svn commit: samba r9494 - in branches/SAMBA_4_0/source: . build/m4

jpeach at samba.org jpeach at samba.org
Tue Aug 23 00:16:15 GMT 2005


Author: jpeach
Date: 2005-08-23 00:16:13 +0000 (Tue, 23 Aug 2005)
New Revision: 9494

WebSVN: http://websvn.samba.org/cgi-bin/viewcvs.cgi?view=rev&root=samba&rev=9494

Log:
Add ac-archive macro for checking GCC options. Use this to add to
developer CFLAGS to handle different versions of GCC.

Added:
   branches/SAMBA_4_0/source/build/m4/ax_cflags_gcc_option.m4
Modified:
   branches/SAMBA_4_0/source/build/m4/check_cc.m4
   branches/SAMBA_4_0/source/build/m4/check_path.m4
   branches/SAMBA_4_0/source/configure.in


Changeset:
Added: branches/SAMBA_4_0/source/build/m4/ax_cflags_gcc_option.m4
===================================================================
--- branches/SAMBA_4_0/source/build/m4/ax_cflags_gcc_option.m4	2005-08-22 23:35:01 UTC (rev 9493)
+++ branches/SAMBA_4_0/source/build/m4/ax_cflags_gcc_option.m4	2005-08-23 00:16:13 UTC (rev 9494)
@@ -0,0 +1,184 @@
+dnl @synopsis AX_CFLAGS_GCC_OPTION (optionflag [,[shellvar][,[A][,[NA]]])
+dnl
+dnl AX_CFLAGS_GCC_OPTION(-fvomit-frame) would show a message as like
+dnl "checking CFLAGS for gcc -fvomit-frame ... yes" and adds
+dnl the optionflag to CFLAGS if it is understood. You can override
+dnl the shellvar-default of CFLAGS of course. The order of arguments
+dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL.
+dnl
+dnl The cousin AX_CXXFLAGS_GCC_OPTION would check for an option to add
+dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C
+dnl (since it is possible to use different compilers for C and C++).
+dnl
+dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or
+dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options.
+dnl However, if you use this macro in a few places, it would be great
+dnl if you would make up a new function-macro and submit it to the
+dnl ac-archive.
+dnl
+dnl   - $1 option-to-check-for : required ("-option" as non-value)
+dnl   - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case)
+dnl   - $3 action-if-found : add value to shellvariable
+dnl   - $4 action-if-not-found : nothing
+dnl
+dnl note: in earlier versions, $1-$2 were swapped. We try to detect the
+dnl situation and accept a $2=~/-/ as being the old option-to-check-for.
+dnl
+dnl also: there are other variants that emerged from the original macro
+dnl variant which did just test an option to be possibly added. However,
+dnl some compilers accept an option silently, or possibly for just
+dnl another option that was not intended. Therefore, we have to do a
+dnl generic test for a compiler family. For gcc we check "-pedantic"
+dnl being accepted which is also understood by compilers who just want
+dnl to be compatible with gcc even when not being made from gcc sources.
+dnl
+dnl see also:
+dnl       AX_CFLAGS_SUN_OPTION               AX_CFLAGS_HPUX_OPTION
+dnl       AX_CFLAGS_AIX_OPTION               AX_CFLAGS_IRIX_OPTION
+dnl
+dnl @, tested, experimental
+dnl @version $Id: ax_cflags_gcc_option.m4,v 1.5 2003/11/29 08:13:25 guidod Exp $
+dnl @author Guido Draheim <guidod at gmx.de>
+dnl http://ac-archive.sourceforge.net/C_Support/ax_cflags_gcc_option.m4
+dnl
+AC_DEFUN([AX_CFLAGS_GCC_OPTION_OLD], [dnl
+AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
+AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_gcc_option_$2])dnl
+AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for gcc m4_ifval($2,$2,-option)],
+VAR,[VAR="no, unknown"
+ AC_LANG_SAVE
+ AC_LANG_C
+ ac_save_[]FLAGS="$[]FLAGS"
+for ac_arg dnl
+in "-pedantic  % m4_ifval($2,$2,-option)"  dnl   GCC
+   #
+do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
+   AC_TRY_COMPILE([],[return 0;],
+   [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
+done
+ FLAGS="$ac_save_[]FLAGS"
+ AC_LANG_RESTORE
+])
+case ".$VAR" in
+     .ok|.ok,*) m4_ifvaln($3,$3) ;;
+   .|.no|.no,*) m4_ifvaln($4,$4) ;;
+   *) m4_ifvaln($3,$3,[
+   if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
