[clug] scp

[Bryan Kilgallin (iiNet)]

Hey, Eyal:

>> debug1: Sending command: scp -v -t ~/
> 
> When I run this command, the next messages (which you removed?) are the 
> important ones:
> Sending file modes: C0664 14037 Test.txt
> Sink: C0664 14037 Test.txt
> Test.txt                                                                                                                                                                       
> 100%   14KB  13.0MB/s   00:00
> debug1: client_input_channel_req: channel 0 rtype exit-status reply 0

No, such as you quoted--was not displayed here! Some difference in 
configuration resulted in the above messages for you--but not for me!

{
debug1: Sending command: scp -v -t ~/

debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
}


> Are you sure that on the laptop you are logged in as user 'me'? Try
> $ ssh me at laptop ls -ltr 

 From the tower PC, that worked fine, listing the contents of the laptop 
user's directory. Without that test file, so far!
-- 
www.netspeed.com.au/bryan/