[clug] USB storage on USB2 with hubs

[Tom.Minchin at csiro.au]

 You can overclock them with a pair of pliers too (well, you can remove
the slight speed reduction Linksys inserted into the CPU).

http://www.nslu2-linux.org/wiki/Main/HomePage

-----Original Message-----
From: linux-bounces+tom.minchin=csiro.au at lists.samba.org
[mailto:linux-bounces+tom.minchin=csiro.au at lists.samba.org] On Behalf Of
Michael Still
Sent: Thursday, 26 January 2006 9:23 AM
To: CLUG List
Subject: [clug] USB storage on USB2 with hubs

I'm using USB storage entirely for my new setup (well, except for a 
smallish boot disk), and have noticed problems with md for SUB devices 
connected to the machine via a USB hub.

Is this just my hub (although I tried a couple), my Via PCI controller, 
or is using a hub with usb storage not generally recommended?

If I can get hubs working reliably, then I might just have to pickup one

of these:

http://www1.linksys.com/products/product.asp?prid=640&scid=43

Given they run Linux and have replaceable firmware...

Any pointers greatly appreciated.

Mikal
-- 
linux mailing list
linux at lists.samba.org
https://lists.samba.org/mailman/listinfo/linux