[clug] Mouse problem in Xorg (maybe?)

Rob Bolin rob at unigon.tv
Thu Mar 4 07:03:49 MST 2010


On Thu, 4 Mar 2010, Daniel Pittman wrote:
> Do you mean that when the mouse cursor is displayed in the middle of the
> screen, and you click the button, it acts on the left hand side of the 
screen?
> (eg: the visible and "real" mouse cursors are offset)

This...

> Can you post your X log (/var/log/Xorg.0.log, if you use a standard display
> manager) to show what the system thinks is going on?  Also, the output of
> 'xrandr --prop' and 'xinput list', please?[1]
Output follows

Thanks

Rob

xrandr --prop gives:
Screen 0: minimum 640 x 350, current 1280 x 960, maximum 1280 x 960
default connected 1280x960+0+0 0mm x 0mm
   1280x960       60.0*
   1152x864       75.0     70.0     60.0
   1024x768       85.0     75.0     70.0     60.0
   832x624        75.0
   800x600        85.0     75.0     72.0     60.0     56.0
   640x480        85.0     75.0     73.0     67.0     60.0
   720x400        88.0     70.0     85.0
   640x400        85.0
   640x350        85.0

xinput list gives:
⎡ Virtual core pointer                          id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ "CHICONY USB Keyboard"                    id=9    [slave  pointer  (2)]
⎜   ↳ "ImPS/2 Logitech Wheel Mouse"             id=10   [slave  pointer  (2)]
⎣ Virtual core keyboard                         id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
    ↳ "Power Button"                            id=6    [slave  keyboard (3)]
    ↳ "Power Button"                            id=7    [slave  keyboard (3)]
    ↳ "CHICONY USB Keyboard"                    id=8    [slave  keyboard (3)]

/var/log/Xorg.0.log contains:


X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian
Current Operating System: Linux athena 2.6.32-trunk-686 #1 SMP Sun Jan 10 
06:32:16 UTC 2010 i686
Kernel command line: root=/dev/hda1 ro quiet
Build Date: 16 February 2010  08:37:23AM
xorg-server 2:1.7.5-1 (bgoglin at debian.org) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar  5 11:59:06 2010
(II) Loader magic: 0x81e7020
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:1132:0e11:001a Intel Corporation 82815 Chipset 
Graphics Controller (CGC) rev 2, Mem @ 0x44000000/67108864, 0x40300000/524288
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default intel Device 0"
		Driver	"intel"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default intel Screen 0"
		Device	"Builtin Default intel Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default intel Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00 at 00:02:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) intel(0): Creating default Display subsection in Screen section
	"Builtin Default intel Screen 0" for depth/fbbpp 16/16
(==) intel(0): Depth 16, (==) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.2.1
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 6.0
(II) intel(0): initializing int10
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 1024 kB
(II) intel(0): VESA VBE OEM: Intel(R) 810, Intel(R) 815 Chipset Video BIOS
(II) intel(0): VESA VBE OEM Software Rev: 35.135
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(R) 810, Intel(R) 815 Chipset
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) intel(0): VESA VBE DDC supported
(II) intel(0): VESA VBE DDC Level 2
(II) intel(0): VESA VBE DDC transfer in appr. 1 sec.
