[clug] mtu = 576 on ppp0
Alex Satrapa
grail at goldweb.com.au
Sat Feb 21 12:28:46 GMT 2004
On 21 Feb 2004, at 20:05, Mick Howe wrote:
> I need to set the max transmission unit = 576 for ppp0
You shouldn't need to set MTU any lower than about 1400, unless there's
a lot more going on behind the scenes than the usual.
If you have shell access, use the command "ifconfig ppp0 mtu 576", or
set the "mru" and "mtu" options in the PPP configuration to 1400 (then
try different sizes) - look in /etc/ppp/options, or perhaps the
PPP/ADSL configuration page on IPCop.
If you're running PPPoA, you should be able to get away with 1460.
Alex Satrapa LPO 5010
Software Engineer Canberra University
Mobile: +61 4 0770 5332 Bruce, ACT, 2617
ICQ:5691434 Jabber:Bunyip at jabber.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PGP.sig
Type: application/pgp-signature
Size: 194 bytes
Desc: This is a digitally signed message part
Url : http://lists.samba.org/archive/linux/attachments/20040221/7a3aea8e/PGP.bin
More information about the linux
mailing list