What is it doing?

Perry Smith pedzsan at gmail.com
Mon Jan 13 16:19:39 MST 2014


Yea.  Shouldn't be hard to split up.  The hard part is some type
of dependable rotation.

You mention "pause"... I have to disconnect so I assume that would
"abort" the transfer.  But that triggered another question: would 
daemon mode help in this situation? (I assume not.  The daemon
probably folks and the child does all the work and dies when the
connection is lost.)

Perry

On Jan 13, 2014, at 4:55 PM, Kevin Korb <kmk at sanitarium.net> wrote:

> Signed PGP part
> If you have to abort it then I suppose that makes sense.  Otherwise
> you could throttle or pause it.
> 
> If you do have to split it up then it shouldn't be difficult.  Your
> original command was specifying multiple sources using a glob of some
> kind so you would just need to alter that.
> 
> On 01/13/2014 05:51 PM, Perry Smith wrote:
> > The NFS server is off somewhere else, locked down. secure, blah
> > blah.
> >
> > Doing it via a script that rotates is the same number of stat calls
> > but it would start at a different place each day.
> >
> > If I start it day 1 and it gets 25% through the stat calls, on day
> > 2, will rsync start where it left off or start back at the
> > beginning?  I figure since it does not save context, I would start
> > back at the beginning.
> >
> > So if I rotate, it would start at a different point.
> >
> > On Jan 13, 2014, at 4:44 PM, Kevin Korb <kmk at sanitarium.net>
> > wrote:
> >
> >> Signed PGP part It is still the same number of stat calls.
> >> Doesn't really matter if you split them up.
> >>
> >> Can you rsync to the NFS server directly?
> >>
> >> On 01/13/2014 05:34 PM, Perry Smith wrote:
> >>> Ok.  I can get the Mac up to version 3 but I'm wondering if I
> >>> need to rethink my whole strategy.  Since the source is on NFS,
> >>> doing a stat on all the files each run may cost me too much
> >>> time.
> >>>
> >>> I might need to split it into smaller pieces and then rotate
> >>> through the pieces via a script.  Do you have any suggestions
> >>> for this type of situation?
> >>>
> >>> Perry
> >>>
> >>> On Jan 13, 2014, at 4:08 PM, Kevin Korb <kmk at sanitarium.net>
> >>> wrote:
> >>>
> >>>> Signed PGP part On 01/13/2014 05:05 PM, Perry Smith wrote:
> >>>>> A friend and I noticed the --times or --archive flag.  I
> >>>>> have not stopped it yet but I'll add that flag (probably
> >>>>> --times).
> >>>>>
> >>>>> This is the first time so it must be #2.
> >>>>>
> >>>>> The side issuing the command is a Mac using rsync version
> >>>>> 2.6.9 protocol version 29.  The other side is AIX using
> >>>>> rsync version 3.1.0 protocol version 31 (that I built
> >>>>> myself).
> >>>>
> >>>> Yes, if either end is version 2 then rsync will have to
> >>>> index the entire tree on both systems before it starts
> >>>> copying anything.
> >>>>
> >>>>> I don't mind recompiling rsync on the Mac side if you
> >>>>> think that would improve things.
> >>>>
> >>>> I have no Mac experience but that is the way it is
> >>>> everywhere else.
> >>>>
> >>>>> I was trying to find some type of scratch file or
> >>>>> something but could not.  I'm curious, where is the index
> >>>>> kept?
> >>>>
> >>>> There is no index kept.  Rsync has no memory between runs
> >>>> which is why copying the timestamps is important.
> >>>>
> >>>> When I say indexing files I really mean it is going through
> >>>> the tree and doing a stat() on everything so it will have a
> >>>> list of existing files and timestamps to compare with the
> >>>> other end. Rsync v3 does this too but it does it
> >>>> incrementally while it is also copying stuff.
> >>>>
> >>>>> Thank you for your help Perry
> >>>>>
> >>>>> On Jan 13, 2014, at 2:49 PM, Kevin Korb
> >>>>> <kmk at sanitarium.net> wrote:
> >>>>>
> >>>>>> Signed PGP part First, don't run rsync without either
> >>>>>> --times or --archive.  Without that rsync won't copy
