[Bug 11578] Rsync does start with an error directly connecting an USB drive to a port

[samba-bugs at samba.org]

https://bugzilla.samba.org/show_bug.cgi?id=11578

--- Comment #3 from Armin Mohring <armin_mohring at web.de> ---
This is the relevant part from dmesg after connecting the drive to an USB 3.0
port:

 5773.601144] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 5777.829686] usb 4-3: new SuperSpeed USB device number 6 using xhci_hcd
[ 5777.841134] usb 4-3: New USB device found, idVendor=0bc2, idProduct=3320
[ 5777.841139] usb 4-3: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 5777.841142] usb 4-3: Product: Expansion Desk
[ 5777.841144] usb 4-3: Manufacturer: Seagate
[ 5777.841146] usb 4-3: SerialNumber: NA4MVF15
[ 5777.843264] scsi8 : uas
[ 5777.843690] scsi 8:0:0:0: Direct-Access     Seagate  Expansion Desk   0712
PQ: 0 ANSI: 6
[ 5777.844184] sd 8:0:0:0: Attached scsi generic sg8 type 0
[ 5777.844251] sd 8:0:0:0: [sdh] Spinning up disk...
[ 5778.843059] .......ready
[ 5784.839976] sd 8:0:0:0: [sdh] 488378645 4096-byte logical blocks: (2.00
TB/1.81 TiB)
[ 5784.857762] sd 8:0:0:0: [sdh] Write Protect is off
[ 5784.857767] sd 8:0:0:0: [sdh] Mode Sense: 4f 00 00 00
[ 5784.857935] sd 8:0:0:0: [sdh] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5784.858486] sd 8:0:0:0: [sdh] 488378645 4096-byte logical blocks: (2.00
TB/1.81 TiB)
[ 5784.881361]  sdh: sdh1
[ 5784.881816] sd 8:0:0:0: [sdh] 488378645 4096-byte logical blocks: (2.00
TB/1.81 TiB)
[ 5784.882346] sd 8:0:0:0: [sdh] Attached SCSI disk

-- 
You are receiving this mail because:
You are the QA Contact for the bug.