(II) intel(0): VESA VBE DDC read successfully
(WW) EDID preferred timing clock 108.00MHz exceeds claimed max 100MHz, fixing
(II) intel(0): Manufacturer: HTC  Model: b3b1  Serial#: 0
(II) intel(0): Year: 2000  Week: 46
(II) intel(0): EDID Version: 1.1
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync:  Separate  Composite
(II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 25
(II) intel(0): Gamma: 2.85
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): redX: 0.612 redY: 0.353   greenX: 0.293 greenY: 0.595
(II) intel(0): blueX: 0.149 blueY: 0.068   whiteX: 0.281 whiteY: 0.311
(II) intel(0): Supported established timings:
(II) intel(0): 720x400 at 70Hz
(II) intel(0): 720x400 at 88Hz
(II) intel(0): 640x480 at 60Hz
(II) intel(0): 640x480 at 67Hz
(II) intel(0): 640x480 at 72Hz
(II) intel(0): 640x480 at 75Hz
(II) intel(0): 800x600 at 56Hz
(II) intel(0): 800x600 at 60Hz
(II) intel(0): 800x600 at 72Hz
(II) intel(0): 800x600 at 75Hz
(II) intel(0): 832x624 at 75Hz
(II) intel(0): 1024x768 at 87Hz (interlaced)
(II) intel(0): 1024x768 at 60Hz
(II) intel(0): 1024x768 at 70Hz
(II) intel(0): 1024x768 at 75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 640  vsize 480  refresh: 70  vid: 18993
(II) intel(0): #1: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) intel(0): #2: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) intel(0): #3: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) intel(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) intel(0): #5: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) intel(0): #6: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) intel(0): Ranges: V min: 50 V max: 99 Hz, H min: 31 H max: 70 kHz, 
PixClock max 108 MHz
(II) intel(0): Monitor name: CM615
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 94.5 MHz   Image Size:  306 x 230 mm
(II) intel(0): h_active: 1024  h_sync: 1072  h_sync_end 1168 h_blank_end 1376 
h_border: 0
(II) intel(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 808 
v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz   Image Size:  306 x 230 mm
(II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 
h_border: 0
(II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 
v_border: 0
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff002283b1b300000000
(II) intel(0): 	2e0a01016c2119b9e8d1629c5a4b9826
(II) intel(0): 	11484ffffe00314a315945596159714f
(II) intel(0): 	814081800101000000fd0032631f460a
(II) intel(0): 	000a202020202020000000fc00434d36
(II) intel(0): 	31350a20202020202020ea2400604100
(II) intel(0): 	28303060130032e61000001e302a0098
(II) intel(0): 	51002a403070130032e61000001e0051
(II) intel(0): EDID vendor "HTC", prod id 46001
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 
772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 
625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 
500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 
520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 
525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   35.50  720 738 846 900  400 421 423 
449 -hsync -vsync (39.4 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 
449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 
772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 
777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1024x768"x0.0   44.90  1024 1032 1208 1264  768 768 
772 817 interlace +hsync +vsync (35.5 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 
667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 
625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 
666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 
509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 
631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 
964 1000 +hsync +vsync (60.0 kHz)
(--) intel(0): Chipset: "i815"
(--) intel(0): Linear framebuffer at 0x44000000
(--) intel(0): IO registers at addr 0x40300000
(II) intel(0): Kernel reported 50176 total, 1 used
(II) intel(0): I810CheckAvailableMemory: 200700k available
(==) intel(0): Will alloc AGP framebuffer: 24576 kByte
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(II) intel(0): <default monitor>: Using hsync range of 31.00-70.00 kHz
(II) intel(0): <default monitor>: Using vrefresh range of 50.00-99.00 Hz
(II) intel(0): <default monitor>: Using maximum pixel clock of 108.00 MHz
(II) intel(0): Estimated virtual size for aspect ratio 1.3200 is 1280x960
(II) intel(0): Clock range:   9.50 to 163.00 MHz
(II) intel(0): Not using default mode "320x175" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x200" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "360x200" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (unknown reason)
(II) intel(0): Not using default mode "512x384" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "640x480" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (height too large for 
virtual size)
(II) intel(0): Not using default mode "640x512" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (height too large for 
virtual size)
(II) intel(0): Not using default mode "640x512" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (height too large for 
virtual size)
(II) intel(0): Not using default mode "640x512" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual 
size)
(II) intel(0): Not using default mode "800x600" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual 
size)
