make install/codepage segmentation

James Nord nord at cdt.luth.se
Thu Apr 13 15:09:22 GMT 2000 

Hi all,

I had a problem similar to this earlier (very early on in TNG) on
Solaris.

Problem was it was creting a file called lib instead of a directory - so
after that everything crashed with the same reults as below.

If i creted the drictories by had *before* running the install it worked
fine.

May be completly unrelated...

/James

Luke Kenneth Casson Leighton wrote:
> 
> can someone take a look at this, i cut make_codepage over from cvs main,
> thx.
> 
> On Wed, 12 Apr 2000, Lisa Becktold {CADIG STAFF} wrote:
> 
> > Thanks to Michael Glauche, Tom Crummey, and Luke Kenneth Casson Leighton
> > for their responses.
> >
> > I did download both samba-tng-alpha-2.2 and samba-tng-alpha-2.3.  Configure
> > and make ran fine (although I saw a few warnings when I ran make).
> > But again, when I ran "make install", the library and binary installation
> > ran o.k., but the codepage installation bombed out!
> >
> > I tacked the "make install" output onto the end of this message....
> >
> > Tom, you asked what version of gcc I was using, and whether I'm running
> > a 32-bit or a 64-bit kernel.  I'm using gcc 2.8.1, and I'm running
> > a 64-bit kernel (On a Sun Enterprise 2, Solaris 2.7).
> >
> > These are the steps I'm using:
> >
> >      Download latest samba-tng-alpha code
> >       ftp://samba.org/pub/samba/alpha/samba-tng-alpha.2.2.tar.gz
> >
> >      Gunzip, untar samba-tng-alpha.2.2.tar.gz - it creates the directory
> >       samba-tng-alpha.2.2
> >
> >      Make a directory for the compiled code, libraries, etc.
> >       mkdir /usr/samba-tng-2.2
> >
> >      Run "configure"
> >       cd samba-tng-alpha.2.2/source
> >         ./configure --prefix=/usr/samba-tng-2.2
> >
> >      Run "make"
> >
> >      Run "make install"
> >
> >
> > Do you see any problems with the above?
> >
> > I'm trying to compile samba-tng-alpha-2.2 on a Sparc 20 (32-bit kernel)
> > using the SUNWspro C compiler, but I don't think the compiled code will
> > be too reliable (if it actually finishes compiling).  I see lots of
> > these messages:
> >
> >       "warning: argument #x is incompatible with prototype"
> >       "rpc_parse/parse_lsa.c", line 470: warning: statement not reached"
> >
> > If you have any ideas, please let me know - I'd really like to get this
> > version of Samba up and running.
> >
> > Here's "make install" output for samba-tng-alpha-2.2:
> >
> > =========================================================================
> > # make install
> >
> > Using FLAGS = -O         -Iinclude -I./include                     -I./ubiqx
> >                             -I./smbwrapper
> > -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
> > -DLOGFILEBASE="/usr/usna/samba-tng-2.2/var"
> > -DSMBLOGFILE="/usr/usna/samba-tng-2.2/var/log.smb"
> > -DNMBLOGFILE="/usr/usna/samba-tng-2.2/var/log.nmb"
> > -DCONFIGFILE="/usr/usna/samba-tng-2.2/lib/smb.conf"
> > -DLMHOSTSFILE="/usr/usna/samba-tng-2.2/lib/lmhosts"
> > -DSWATDIR="/usr/usna/samba-tng-2.2/swat"
> > -DSBINDIR="/usr/usna/samba-tng-2.2/sbin"
> > -DLOCKDIR="/usr/usna/samba-tng-2.2/var/locks"
> > -DSMBRUN="/usr/usna/samba-tng-2.2/bin/smbrun"
> > -DCODEPAGEDIR="/usr/usna/samba-tng-2.2/lib/codepages"
> > -DDRIVERFILE="/usr/usna/samba-tng-2.2/lib/printers.def"
> > -DBINDIR="/usr/usna/samba-tng-2.2/bin"
> > -DFORMSFILE="/usr/usna/samba-tng-2.2/lib/ntforms.def"
> > -DNTDRIVERSDIR="/usr/usna/samba-tng-2.2/lib" -DHAVE_INCLUDES_H
> > -DPASSWD_PROGRAM="/bin/passwd"
> > -DSMB_PASSWD_PROGRAM="/usr/usna/samba-tng-2.2/bin/smbpasswd"
> > -DSMB_PASSWD_FILE="/usr/usna/samba-tng-2.2/private/smbpasswd"
> > -DSAM_DIR="/usr/usna/samba-tng-2.2/sam"
> > -DSMB_PASSGRP_FILE="/usr/usna/samba-tng-2.2/private/smbpassgrp"
> > -DSMB_GROUP_FILE="/usr/usna/samba-tng-2.2/private/smbgroup"
> > -DSMB_ALIAS_FILE="/usr/usna/samba-tng-2.2/private/smbalias"
> > Using LIBS = -lsec -lgen -lsocket -lnsl  -ldl
> > Installing bin/libmsrpc.la in /usr/usna/samba-tng-2.2/lib using libtool
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/usna/samba-tng-2.2/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - use the `-RLIBDIR' linker flag
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > Installing bin/libsmb.la in /usr/usna/samba-tng-2.2/lib using libtool
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/usna/samba-tng-2.2/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - use the `-RLIBDIR' linker flag
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > Installing bin/libnmb.la in /usr/usna/samba-tng-2.2/lib using libtool
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/usna/samba-tng-2.2/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - use the `-RLIBDIR' linker flag
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > Installing bin/libsamba.la in /usr/usna/samba-tng-2.2/lib using libtool
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/usna/samba-tng-2.2/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - use the `-RLIBDIR' linker flag
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > Installing bin/libsmbpw.la in /usr/usna/samba-tng-2.2/lib using libtool
