kind of
info I get for a log in failure.

Am I doing something silly?

Paul.

--- BEGIN "log.smb" ---

cli_net_req_chal: LSA Request Challenge from \\. to STO-KERRIG: A3F59D2F48180793
make_q_req_chal: 542
make_q_req_chal: 552
000000 net_io_q_req_chal 
    0000 undoc_buffer: 00000001
    000004 smb_io_unistr2 logon_srv
        0004 uni_max_len: 00000004
        0008 undoc      : 00000000
        000c uni_str_len: 00000004
        0010 buffer     : \.\.....
    000018 smb_io_unistr2 logon_clnt
        0018 uni_max_len: 0000000b
        001c undoc      : 00000000
        0020 uni_str_len: 0000000b
        0024 buffer     : S.T.O.-.K.E.R.R.I.G...
    00003a smb_io_chal clnt_chal
        003a data: a3 f5 9d 2f 48 18 07 93 
rpc_con_pipe_req: op_num 4 offset 66 used: 66
rpc_api_pipe_req: start: 0 off: 66
create_rpc_request: opnum: 0x4 data_len: 0x30
create_rpc_request: data_len: 30 auth_len: 0 alloc_hint: 18
000000 smb_io_rpc_hdr hdr    
    0000 major     : 05
    0001 minor     : 00
    0002 pkt_type  : 00
    0003 flags     : 01
    0004 pack_type : 10 00 00 00 
prs_set_packtype: bigendian: No
    0008 frag_len  : 0030
    000a auth_len  : 0000
    000c call_id   : 00000097
000010 smb_io_rpc_hdr_req hdr_req
    0010 alloc_hint: 00000018
    0014 context_id: 0064
    0016 opnum     : 0004
frag_len: 0x30 data_len: 0x18 data_calc_len: 0x18
create_noauth_pdu: 95
create_noauth_pdu: 102
rpc_api_pipe_req: end: 24
ncalrpc_l_send_prs: data: 0x80a0bd0 len 48
[000] 05 00 00 01 10 00 00 00  30 00 00 00 97 00 00 00  ........ 0.......
[010] 18 00 00 00 64 00 04 00  01 00 00 00 04 00 00 00  ....d... ........
[020] 00 00 00 00 04 00 00 00  5C 00 5C 00 2E 00 00 00  ........ \.\.....
write_socket(14,48)
write_socket(14,48) wrote 48
rpc_api_pipe_req: start: 24 off: 66
create_rpc_request: opnum: 0x4 data_len: 0x30
create_rpc_request: data_len: 30 auth_len: 0 alloc_hint: 18
000000 smb_io_rpc_hdr hdr    
    0000 major     : 05
    0001 minor     : 00
    0002 pkt_type  : 00
    0003 flags     : 00
    0004 pack_type : 10 00 00 00 
prs_set_packtype: bigendian: No
    0008 frag_len  : 0030
    000a auth_len  : 0000
    000c call_id   : 00000098
000010 smb_io_rpc_hdr_req hdr_req
    0010 alloc_hint: 00000018
    0014 context_id: 0064
    0016 opnum     : 0004
frag_len: 0x30 data_len: 0x18 data_calc_len: 0x18
create_noauth_pdu: 95
create_noauth_pdu: 102
rpc_api_pipe_req: end: 48
ncalrpc_l_send_prs: data: 0x80a0b00 len 48
[000] 05 00 00 00 10 00 00 00  30 00 00 00 98 00 00 00  ........ 0.......
[010] 18 00 00 00 64 00 04 00  0B 00 00 00 00 00 00 00  ....d... ........
[020] 0B 00 00 00 53 00 54 00  4F 00 2D 00 4B 00 45 00  ....S.T. O.-.K.E.
write_socket(14,48)
write_socket(14,48) wrote 48
rpc_api_pipe_req: start: 48 off: 66
create_rpc_request: opnum: 0x4 data_len: 0x30
create_rpc_request: data_len: 30 auth_len: 0 alloc_hint: 18
000000 smb_io_rpc_hdr hdr    
    0000 major     : 05
    0001 minor     : 00
    0002 pkt_type  : 00
    0003 flags     : 00
    0004 pack_type : 10 00 00 00 
prs_set_packtype: bigendian: No
    0008 frag_len  : 0030
    000a auth_len  : 0000
    000c call_id   : 00000099
000010 smb_io_rpc_hdr_req hdr_req
    0010 alloc_hint: 00000018
    0014 context_id: 0064
    0016 opnum     : 0004
frag_len: 0x30 data_len: 0x18 data_calc_len: 0x18
create_noauth_pdu: 95
create_noauth_pdu: 102
rpc_api_pipe_req: end: 72
ncalrpc_l_send_prs: data: 0x80a0bd0 len 48
[000] 05 00 00 00 10 00 00 00  30 00 00 00 99 00 00 00  ........ 0.......
[010] 18 00 00 00 64 00 04 00  52 00 52 00 49 00 47 00  ....d... R.R.I.G.
[020] 00 00 A3 F5 9D 2F 48 18  07 93 00 00 89 00 00 00  ...../H. ........
write_socket(14,48)
write_socket(14,48) wrote 48
rpc_api_pipe_req: data_end: 72 and offset 66 wrong
rpc_con_pipe_req FAILED
cli_nt_setup_creds: request challenge failed
domain_client_validate: credentials failed (\\.)
SMB LM/NT Password did not match!
Rejecting user 'henry': authentication failed
32 bit error packet at line 493 cmd=115 (SMBsesssetupX) eclass=c000006d [Error: Unknown error (109,49152)]
error string = No such file or directory
size=35
smb_com=0x73
smb_rcls=109
smb_reh=0
smb_err=49152
smb_flg=136
smb_flg2=16384
smb_tid=0
smb_pid=51966
smb_uid=0
smb_mid=1792
smt_wct=0
smb_bcc=0

