Strange Socket Errors With Latest TNG
Luke Kenneth Casson Leighton
lkcl at samba.org
Thu Feb 17 06:47:25 GMT 2000
ATHENE<00>. 00 is a group name. are you attempting to connect to a
domain instead of a server, by any chance?
:)
hmm...
On Thu, 17 Feb 2000, Joe Manojlovich wrote:
> Though I've actually been getting this for some time now. Anyway, on my
> redhat 6 server I daily update with the latest cvs of TNG. However,
> whenever I try to connect from my NT workstation, I get "server service
> not started" or similar errors, and "domain controller cannot be found"
> errors when I try to join the domain. The only thing that sticks out is
> the error messages I see when running rpcclient. Here's a snippet:
>
> socket open succeeded. file name: /tmp/.smb.0/agent
> socket connect to /tmp/.smb.0/agent failed: Connection refused
> redirect FAILED, make direct connection
> Connecting to 255.255.255.255 at port 445
> error connecting to 255.255.255.255:445 (Network is unreachable)
> Connecting to 255.255.255.255 at port 139
> error connecting to 255.255.255.255:139 (Network is unreachable)
> cli_establish_connection: failed to connect to ATHENE<00>
> (255.255.255.255)
> cli_net_use_add: connection failed
> ncacn_np_use_add: connection failed
> cli_connection_free: 199
> cli_connection_free: closed: No
> cmd_wks_query_info: query failed
>
> I know that the server is working, obviously, because my linux client
> can connect, and even the server can connect to itself. I attached my
> smb.conf file for good measure.
>
> --
> Joe Manojlovich
> jxm533 at psu.edu
<a href="mailto:lkcl at samba.org" > Luke Kenneth Casson Leighton </a>
<a href="http://cb1.com/~lkcl" > Samba and Network Development </a>
<a href="http://samba.org" > Samba Web site </a>
<a href="http://www.iss.net" > Internet Security Systems, Inc. </a>
<a href="http://mcp.com" > Macmillan Technical Publishing </a>
ISBN1578701503 DCE/RPC over SMB: Samba and Windows NT Domain Internals
-------------- next part --------------
# I HOPE THIS WORKS!!!
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = MYGROUP
netbios name = ATHENE
# server string is the equivalent of the NT Description field
server string = Samba Server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = 192.168.10. 127.
# What to do with winpopup messages
# message command = /usr/bin/linpopup "%f" "%m" %s; rm %s&
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; printcap name = /etc/printcap
; load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
log level = 20
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
smb passwd file = /usr/local/samba/lib/smbpasswd
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
unix password sync = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
# username map = /private/smbusers
username map = /usr/local/samba/lib/user.map
domain user map = /usr/local/samba/lib/domainuser.map
admin users = root, Adminstrator
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
# interfaces = eth0
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
remote announce = 192.168.10.255
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = yes
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 64
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
logon drive = h:
logon path = \\%L\homes
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
name resolve order = host lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
time server = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
create mode = 0600
directory mode = 0700
locking = no
browseable = yes
public = yes
# Un-comment the following and create the netlogon directory for Domain Logons
[netlogon]
comment = Network Logon Service
path = /home/netlogon
locking = no
browseable = yes
public = no
writable = yes
case sensitive = no
;case preserve = yes
default case = yes
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
#[Profiles]
# path = /home/profiles
# browseable = no
# writable = yes
# read only = no
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
More information about the samba-ntdom
mailing list