+   then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
+   else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
+                      m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
+   fi ]) ;;
+esac
+AS_VAR_POPDEF([VAR])dnl
+AS_VAR_POPDEF([FLAGS])dnl
+])
+
+
+dnl the only difference - the LANG selection... and the default FLAGS
+
+AC_DEFUN([AX_CXXFLAGS_GCC_OPTION_OLD], [dnl
+AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
+AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_gcc_option_$2])dnl
+AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for gcc m4_ifval($2,$2,-option)],
+VAR,[VAR="no, unknown"
+ AC_LANG_SAVE
+ AC_LANG_CXX
+ ac_save_[]FLAGS="$[]FLAGS"
+for ac_arg dnl
+in "-pedantic  % m4_ifval($2,$2,-option)"  dnl   GCC
+   #
+do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
+   AC_TRY_COMPILE([],[return 0;],
+   [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
+done
+ FLAGS="$ac_save_[]FLAGS"
+ AC_LANG_RESTORE
+])
+case ".$VAR" in
+     .ok|.ok,*) m4_ifvaln($3,$3) ;;
+   .|.no|.no,*) m4_ifvaln($4,$4) ;;
+   *) m4_ifvaln($3,$3,[
+   if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
+   then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
+   else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
+                      m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
+   fi ]) ;;
+esac
+AS_VAR_POPDEF([VAR])dnl
+AS_VAR_POPDEF([FLAGS])dnl
+])
+
+dnl -------------------------------------------------------------------------
+
+AC_DEFUN([AX_CFLAGS_GCC_OPTION_NEW], [dnl
+AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
+AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_gcc_option_$1])dnl
+AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for gcc m4_ifval($1,$1,-option)],
+VAR,[VAR="no, unknown"
+ AC_LANG_SAVE
+ AC_LANG_C
+ ac_save_[]FLAGS="$[]FLAGS"
+for ac_arg dnl
+in "-pedantic  % m4_ifval($1,$1,-option)"  dnl   GCC
+   #
+do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
+   AC_TRY_COMPILE([],[return 0;],
+   [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
+done
+ FLAGS="$ac_save_[]FLAGS"
+ AC_LANG_RESTORE
+])
+case ".$VAR" in
+     .ok|.ok,*) m4_ifvaln($3,$3) ;;
+   .|.no|.no,*) m4_ifvaln($4,$4) ;;
+   *) m4_ifvaln($3,$3,[
+   if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
+   then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
+   else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
+                      m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
+   fi ]) ;;
+esac
+AS_VAR_POPDEF([VAR])dnl
+AS_VAR_POPDEF([FLAGS])dnl
+])
+
+
+dnl the only difference - the LANG selection... and the default FLAGS
+
+AC_DEFUN([AX_CXXFLAGS_GCC_OPTION_NEW], [dnl
+AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
+AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_gcc_option_$1])dnl
+AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for gcc m4_ifval($1,$1,-option)],
+VAR,[VAR="no, unknown"
+ AC_LANG_SAVE
+ AC_LANG_CXX
+ ac_save_[]FLAGS="$[]FLAGS"
+for ac_arg dnl
+in "-pedantic  % m4_ifval($1,$1,-option)"  dnl   GCC
+   #
+do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
+   AC_TRY_COMPILE([],[return 0;],
+   [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
+done
+ FLAGS="$ac_save_[]FLAGS"
+ AC_LANG_RESTORE
+])
+case ".$VAR" in
+     .ok|.ok,*) m4_ifvaln($3,$3) ;;
+   .|.no|.no,*) m4_ifvaln($4,$4) ;;
+   *) m4_ifvaln($3,$3,[
+   if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
+   then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
+   else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
+                      m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
+   fi ]) ;;
+esac
+AS_VAR_POPDEF([VAR])dnl
+AS_VAR_POPDEF([FLAGS])dnl
+])
+
+AC_DEFUN([AX_CFLAGS_GCC_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
+[AX_CFLAGS_GCC_OPTION_NEW($@)],[AX_CFLAGS_GCC_OPTION_OLD($@)])])
+
+AC_DEFUN([AX_CXXFLAGS_GCC_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
+[AX_CXXFLAGS_GCC_OPTION_NEW($@)],[AX_CXXFLAGS_GCC_OPTION_OLD($@)])])