-- END "log.smb" --



--- BEGIN "smb.conf" ---

[global]
debug level = 100

netbios name = STO-KERRIG
server string = Samba (Primary DC)
workgroup = MELOCHORD
interfaces = 172.16.252.1/16

domain user map = /usr/local/samba-tng/private/domainuser.map
domain group map = /usr/local/samba-tng/private/domaingroup.map 

security = user 
domain logons = yes 
encrypt passwords = yes 
null passwords = no

os level = 65 
domain master = yes 
preferred master = yes 
local master = yes 

wins support = yes 
time server = yes 

logon script = login.bat 
logon drive = H:
logon home = \\STO-KERRIG\%U
logon path = \\STO-KERRIG\profile\%U

#print related junk
print command = /usr/bin/lpr -r -P%p %s
lpq command = /usr/bin/lpq -P%p
lprm command = /usr/bin/lprm -P%p %j
printcap name = /etc/printcap
load printers = yes

[homes] 
browseable = no 
writable = yes 
comment = Users' home directories 

[netlogon] 
path = /usr/local/samba-tng/netlogon 
writable = no 
guest ok = no 
comment = PDC netlogon share 

[profile]
path = /usr/local/samba-tng/profile
writeable = yes

[printers]
printing = bsd
comment = All Printers
path = /tmp
browseable = no
guest ok = yes
writable = no
printable = yes

[print$]
path = /usr/local/samba-tng/print
writable = yes
guest ok = yes

--- END "smb.conf" ---


-- 
Paul Collins <sneakums at eircom.net> - - - - - [ A&P,a&f ]
 GPG: 0A49 49A9 2932 0EE5 89B2  9EE0 3B65 7154 8131 1BCD
 PGP: 88BA 2393 8E3C CECF E43A  44B4 0766 DD71 04E5 962C
"Linux: it's just this operating system, you know?"



More information about the samba-ntdom mailing list