(II) intel(0): Not using default mode "800x600" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual 
size)
(II) intel(0): Not using default mode "800x600" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual 
size)
(II) intel(0): Not using default mode "800x600" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual 
size)
(II) intel(0): Not using default mode "800x600" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (width too large for virtual 
size)
(II) intel(0): Not using default mode "896x672" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (width too large for virtual 
size)
(II) intel(0): Not using default mode "896x672" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (width too large for virtual 
size)
(II) intel(0): Not using default mode "928x696" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (width too large for virtual 
size)
(II) intel(0): Not using default mode "928x696" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual 
size)
(II) intel(0): Not using default mode "960x720" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual 
size)
(II) intel(0): Not using default mode "960x720" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "416x312" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1152x864" (hsync out of range)
(II) intel(0): Not using default mode "576x432" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1152x864" (hsync out of range)
(II) intel(0): Not using default mode "576x432" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1152x864" (hsync out of range)
(II) intel(0): Not using default mode "576x432" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1360x768" (width too large for virtual 
size)
(II) intel(0): Not using default mode "680x384" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1360x768" (width too large for virtual 
size)
(II) intel(0): Not using default mode "680x384" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual 
size)
(II) intel(0): Not using default mode "700x525" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual 
size)
(II) intel(0): Not using default mode "700x525" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual 
size)
(II) intel(0): Not using default mode "700x525" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual 
size)
(II) intel(0): Not using default mode "700x525" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1440x900" (width too large for virtual 
size)
(II) intel(0): Not using default mode "720x450" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1024" (width too large for virtual 
size)
(II) intel(0): Not using default mode "800x512" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1680x1050" (width too large for virtual 
size)
(II) intel(0): Not using default mode "840x525" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1680x1050" (width too large for virtual 
size)
(II) intel(0): Not using default mode "840x525" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1680x1050" (width too large for virtual 
size)
(II) intel(0): Not using default mode "840x525" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1680x1050" (width too large for virtual 
size)
(II) intel(0): Not using default mode "840x525" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1680x1050" (width too large for virtual 
size)
(II) intel(0): Not using default mode "840x525" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1080" (width too large for virtual 
size)
(II) intel(0): Not using default mode "960x540" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1200" (width too large for virtual 
size)
(II) intel(0): Not using default mode "960x600" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual 
size)
(II) intel(0): Not using default mode "960x720" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (width too large for virtual 
size)
(II) intel(0): Not using default mode "1024x768" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (width too large for virtual 
size)
(II) intel(0): Not using default mode "1024x768" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (width too large for virtual 
size)
(II) intel(0): Not using default mode "1024x768" (bad mode 
clock/interlace/doublescan)
(II) intel(0): Not using driver mode "1280x1024" (height too large for virtual 
size)
(II) intel(0): Not using driver mode "1024x768" (unknown reason)
(--) intel(0): Virtual size is 1280x960 (pitch 1280)
(**) intel(0): *Driver mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 
964 1000 +hsync +vsync (60.0 kHz)
(**) intel(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 
964 1000 +hsync +vsync (60.0 kHz)
(**) intel(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 
868 900 +hsync +vsync (67.5 kHz)
(**) intel(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 
868 900 +hsync +vsync (67.5 kHz)
(**) intel(0): *Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz
(II) intel(0): Modeline "1152x864"x75.0  104.99  1152 1224 1352 1552  864 865 
868 902 -hsync +vsync (67.6 kHz)
(**) intel(0): *Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz
(II) intel(0): Modeline "1152x864"x70.0   96.77  1152 1224 1344 1536  864 865 
868 900 -hsync +vsync (63.0 kHz)
(**) intel(0): *Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
(II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 
868 895 -hsync +vsync (53.7 kHz)
(**) intel(0): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 
772 808 +hsync +vsync (68.7 kHz)