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/usna/samba-tng-2.2/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - use the `-RLIBDIR' linker flag
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > Installing bin/libubiqx.la in /usr/usna/samba-tng-2.2/lib using libtool
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/usna/samba-tng-2.2/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - use the `-RLIBDIR' linker flag
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > Installing bin/libsamrpass.la in /usr/usna/samba-tng-2.2/lib using libtool
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/usna/samba-tng-2.2/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - use the `-RLIBDIR' linker flag
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > Installing bin/libsmbpw.la in /usr/usna/samba-tng-2.2/lib using libtool
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/usna/samba-tng-2.2/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - use the `-RLIBDIR' linker flag
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > Installing bin/libsurs.la in /usr/usna/samba-tng-2.2/lib using libtool
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/usna/samba-tng-2.2/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - use the `-RLIBDIR' linker flag
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > Installing bin/smbclient in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/testparm in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/testprns in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/smbrun in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/smbstatus in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/rpcclient in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/smbpasswd in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/make_smbcodepage in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/make_unicodemap in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/regedit in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/samedit in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/net in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/svccontrol in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/cmdat in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/ntspool in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/nmblookup in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/make_printerdef in /usr/usna/samba-tng-2.2/bin using libtool
> > Installing bin/smbd in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/lsarpcd in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/svcctld in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/spoolssd in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/samrd in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/srvsvcd in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/wkssvcd in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/browserd in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/netlogond in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/winregd in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/nmbd in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing bin/swat in /usr/usna/samba-tng-2.2/sbin using libtool
> > Installing man pages in /usr/usna/samba-tng-2.2/man
> > ======================================================================
> > The man pages have been installed. You may uninstall them using the command
> > the command "make uninstallman" or make "uninstall" to uninstall binaries,
> > man pages and shell scripts.
> > ======================================================================
> > Installing scripts in /usr/usna/samba-tng-2.2/bin
> > ======================================================================
> > The scripts have been installed. You may uninstall them using
> > the command "make uninstallscripts" or "make install" to install binaries,
> > man pages and shell scripts. You may recover the previous version (if any
> > by "make revert".
> > ======================================================================
> > Installing codepage files in /usr/usna/samba-tng-2.2/lib/codepages
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.437
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.437
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.737
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.737
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.775
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.775
> > /usr/usna/samba-tng-2.2/bin/make_unicodemap: failed to get the file size for
> > file ./codepages/CP775.TXT. Error was No such file or directory
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.850
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.850
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.852
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.852
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.861
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.861
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.932
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.932
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.866
