[clug] More info, please - was Re: Tridge's coffee contraption - photos [SEC=PERSONAL]

[Roppola, Antti - BRS]

Or speak to a friendly electrician about appropriate design patterns.
Examples of seperating dangerous work voltages from safe control
voltages should be abundant. Like any security consideration, I'd work
from proven designs than DIY (no coffee is worth a fatality).

BTW, the sci.electronics repair FAQ is a bit random, but contains lots
of intersting information on electrical equipment.
http://www.repairfaq.org/REPAIR/F_Repair.html

Antti 

-----Original Message-----
From: Alastair D'Silva [mailto:alastair at newmillennium.net.au] 
 
Double insulated sounds like a better way to go - move to an acrylic
project box with nylon screws holding the board?


------
IMPORTANT - This message has been issued by The Department of Agriculture, Fisheries and Forestry (DAFF). The information transmitted is for the use of the intended recipient only and may contain sensitive and/or legally privileged material. It is your responsibility to check any attachments for viruses and defects before opening or sending them on. 

Any reproduction, publication, communication, re-transmission, disclosure, dissemination or other use of the information contained in this e-mail by persons or entities other than the intended recipient is prohibited. The taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you have received this e-mail in error please notify the sender and delete all copies of this transmission together with any attachments. If you have received this e-mail as part of a valid mailing list and no longer want to receive a message such as this one advise the sender by return e-mail accordingly. Only e-mail correspondence which includes this footer, has been authorised by DAFF 

------