(**) intel(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 
772 800 +hsync +vsync (60.0 kHz)
(**) intel(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 
777 806 -hsync -vsync (56.5 kHz)
(**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 
777 806 -hsync -vsync (48.4 kHz)
(**) intel(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 
772 808 +hsync +vsync (68.7 kHz)
(**) intel(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 
772 800 +hsync +vsync (60.0 kHz)
(**) intel(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 
777 806 -hsync -vsync (56.5 kHz)
(**) intel(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 
777 806 -hsync -vsync (48.4 kHz)
(**) intel(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 
667 -hsync -vsync (49.7 kHz)
(**) intel(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 
667 -hsync -vsync (49.7 kHz)
(**) intel(0): *Driver mode "800x600": 56.2 MHz, 53.7 kHz, 85.1 Hz
(II) intel(0): Modeline "800x600"x85.1   56.25  800 832 896 1048  600 601 604 
631 +hsync +vsync (53.7 kHz)
(**) intel(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 
625 +hsync +vsync (46.9 kHz)
(**) intel(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 
666 +hsync +vsync (48.1 kHz)
(**) intel(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 
628 +hsync +vsync (37.9 kHz)
(**) intel(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 
625 +hsync +vsync (35.2 kHz)
(**) intel(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 
631 +hsync +vsync (53.7 kHz)
(**) intel(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 
625 +hsync +vsync (46.9 kHz)
(**) intel(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 
666 +hsync +vsync (48.1 kHz)
(**) intel(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 
628 +hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 
625 +hsync +vsync (35.2 kHz)
(**) intel(0): *Driver mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 
509 -hsync -vsync (43.3 kHz)
(**) intel(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 
500 -hsync -vsync (37.5 kHz)
(**) intel(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 
520 -hsync -vsync (37.9 kHz)
(**) intel(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 
525 -hsync -vsync (35.0 kHz)
(**) intel(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 
525 -hsync -vsync (31.5 kHz)
(**) intel(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 
509 -hsync -vsync (43.3 kHz)
(**) intel(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 
500 -hsync -vsync (37.5 kHz)
(**) intel(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 
520 -hsync -vsync (37.9 kHz)
(**) intel(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 
525 -hsync -vsync (31.5 kHz)
(**) intel(0): *Driver mode "720x400": 35.5 MHz, 39.4 kHz, 87.8 Hz
(II) intel(0): Modeline "720x400"x87.8   35.50  720 738 846 900  400 421 423 
449 -hsync -vsync (39.4 kHz)
(**) intel(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 
449 -hsync +vsync (31.5 kHz)
(**) intel(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 
446 -hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 
445 -hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 
445 +hsync -vsync (37.9 kHz)
(**) intel(0): Display dimensions: (330, 250) mm
(**) intel(0): DPI set to (98, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) intel(0): page flipping disabled
(II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i810" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0x44000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0x40300000
(II) intel(0): [agp] dcacheHandle : 0x1
(II) intel(0): [agp] GART: Found 4096K Z buffer memory
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 384 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : 133b000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ]
(II) intel(0): chose watermark 0x22210000: (tab.freq 108.0)
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Horizontal and Vertical Lines
	Setting up tile and stipple cache:
		30 128x128 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(==) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: Loaded and initialized /usr/lib/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event1"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Power Button" (/dev/input/event0)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event0"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/event2)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/event2"
(II) "CHICONY USB Keyboard": Found keys
(II) "CHICONY USB Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""CHICONY USB Keyboard"" (type: 
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/event3)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/event3"
(II) "CHICONY USB Keyboard": Found 3 mouse buttons
(II) "CHICONY USB Keyboard": Found scroll wheel(s)
(II) "CHICONY USB Keyboard": Found relative axes
(II) "CHICONY USB Keyboard": Found x and y relative axes
(II) "CHICONY USB Keyboard": Configuring as mouse
(**) "CHICONY USB Keyboard": YAxisMapping: buttons 4 and 5
(**) "CHICONY USB Keyboard": EmulateWheelButton: 4, EmulateWheelInertia: 10, 
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""CHICONY USB Keyboard"" (type: 
MOUSE)
(**) "CHICONY USB Keyboard": (accel) keeping acceleration scheme 1
(**) "CHICONY USB Keyboard": (accel) acceleration profile 0
(II) "CHICONY USB Keyboard": initialized for relative axes.