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.866
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.949
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.949
> > Illegal Instruction - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.950
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.950
> > Illegal Instruction - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.936
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.936
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.1251
> > Segmentation Fault - core dumped
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.1251
> > /usr/usna/samba-tng-2.2/bin/make_unicodemap: failed to get the file size for
> > file ./codepages/CP1251.TXT. Error was No such file or directory
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.ISO8859-1
> > /usr/usna/samba-tng-2.2/bin/make_smbcodepage: ISO8859-1 is not a valid codepage.
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.ISO8859-1
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.ISO8859-2
> > /usr/usna/samba-tng-2.2/bin/make_smbcodepage: ISO8859-2 is not a valid codepage.
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.ISO8859-2
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.ISO8859-5
> > /usr/usna/samba-tng-2.2/bin/make_smbcodepage: ISO8859-5 is not a valid codepage.
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.ISO8859-5
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.ISO8859-7
> > /usr/usna/samba-tng-2.2/bin/make_smbcodepage: ISO8859-7 is not a valid codepage.
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.ISO8859-7
> > Segmentation Fault - core dumped
> > Creating codepage file /usr/usna/samba-tng-2.2/lib/codepages/codepage.KOI-R
> > /usr/usna/samba-tng-2.2/bin/make_smbcodepage: KOI-R is not a valid codepage.
> > Creating unicode codepage file
> > /usr/usna/samba-tng-2.2/lib/codepages/unicode_map.KOI-R
> > /usr/usna/samba-tng-2.2/bin/make_unicodemap: failed to get the file size for
> > file ./codepages/CPKOI-R.TXT. Error was No such file or directory
> > ======================================================================
> > The code pages have been installed. You may uninstall them using the
> > command "make uninstallcp" or make "uninstall" to uninstall binaries,
> > man pages, shell scripts and code pages.
> > ======================================================================
> > Installing SWAT in /usr/usna/samba-tng-2.2/swat
> > Installing the Samba Web Admisistration Tool
> > /usr/usna/samba-tng-2.2/swat/images/globals.gif
> > /usr/usna/samba-tng-2.2/swat/images/home.gif
> > /usr/usna/samba-tng-2.2/swat/images/passwd.gif
> > /usr/usna/samba-tng-2.2/swat/images/printers.gif
> > /usr/usna/samba-tng-2.2/swat/images/samba.gif
> > /usr/usna/samba-tng-2.2/swat/images/shares.gif
> > /usr/usna/samba-tng-2.2/swat/images/status.gif
> > /usr/usna/samba-tng-2.2/swat/images/viewconfig.gif
> > /usr/usna/samba-tng-2.2/swat/help/welcome.html
> > /usr/usna/samba-tng-2.2/swat/help/DOMAIN_MEMBER.html
> > /usr/usna/samba-tng-2.2/swat/help/LDAP.html
> > /usr/usna/samba-tng-2.2/swat/help/debug2html.1.html
> > /usr/usna/samba-tng-2.2/swat/help/lmhosts.5.html
> > /usr/usna/samba-tng-2.2/swat/help/make_smbcodepage.1.html
> > /usr/usna/samba-tng-2.2/swat/help/nmbd.8.html
> > /usr/usna/samba-tng-2.2/swat/help/nmblookup.1.html
> > /usr/usna/samba-tng-2.2/swat/help/rpcclient.1.html
> > /usr/usna/samba-tng-2.2/swat/help/samba.7.html
> > /usr/usna/samba-tng-2.2/swat/help/smb.conf.5.html
> > /usr/usna/samba-tng-2.2/swat/help/smbclient.1.html
> > /usr/usna/samba-tng-2.2/swat/help/smbd.8.html
> > /usr/usna/samba-tng-2.2/swat/help/smbpasswd.5.html
> > /usr/usna/samba-tng-2.2/swat/help/smbpasswd.8.html
> > /usr/usna/samba-tng-2.2/swat/help/smbrun.1.html
> > /usr/usna/samba-tng-2.2/swat/help/smbstatus.1.html
> > /usr/usna/samba-tng-2.2/swat/help/smbtar.1.html
> > /usr/usna/samba-tng-2.2/swat/help/swat.8.html
> > /usr/usna/samba-tng-2.2/swat/help/testparm.1.html
> > /usr/usna/samba-tng-2.2/swat/help/testprns.1.html
> > /usr/usna/samba-tng-2.2/swat/include/footer.html
> > /usr/usna/samba-tng-2.2/swat/include/header.html
> > ======================================================================
> > The SWAT files have been installed. Remember to read the swat/README
> > for information on enabling and using SWAT
> > ======================================================================
> >
> >
> >
> >
> >
> >     ----------------------------------------------------------
> >       Lisa M. Becktold - lisa at usna.navy.mil, (410) 293-6480
> >                United States Naval Academy - CADIG
> >     590 Holloway Road, Rickover Hall, Annapolis, MD 21402-5000
> >
> 
> <a href=" mailto:lkcl at samba.org" > Luke Kenneth Casson Leighton    </a>
> <a href=" http://cb1.com/~lkcl"  > Samba and Network Development   </a>
> <a href=" http://samba.org"      > Samba Web site                  </a>
> <a href=" http://mcp.com"        > Macmillan Technical Publishing  </a>
> 
> ISBN1578701503 DCE/RPC over SMB: Samba and Windows NT Domain Internals

--
Technology is a word that describes something that doesn't work yet.
	Douglas Adams

More information about the samba-ntdom mailing list