[clug] help network not working after upgrade to Fedora 22 (urgent)

[Paul Wilson]

note it still fails with/out interface at end of command

[root at mythbox ~]# route add default gw 192.168.0.1
SIOCADDRT: Network is unreachable

====

[root at mythbox ~]# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.0.0     192.168.0.1     255.255.255.0   UG    100    0        0 enp6s0
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0

[root at mythbox ~]# ifconfig -a
enp4s0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:43:00:38:af  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 18

enp6s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.2  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::21d:7dff:fed5:2481  prefixlen 64  scopeid 0x20<link>
        ether 00:1d:7d:d5:24:81  txqueuelen 1000  (Ethernet)
        RX packets 4559  bytes 477339 (466.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3255  bytes 768551 (750.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

....

On Mon, Aug 10, 2015 at 3:45 PM, Brett Worth <brett.worth at gmail.com> wrote:
> On 10/08/15 15:37, Paul wrote:
>>
>>
>> [root at mythbox ~]# route add default gw 192.168.0.1 enp6s0
>> SIOCADDRT: Network is unreachable
>
>
> You shouldn't have the enp6s0 on the end of that command. i.e.
> [root at mythbox ~]# route add default gw 192.168.0.1
>
>
> Brett
>
> --
>   /) _ _ _/_/ / / /  _ _//
>  /_)/</= / / (_(_/()/< ///
>
>
> --
> linux mailing list
> linux at lists.samba.org
> https://lists.samba.org/mailman/listinfo/linux