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/mouse0)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""CHICONY USB Keyboard""
(II) config/udev: Adding input device "ImPS/2 Logitech Wheel Mouse" 
(/dev/input/event5)
(**) "ImPS/2 Logitech Wheel Mouse": always reports core events
(**) "ImPS/2 Logitech Wheel Mouse": Device: "/dev/input/event5"
(II) "ImPS/2 Logitech Wheel Mouse": Found 3 mouse buttons
(II) "ImPS/2 Logitech Wheel Mouse": Found scroll wheel(s)
(II) "ImPS/2 Logitech Wheel Mouse": Found relative axes
(II) "ImPS/2 Logitech Wheel Mouse": Found x and y relative axes
(II) "ImPS/2 Logitech Wheel Mouse": Configuring as mouse
(**) "ImPS/2 Logitech Wheel Mouse": YAxisMapping: buttons 4 and 5
(**) "ImPS/2 Logitech Wheel Mouse": EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""ImPS/2 Logitech Wheel Mouse"" 
(type: MOUSE)
(**) "ImPS/2 Logitech Wheel Mouse": (accel) keeping acceleration scheme 1
(**) "ImPS/2 Logitech Wheel Mouse": (accel) acceleration profile 0
(II) "ImPS/2 Logitech Wheel Mouse": initialized for relative axes.
(II) config/udev: Adding input device "ImPS/2 Logitech Wheel Mouse" 
(/dev/input/mouse1)
(**) "ImPS/2 Logitech Wheel Mouse": always reports core events
(**) "ImPS/2 Logitech Wheel Mouse": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""ImPS/2 Logitech Wheel Mouse""
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "CHICONY USB Keyboard": Close
(II) UnloadModule: "evdev"
(II) "CHICONY USB Keyboard": Close
(II) UnloadModule: "evdev"
(II) "ImPS/2 Logitech Wheel Mouse": Close
(II) UnloadModule: "evdev"
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xd0756000 at 0xb7797000
(II) intel(0): [drm] Closed DRM master.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) APM registered successfully
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0x44000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0x40300000
(II) intel(0): [agp] dcacheHandle : 0x1
(II) intel(0): [agp] GART: Found 4096K Z buffer memory
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 384 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : 133b000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ]
(II) intel(0): chose watermark 0x22210000: (tab.freq 108.0)
(==) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(==) RandR enabled
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: Loaded and initialized /usr/lib/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event1"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Power Button" (/dev/input/event0)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event0"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/event2)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/event2"
(II) "CHICONY USB Keyboard": Found keys
(II) "CHICONY USB Keyboard": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/event3)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/event3"
(II) "CHICONY USB Keyboard": Found 3 mouse buttons
(II) "CHICONY USB Keyboard": Found scroll wheel(s)
(II) "CHICONY USB Keyboard": Found relative axes
(II) "CHICONY USB Keyboard": Found x and y relative axes
(II) "CHICONY USB Keyboard": Configuring as mouse
(**) "CHICONY USB Keyboard": YAxisMapping: buttons 4 and 5
(**) "CHICONY USB Keyboard": EmulateWheelButton: 4, EmulateWheelInertia: 10, 
EmulateWheelTimeout: 200
(**) "CHICONY USB Keyboard": (accel) keeping acceleration scheme 1
(**) "CHICONY USB Keyboard": (accel) acceleration profile 0
(II) "CHICONY USB Keyboard": initialized for relative axes.