Modified: branches/SAMBA_4_0/source/build/m4/check_cc.m4
===================================================================
--- branches/SAMBA_4_0/source/build/m4/check_cc.m4	2005-08-22 23:35:01 UTC (rev 9493)
+++ branches/SAMBA_4_0/source/build/m4/check_cc.m4	2005-08-23 00:16:13 UTC (rev 9494)
@@ -120,8 +120,7 @@
 	AC_MSG_CHECKING([that the C compiler can use the DEVELOPER_CFLAGS])
 	AC_TRY_RUN([#include "${srcdir-.}/build/tests/trivial.c"],
 		AC_MSG_RESULT(yes),
-		DEVELOPER_CFLAGS=""; AC_MSG_RESULT(no),
-		AC_MSG_WARN([cannot run when cross-compiling]))
+		DEVELOPER_CFLAGS=""; AC_MSG_RESULT(no))
 	CFLAGS="${OLD_CFLAGS}"
 fi
 

Modified: branches/SAMBA_4_0/source/build/m4/check_path.m4
===================================================================
--- branches/SAMBA_4_0/source/build/m4/check_path.m4	2005-08-22 23:35:01 UTC (rev 9493)
+++ branches/SAMBA_4_0/source/build/m4/check_path.m4	2005-08-23 00:16:13 UTC (rev 9494)
@@ -150,9 +150,22 @@
 AC_ARG_ENABLE(developer, [  --enable-developer      Turn on developer warnings and debugging (default=no)],
     [if test x$enable_developer = xyes; then
 	debug=yes
-	CFLAGS="${CFLAGS} -g -Wall"
         developer=yes
-    	DEVELOPER_CFLAGS="-Wshadow -Werror-implicit-function-declaration -Wstrict-prototypes -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wdeclaration-after-statement -Wmissing-format-attribute -Wformat=2 -Wno-format-y2k -DDEBUG_PASSWORD -DDEVELOPER"
+	DEVELOPER_CFLAGS="-DDEBUG_PASSWORD -DDEVELOPER"
+	if test x"$GCC" = x"yes" ; then
+	    AX_CFLAGS_GCC_OPTION(-Wall, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Wshadow, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Werror-implicit-function-declaration, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Wstrict-prototypes, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Wpointer-arith, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Wcast-qual, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Wcast-align, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Wwrite-strings, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Wmissing-format-attribute, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Wformat=2, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Wno-format-y2k, DEVELOPER_CFLAGS)
+	    AX_CFLAGS_GCC_OPTION(-Wno-declaration-after-statement, DEVELOPER_CFLAGS)
+	fi
     fi])
 
 debug=no

Modified: branches/SAMBA_4_0/source/configure.in
===================================================================
--- branches/SAMBA_4_0/source/configure.in	2005-08-22 23:35:01 UTC (rev 9493)
+++ branches/SAMBA_4_0/source/configure.in	2005-08-23 00:16:13 UTC (rev 9494)
@@ -9,6 +9,10 @@
 AC_CONFIG_SRCDIR([include/includes.h])
 AC_CONFIG_HEADER(include/config.h)
 
+# Macros used by configuration rules.
+sinclude(build/m4/ax_cflags_gcc_option.m4)
+
+# Configuration rules.
 sinclude(build/m4/env.m4)
 sinclude(build/m4/rewrite.m4)
 sinclude(lib/replace/config.m4)



More information about the samba-cvs mailing list