'error in rsync protocol data stream' - Tim Conway
Trevor Marshall
tm at well.com
Wed Sep 18 00:01:01 EST 2002
Tim,
Thanks for the thought, but I did all that back at the start of September
when I first posted all the gory details up.
Rsync, if it worked reliably, would be the perfect tool for the job.
..Trevor..
At 01:03 PM 9/17/2002 -0600, tim.conway at philips.com wrote:
>I'm sure your system is fine. What about the rsync, though? If it's
>still 2.4.6, you're not getting anywhere. Get the source from
>http://rsync.samba.org/ftp/rsync/rsync-2.5.5.tar.gz
>untargz it somewhere, and in the directory it creates, which will be named
>"rsync-2.5.5", type "./configure ; make ; make install"
>On a properly-configured Linux system, those three commands should all run
>successfully to completion, leaving you with the rsync binary as
>/usr/local/bin/rsync, and the man pages distributed among /usr/local/man.
>If your existing version is in /usr/bin or something, and you want to
>override it, add "--prefix=/usr" or whatever, to redirect the install.
>It's that easy.
>If you want to leave off the installation stuff, you can, because the
>binary is fully static and relocatable.
>I can't guarantee that this will solve your problems. Sometimes,
>individual problems can be fixed only by the individual involved. In my
>application, I finally had to write a custom app, completely abandoning
>rsync, because of the limitations of the platforms I'm required to use. I
>still use rsync a lot, but as just another tool, like tar, cp, rsh,
>whatever.
>
>Good luck.
>
>Tim Conway
>tim.conway at philips.com
>303.682.4917 office, 303.921.0301 cell
>Philips Semiconductor - Longmont TC
>1880 Industrial Circle, Suite D
>Longmont, CO 80501
>Available via SameTime Connect within Philips, caesupport2 on AIM
>"There are some who call me.... Tim?"
>
>
>
>
>Trevor Marshall <tm at well.com>
>Sent by: rsync-admin at lists.samba.org
>09/17/2002 11:10 AM
>
>
> To: rsync at lists.samba.org
> cc: (bcc: Tim Conway/LMT/SC/PHILIPS)
> Subject: Re: 'error in rsync protocol data stream' - Tim
Conway
> Classification:
>
>
>
>Tim,
>I reported a protocol data stream error on 9/8/2002
>Deatils are in my postes at that time
>rsync still fails everytime I run it.
>
>This time I added three v's as you just suggested and rsync just hung with
>two tasks in execution thus:
>root 3178 0.1 0.9 1796 868 pts/1 S 09:57 0:00
>/usr/bin/rsync -vvva --delete --exclude=root/snapsh
>root 3179 0.0 0.6 1628 632 pts/1 S 09:57 0:00
>/usr/bin/rsync -vvva --delete --exclude=root/snapsh
>
>and the last data rsync put out was:
>make_file(4,var/adm/fillup-templates/i4l.templ)
>make_file(4,var/adm/fillup-templates/i4l_b1.templ)
>make_file(4,var/adm/fillup-templates/i4l_default.templ)
>make_file(4,var/adm/fillup-templates/i4l_hardware.templ)
>make_file(4,var/adm/fillup-templates/i4l_hisax.templ)
>make_file(4,var/adm/fillup-templates/i4l_icn.templ)
>make_file(4,var/adm/fillup-templates/i4l_ignore.templ)
>-----------then hangs---------------------
>
>Any ideas?
>Last time I was told to upgrade my hardware and OS.
>I run a solid, scrupulously updated, SuSE 7.3 system on reliable P-II/400
>hardware
>
>..Trevor Marshall...
>
>At 10:36 AM 9/17/2002 -0600, you wrote:
>>Certainly, you should upgrade your rsync. 2.4.6 had more than its share
>>of problems. 2.5.5 is generating few complaints. As far as what's
>>actually happening to you, if it continues after the upgrade, give us
>>another run with more "v"s.
>>
>>Tim Conway
>>tim.conway at philips.com
>>303.682.4917 office, 303.921.0301 cell
>>Philips Semiconductor - Longmont TC
>>1880 Industrial Circle, Suite D
>>Longmont, CO 80501
>>Available via SameTime Connect within Philips, caesupport2 on AIM
>>"There are some who call me.... Tim?"
>>
>>
>>
>>
>>Pascal Bourguignon <pjb at informatimago.com>
>>Sent by: rsync-admin at lists.samba.org
>>09/16/2002 11:39 PM
>>Please respond to pjb
>>
>>
>> To: rsync at lists.samba.org
>> cc: (bcc: Tim Conway/LMT/SC/PHILIPS)
>> Subject: 'error in rsync protocol data stream'
>> Classification:
>>
>>
>>
>>Hello,
>>
>>While doing a local "rsync" with:
>>
>> rsync -v -auxHS --force / /backup/
>>
>>(on /backup is mounted another disk), I get these errors:
>>
>>rsync: error writing 4 unbuffered bytes - exiting: Broken pipe
>>rsync error: error in rsync protocol data stream (code 12) at io.c(463)
>>rsync: error writing 69 unbuffered bytes - exiting: Broken pipe
>>rsync error: error in rsync protocol data stream (code 12) at io.c(463)
>>
>>
>>[pascal at thalassa mnt]$ rsync --version
>>rsync version 2.5.5 protocol version 26
>>Copyright (C) 1996-2002 by Andrew Tridgell and others
>><http://rsync.samba.org/>
>>Capabilities: 64-bit files, socketpairs, hard links, symlinks,
>batchfiles,
>>
>> IPv6, 64-bit system inums, 64-bit internal inums
>>
>>
>>What's the problem?
>>Should I upgrade rsync?
>>
>>
>>--
>>__Pascal_Bourguignon__ http://www.informatimago.com/
>>----------------------------------------------------------------------
>> The name is Baud,...... James Baud.
>>--
>>To unsubscribe or change options:
>>http://lists.samba.org/mailman/listinfo/rsync
>>Before posting, read:
>http://www.tuxedo.org/~esr/faqs/smart-questions.html
>>
>>
>>
>>--
>>To unsubscribe or change options:
>http://lists.samba.org/mailman/listinfo/rsync
>>Before posting, read:
>http://www.tuxedo.org/~esr/faqs/smart-questions.html
>>
>--
>To unsubscribe or change options:
>http://lists.samba.org/mailman/listinfo/rsync
>Before posting, read: http://www.tuxedo.org/~esr/faqs/smart-questions.html
>
More information about the rsync
mailing list