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/mouse0)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""CHICONY USB Keyboard""
(II) config/udev: Adding input device "ImPS/2 Logitech Wheel Mouse" 
(/dev/input/event5)
(**) "ImPS/2 Logitech Wheel Mouse": always reports core events
(**) "ImPS/2 Logitech Wheel Mouse": Device: "/dev/input/event5"
(II) "ImPS/2 Logitech Wheel Mouse": Found 3 mouse buttons
(II) "ImPS/2 Logitech Wheel Mouse": Found scroll wheel(s)
(II) "ImPS/2 Logitech Wheel Mouse": Found relative axes
(II) "ImPS/2 Logitech Wheel Mouse": Found x and y relative axes
(II) "ImPS/2 Logitech Wheel Mouse": Configuring as mouse
(**) "ImPS/2 Logitech Wheel Mouse": YAxisMapping: buttons 4 and 5
(**) "ImPS/2 Logitech Wheel Mouse": EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) "ImPS/2 Logitech Wheel Mouse": (accel) keeping acceleration scheme 1
(**) "ImPS/2 Logitech Wheel Mouse": (accel) acceleration profile 0
(II) "ImPS/2 Logitech Wheel Mouse": initialized for relative axes.
(II) config/udev: Adding input device "ImPS/2 Logitech Wheel Mouse" 
(/dev/input/mouse1)
(**) "ImPS/2 Logitech Wheel Mouse": always reports core events
(**) "ImPS/2 Logitech Wheel Mouse": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""ImPS/2 Logitech Wheel Mouse""
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) xf86AcquireGART: AGPIOC_ACQUIRE failed (Device or resource busy)
(EE) GARTInit: AGPIOC_INFO failed (Invalid argument)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ]
(II) intel(0): chose watermark 0x22210000: (tab.freq 108.0)
(II) "Power Button": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "CHICONY USB Keyboard": Device reopened after 1 attempts.
(II) "CHICONY USB Keyboard": Device reopened after 1 attempts.
(II) "ImPS/2 Logitech Wheel Mouse": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) "ImPS/2 Logitech Wheel Mouse": Close
(II) UnloadModule: "evdev"
(II) "CHICONY USB Keyboard": Close
(II) UnloadModule: "evdev"
(II) "CHICONY USB Keyboard": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xd0718000 at 0xb7797000
(II) intel(0): [drm] Closed DRM master.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) APM registered successfully
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0x44000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0x40300000
(II) intel(0): [agp] dcacheHandle : 0x1
(II) intel(0): [agp] GART: Found 4096K Z buffer memory
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 384 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : 133b000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ]
(II) intel(0): chose watermark 0x22210000: (tab.freq 108.0)
(==) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(==) RandR enabled
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: Loaded and initialized /usr/lib/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event1"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Power Button" (/dev/input/event0)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event0"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/event2)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/event2"
(II) "CHICONY USB Keyboard": Found keys
(II) "CHICONY USB Keyboard": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/event3)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/event3"
(II) "CHICONY USB Keyboard": Found 3 mouse buttons
(II) "CHICONY USB Keyboard": Found scroll wheel(s)
(II) "CHICONY USB Keyboard": Found relative axes
(II) "CHICONY USB Keyboard": Found x and y relative axes
(II) "CHICONY USB Keyboard": Configuring as mouse
(**) "CHICONY USB Keyboard": YAxisMapping: buttons 4 and 5
(**) "CHICONY USB Keyboard": EmulateWheelButton: 4, EmulateWheelInertia: 10, 
EmulateWheelTimeout: 200
(**) "CHICONY USB Keyboard": (accel) keeping acceleration scheme 1
(**) "CHICONY USB Keyboard": (accel) acceleration profile 0
(II) "CHICONY USB Keyboard": initialized for relative axes.