> >>>>>> timestamps and it won't be able to tell what is changed
> >>>>>> when you run it again.
> >>>>>>
> >>>>>> Second, if rsync isn't copying anything then there are 2
> >>>>>> reasons... 1. You already have most of the files copied
> >>>>>> and it is going through them looking for a file that
> >>>>>> needs updating 2. You are using rsync version 2 where all
> >>>>>> files had to be indexed before it copied anything.
> >>>>>>
> >>>>>> On 01/13/2014 03:06 PM, Perry Smith wrote:
> >>>>>>> This is my first time to really use rsync.  I did
> >>>>>>> small tests to get the arguments like I wanted and then
> >>>>>>> kicked off the big rsync about 2 and a half hours ago.
> >>>>>>> So far, it has not copied over any files.
> >>>>>>>
> >>>>>>> The command I used is:
> >>>>>>>
> >>>>>>> rsync \ --relative \ --recursive \ --copy-links \
> >>>>>>> host:/glob/that/matches/about/eighty/./directories \
> >>>>>>> /local/target/dir
> >>>>>>>
> >>>>>>> The list of directories are all full of symbolic links
> >>>>>>> that point off to NFS mounted file systems.  I don't
> >>>>>>> expect it to complete today but I do have to stop it
> >>>>>>> each day at the end of the work day. But it worries me
> >>>>>>> that it has yet to copy over any files.
> >>>>>>>
> >>>>>>> Is it really making progress?  Or will it take this
> >>>>>>> long to really start copying files over each day I
> >>>>>>> start it?
> >>>>>>>
> >>>>>>> I expect the total amount copied to be about 400G and
> >>>>>>> about 4 million files.
> >>>>>>>
> >>>>>>> It is possible to break this up into pieces if that
> >>>>>>> would help.
> >>>>>>>
> >>>>>>> Thank you for your help and advice, Perry
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>> --
> >>>>>> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> >>>>>>
> >>>>>>
> >>>>
> >>>>>>
> >>
> >>>>>>
> Kevin Korb			Phone:    (407) 252-6853
> >>>>>> Systems Administrator		Internet: FutureQuest, Inc.
> >>>>>> Kevin at FutureQuest.net  (work) Orlando, Florida
> >>>>>> kmk at sanitarium.net (personal) Web page:
> >>>>>> http://www.sanitarium.net/ PGP public key available on
> >>>>>> web site.
> >>>>>> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>
> >>>>>>
> >>
> >>>>>>
> --
> >>>>>> Please use reply-all for most replies to avoid omitting
> >>>>>> the mailing list. To unsubscribe or change options:
> >>>>>> https://lists.samba.org/mailman/listinfo/rsync Before
> >>>>>> posting, read:
> >>>>>> http://www.catb.org/~esr/faqs/smart-questions.html
> >>>>>
> >>>>
> >>>> --
> >>>> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> >>>>
> >>>>
> >>
> >>>>
> Kevin Korb			Phone:    (407) 252-6853
> >>>> Systems Administrator		Internet: FutureQuest, Inc.
> >>>> Kevin at FutureQuest.net  (work) Orlando, Florida
> >>>> kmk at sanitarium.net (personal) Web page:
> >>>> http://www.sanitarium.net/ PGP public key available on web
> >>>> site.
> >>>> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> >>>>
> >>>
> >>>>
> >>
> >>>>
> --
> >> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> >>
> >>
> Kevin Korb			Phone:    (407) 252-6853
> >> Systems Administrator		Internet: FutureQuest, Inc.
> >> Kevin at FutureQuest.net  (work) Orlando, Florida
> >> kmk at sanitarium.net (personal) Web page:
> >> http://www.sanitarium.net/ PGP public key available on web site.
> >> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> >>
> >
> >>
> --
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> 	Kevin Korb			Phone:    (407) 252-6853
> 	Systems Administrator		Internet:
> 	FutureQuest, Inc.		Kevin at FutureQuest.net  (work)
> 	Orlando, Florida		kmk at sanitarium.net (personal)
> 	Web page:			http://www.sanitarium.net/
> 	PGP public key available on web site.
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 495 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.samba.org/pipermail/rsync/attachments/20140113/2cfd4a74/attachment.pgp>


More information about the rsync mailing list