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/mouse0)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""CHICONY USB Keyboard""
(II) config/udev: Adding input device "ImPS/2 Logitech Wheel Mouse" 
(/dev/input/event5)
(**) "ImPS/2 Logitech Wheel Mouse": always reports core events
(**) "ImPS/2 Logitech Wheel Mouse": Device: "/dev/input/event5"
(II) "ImPS/2 Logitech Wheel Mouse": Found 3 mouse buttons
(II) "ImPS/2 Logitech Wheel Mouse": Found scroll wheel(s)
(II) "ImPS/2 Logitech Wheel Mouse": Found relative axes
(II) "ImPS/2 Logitech Wheel Mouse": Found x and y relative axes
(II) "ImPS/2 Logitech Wheel Mouse": Configuring as mouse
(**) "ImPS/2 Logitech Wheel Mouse": YAxisMapping: buttons 4 and 5
(**) "ImPS/2 Logitech Wheel Mouse": EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) "ImPS/2 Logitech Wheel Mouse": (accel) keeping acceleration scheme 1
(**) "ImPS/2 Logitech Wheel Mouse": (accel) acceleration profile 0
(II) "ImPS/2 Logitech Wheel Mouse": initialized for relative axes.
(II) config/udev: Adding input device "ImPS/2 Logitech Wheel Mouse" 
(/dev/input/mouse1)
(**) "ImPS/2 Logitech Wheel Mouse": always reports core events
(**) "ImPS/2 Logitech Wheel Mouse": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""ImPS/2 Logitech Wheel Mouse""
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "CHICONY USB Keyboard": Close
(II) UnloadModule: "evdev"
(II) "CHICONY USB Keyboard": Close
(II) UnloadModule: "evdev"
(II) "ImPS/2 Logitech Wheel Mouse": Close
(II) UnloadModule: "evdev"
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xd0718000 at 0xb7797000
(II) intel(0): [drm] Closed DRM master.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) APM registered successfully
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0x44000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0x40300000
(II) intel(0): [agp] dcacheHandle : 0x1
(II) intel(0): [agp] GART: Found 4096K Z buffer memory
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 384 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : 133b000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ]
(II) intel(0): chose watermark 0x22210000: (tab.freq 108.0)
(==) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(==) RandR enabled
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: Loaded and initialized /usr/lib/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event1"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Power Button" (/dev/input/event0)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event0"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/event2)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/event2"
(II) "CHICONY USB Keyboard": Found keys
(II) "CHICONY USB Keyboard": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/event3)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/event3"
(II) "CHICONY USB Keyboard": Found 3 mouse buttons
(II) "CHICONY USB Keyboard": Found scroll wheel(s)
(II) "CHICONY USB Keyboard": Found relative axes
(II) "CHICONY USB Keyboard": Found x and y relative axes
(II) "CHICONY USB Keyboard": Configuring as mouse
(**) "CHICONY USB Keyboard": YAxisMapping: buttons 4 and 5
(**) "CHICONY USB Keyboard": EmulateWheelButton: 4, EmulateWheelInertia: 10, 
EmulateWheelTimeout: 200
(**) "CHICONY USB Keyboard": (accel) keeping acceleration scheme 1
(**) "CHICONY USB Keyboard": (accel) acceleration profile 0
(II) "CHICONY USB Keyboard": initialized for relative axes.
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/mouse0)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""CHICONY USB Keyboard""
(II) config/udev: Adding input device "ImPS/2 Logitech Wheel Mouse" 
(/dev/input/event5)
(**) "ImPS/2 Logitech Wheel Mouse": always reports core events
(**) "ImPS/2 Logitech Wheel Mouse": Device: "/dev/input/event5"
(II) "ImPS/2 Logitech Wheel Mouse": Found 3 mouse buttons
(II) "ImPS/2 Logitech Wheel Mouse": Found scroll wheel(s)
(II) "ImPS/2 Logitech Wheel Mouse": Found relative axes
(II) "ImPS/2 Logitech Wheel Mouse": Found x and y relative axes
(II) "ImPS/2 Logitech Wheel Mouse": Configuring as mouse
(**) "ImPS/2 Logitech Wheel Mouse": YAxisMapping: buttons 4 and 5
(**) "ImPS/2 Logitech Wheel Mouse": EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) "ImPS/2 Logitech Wheel Mouse": (accel) keeping acceleration scheme 1
(**) "ImPS/2 Logitech Wheel Mouse": (accel) acceleration profile 0
(II) "ImPS/2 Logitech Wheel Mouse": initialized for relative axes.
(II) config/udev: Adding input device "ImPS/2 Logitech Wheel Mouse" 
(/dev/input/mouse1)
(**) "ImPS/2 Logitech Wheel Mouse": always reports core events
(**) "ImPS/2 Logitech Wheel Mouse": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""ImPS/2 Logitech Wheel Mouse""
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "CHICONY USB Keyboard": Close
(II) UnloadModule: "evdev"
(II) "CHICONY USB Keyboard": Close
(II) UnloadModule: "evdev"
(II) "ImPS/2 Logitech Wheel Mouse": Close
(II) UnloadModule: "evdev"
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xd0718000 at 0xb7797000
(II) intel(0): [drm] Closed DRM master.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) APM registered successfully
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0x44000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0x40300000
(II) intel(0): [agp] dcacheHandle : 0x1
(II) intel(0): [agp] GART: Found 4096K Z buffer memory
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 384 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : 133b000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ]
(II) intel(0): chose watermark 0x22210000: (tab.freq 108.0)
(==) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(==) RandR enabled
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: Loaded and initialized /usr/lib/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event1"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Power Button" (/dev/input/event0)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event0"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/event2)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/event2"
(II) "CHICONY USB Keyboard": Found keys
(II) "CHICONY USB Keyboard": Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/event3)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/event3"
(II) "CHICONY USB Keyboard": Found 3 mouse buttons
(II) "CHICONY USB Keyboard": Found scroll wheel(s)
(II) "CHICONY USB Keyboard": Found relative axes
(II) "CHICONY USB Keyboard": Found x and y relative axes
(II) "CHICONY USB Keyboard": Configuring as mouse
(**) "CHICONY USB Keyboard": YAxisMapping: buttons 4 and 5
(**) "CHICONY USB Keyboard": EmulateWheelButton: 4, EmulateWheelInertia: 10, 
EmulateWheelTimeout: 200
(**) "CHICONY USB Keyboard": (accel) keeping acceleration scheme 1
(**) "CHICONY USB Keyboard": (accel) acceleration profile 0
(II) "CHICONY USB Keyboard": initialized for relative axes.
(II) config/udev: Adding input device "CHICONY USB Keyboard" 
(/dev/input/mouse0)
(**) "CHICONY USB Keyboard": always reports core events
(**) "CHICONY USB Keyboard": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""CHICONY USB Keyboard""
(II) config/udev: Adding input device "ImPS/2 Logitech Wheel Mouse" 
(/dev/input/event5)
(**) "ImPS/2 Logitech Wheel Mouse": always reports core events
(**) "ImPS/2 Logitech Wheel Mouse": Device: "/dev/input/event5"
(II) "ImPS/2 Logitech Wheel Mouse": Found 3 mouse buttons
(II) "ImPS/2 Logitech Wheel Mouse": Found scroll wheel(s)
(II) "ImPS/2 Logitech Wheel Mouse": Found relative axes
(II) "ImPS/2 Logitech Wheel Mouse": Found x and y relative axes
(II) "ImPS/2 Logitech Wheel Mouse": Configuring as mouse
(**) "ImPS/2 Logitech Wheel Mouse": YAxisMapping: buttons 4 and 5
(**) "ImPS/2 Logitech Wheel Mouse": EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) "ImPS/2 Logitech Wheel Mouse": (accel) keeping acceleration scheme 1
(**) "ImPS/2 Logitech Wheel Mouse": (accel) acceleration profile 0
(II) "ImPS/2 Logitech Wheel Mouse": initialized for relative axes.
(II) config/udev: Adding input device "ImPS/2 Logitech Wheel Mouse" 
(/dev/input/mouse1)
(**) "ImPS/2 Logitech Wheel Mouse": always reports core events
(**) "ImPS/2 Logitech Wheel Mouse": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""ImPS/2 Logitech Wheel Mouse""

-- 
Vincit qui se se vincit
(He is the victor who is victorious over himself)


More information about the linux mailing list